GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)
This commit is contained in:
@@ -0,0 +1,513 @@
|
||||
/*
|
||||
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "dra74x.dtsi"
|
||||
#include "dra7-evm-common.dtsi"
|
||||
#include "dra74x-mmc-iodelay.dtsi"
|
||||
|
||||
/ {
|
||||
model = "TI DRA742";
|
||||
compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */
|
||||
};
|
||||
|
||||
evm_1v8_sw: fixedregulator-evm_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "evm_1v8";
|
||||
vin-supply = <&smps9_reg>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
evm_3v3_sd: fixedregulator-sd {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "evm_3v3_sd";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
enable-active-high;
|
||||
gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
evm_3v3_sw: fixedregulator-evm_3v3_sw {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "evm_3v3_sw";
|
||||
vin-supply = <&sysen1>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
aic_dvdd: fixedregulator-aic_dvdd {
|
||||
/* TPS77018DBVT */
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "aic_dvdd";
|
||||
vin-supply = <&evm_3v3_sw>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
extcon_usb2: extcon_usb2 {
|
||||
compatible = "linux,extcon-usb-gpio";
|
||||
id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
vtt_fixed: fixedregulator-vtt {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vtt_fixed";
|
||||
regulator-min-microvolt = <1350000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
enable-active-high;
|
||||
vin-supply = <&sysen2>;
|
||||
gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&dra7_pmx_core {
|
||||
dcan1_pins_default: dcan1_pins_default {
|
||||
pinctrl-single,pins = <
|
||||
DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
|
||||
DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
|
||||
>;
|
||||
};
|
||||
|
||||
dcan1_pins_sleep: dcan1_pins_sleep {
|
||||
pinctrl-single,pins = <
|
||||
DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
|
||||
DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */
|
||||
>;
|
||||
};
|
||||
|
||||
mmc1_pins_default: mmc1_pins_default {
|
||||
pinctrl-single,pins = <
|
||||
DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
|
||||
DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
|
||||
DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
|
||||
DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
|
||||
DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
|
||||
DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
|
||||
DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
|
||||
>;
|
||||
};
|
||||
|
||||
mmc2_pins_default: mmc2_pins_default {
|
||||
pinctrl-single,pins = <
|
||||
DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
|
||||
DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
|
||||
DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
|
||||
DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
|
||||
DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
|
||||
DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
|
||||
DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
|
||||
DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
|
||||
DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
|
||||
DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
tps659038: tps659038@58 {
|
||||
compatible = "ti,tps659038";
|
||||
reg = <0x58>;
|
||||
ti,palmas-override-powerhold;
|
||||
ti,system-power-controller;
|
||||
|
||||
tps659038_pmic {
|
||||
compatible = "ti,tps659038-pmic";
|
||||
|
||||
regulators {
|
||||
smps123_reg: smps123 {
|
||||
/* VDD_MPU */
|
||||
regulator-name = "smps123";
|
||||
regulator-min-microvolt = < 850000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
smps45_reg: smps45 {
|
||||
/* VDD_DSPEVE */
|
||||
regulator-name = "smps45";
|
||||
regulator-min-microvolt = < 850000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
smps6_reg: smps6 {
|
||||
/* VDD_GPU - over VDD_SMPS6 */
|
||||
regulator-name = "smps6";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
smps7_reg: smps7 {
|
||||
/* CORE_VDD */
|
||||
regulator-name = "smps7";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
smps8_reg: smps8 {
|
||||
/* VDD_IVAHD */
|
||||
regulator-name = "smps8";
|
||||
regulator-min-microvolt = < 850000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
smps9_reg: smps9 {
|
||||
/* VDDS1V8 */
|
||||
regulator-name = "smps9";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldo1_reg: ldo1 {
|
||||
/* LDO1_OUT --> SDIO */
|
||||
regulator-name = "ldo1";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldo2_reg: ldo2 {
|
||||
/* VDD_RTCIO */
|
||||
/* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
|
||||
regulator-name = "ldo2";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldo3_reg: ldo3 {
|
||||
/* VDDA_1V8_PHY */
|
||||
regulator-name = "ldo3";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldo9_reg: ldo9 {
|
||||
/* VDD_RTC */
|
||||
regulator-name = "ldo9";
|
||||
regulator-min-microvolt = <1050000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-allow-bypass;
|
||||
};
|
||||
|
||||
ldoln_reg: ldoln {
|
||||
/* VDDA_1V8_PLL */
|
||||
regulator-name = "ldoln";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldousb_reg: ldousb {
|
||||
/* VDDA_3V_USB: VDDA_USBHS33 */
|
||||
regulator-name = "ldousb";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
/* REGEN1 is unused */
|
||||
|
||||
regen2: regen2 {
|
||||
/* Needed for PMIC internal resources */
|
||||
regulator-name = "regen2";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* REGEN3 is unused */
|
||||
|
||||
sysen1: sysen1 {
|
||||
/* PMIC_REGEN_3V3 */
|
||||
regulator-name = "sysen1";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sysen2: sysen2 {
|
||||
/* PMIC_REGEN_DDR */
|
||||
regulator-name = "sysen2";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pcf_lcd: gpio@20 {
|
||||
compatible = "ti,pcf8575", "nxp,pcf8575";
|
||||
reg = <0x20>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-parent = <&gpio6>;
|
||||
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
pcf_gpio_21: gpio@21 {
|
||||
compatible = "ti,pcf8575", "nxp,pcf8575";
|
||||
reg = <0x21>;
|
||||
lines-initial-states = <0x1408>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-parent = <&gpio6>;
|
||||
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
tlv320aic3106: tlv320aic3106@19 {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "ti,tlv320aic3106";
|
||||
reg = <0x19>;
|
||||
adc-settle-ms = <40>;
|
||||
ai3x-micbias-vg = <1>; /* 2.0V */
|
||||
status = "okay";
|
||||
|
||||
/* Regulators */
|
||||
AVDD-supply = <&evm_3v3_sw>;
|
||||
IOVDD-supply = <&evm_3v3_sw>;
|
||||
DRVDD-supply = <&evm_3v3_sw>;
|
||||
DVDD-supply = <&aic_dvdd>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
pcf_hdmi: gpio@26 {
|
||||
compatible = "ti,pcf8575", "nxp,pcf8575";
|
||||
reg = <0x26>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
p1 {
|
||||
/* vin6_sel_s0: high: VIN6, low: audio */
|
||||
gpio-hog;
|
||||
gpios = <1 GPIO_ACTIVE_HIGH>;
|
||||
output-low;
|
||||
line-name = "vin6_sel_s0";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
status = "okay";
|
||||
vmmc-supply = <&evm_3v3_sd>;
|
||||
vqmmc-supply = <&ldo1_reg>;
|
||||
bus-width = <4>;
|
||||
/*
|
||||
* SDCD signal is not being used here - using the fact that GPIO mode
|
||||
* is always hardwired.
|
||||
*/
|
||||
cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50-rev11", "sdr104-rev11", "ddr50", "sdr104";
|
||||
pinctrl-0 = <&mmc1_pins_default>;
|
||||
pinctrl-1 = <&mmc1_pins_hs>;
|
||||
pinctrl-2 = <&mmc1_pins_sdr12>;
|
||||
pinctrl-3 = <&mmc1_pins_sdr25>;
|
||||
pinctrl-4 = <&mmc1_pins_sdr50>;
|
||||
pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>;
|
||||
pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>;
|
||||
pinctrl-7 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
|
||||
pinctrl-8 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
status = "okay";
|
||||
vmmc-supply = <&evm_1v8_sw>;
|
||||
bus-width = <8>;
|
||||
pinctrl-names = "default", "hs", "ddr_1_8v-rev11", "ddr_1_8v", "hs200_1_8v-rev11", "hs200_1_8v";
|
||||
pinctrl-0 = <&mmc2_pins_default>;
|
||||
pinctrl-1 = <&mmc2_pins_hs>;
|
||||
pinctrl-2 = <&mmc2_pins_ddr_1_8v_rev11 &mmc2_iodelay_ddr_1_8v_rev11_conf>;
|
||||
pinctrl-3 = <&mmc2_pins_ddr_rev20>;
|
||||
pinctrl-4 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev11_conf>;
|
||||
pinctrl-5 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu0-supply = <&smps123_reg>;
|
||||
};
|
||||
|
||||
&omap_dwc3_2 {
|
||||
extcon = <&extcon_usb2>;
|
||||
};
|
||||
|
||||
&elm {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpmc {
|
||||
/*
|
||||
* For the existing IOdelay configuration via U-Boot we don't
|
||||
* support NAND on dra7-evm. Keep it disabled. Enabling it
|
||||
* requires a different configuration by U-Boot.
|
||||
*/
|
||||
status = "disabled";
|
||||
ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */
|
||||
nand@0,0 {
|
||||
compatible = "ti,omap2-nand";
|
||||
reg = <0 0 4>; /* device IO registers */
|
||||
interrupt-parent = <&gpmc>;
|
||||
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
|
||||
<1 IRQ_TYPE_NONE>; /* termcount */
|
||||
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
|
||||
ti,nand-xfer-type = "prefetch-dma";
|
||||
ti,nand-ecc-opt = "bch8";
|
||||
ti,elm-id = <&elm>;
|
||||
nand-bus-width = <16>;
|
||||
gpmc,device-width = <2>;
|
||||
gpmc,sync-clk-ps = <0>;
|
||||
gpmc,cs-on-ns = <0>;
|
||||
gpmc,cs-rd-off-ns = <80>;
|
||||
gpmc,cs-wr-off-ns = <80>;
|
||||
gpmc,adv-on-ns = <0>;
|
||||
gpmc,adv-rd-off-ns = <60>;
|
||||
gpmc,adv-wr-off-ns = <60>;
|
||||
gpmc,we-on-ns = <10>;
|
||||
gpmc,we-off-ns = <50>;
|
||||
gpmc,oe-on-ns = <4>;
|
||||
gpmc,oe-off-ns = <40>;
|
||||
gpmc,access-ns = <40>;
|
||||
gpmc,wr-access-ns = <80>;
|
||||
gpmc,rd-cycle-ns = <80>;
|
||||
gpmc,wr-cycle-ns = <80>;
|
||||
gpmc,bus-turnaround-ns = <0>;
|
||||
gpmc,cycle2cycle-delay-ns = <0>;
|
||||
gpmc,clk-activation-ns = <0>;
|
||||
gpmc,wr-data-mux-bus-ns = <0>;
|
||||
/* MTD partition table */
|
||||
/* All SPL-* partitions are sized to minimal length
|
||||
* which can be independently programmable. For
|
||||
* NAND flash this is equal to size of erase-block */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
partition@0 {
|
||||
label = "NAND.SPL";
|
||||
reg = <0x00000000 0x000020000>;
|
||||
};
|
||||
partition@1 {
|
||||
label = "NAND.SPL.backup1";
|
||||
reg = <0x00020000 0x00020000>;
|
||||
};
|
||||
partition@2 {
|
||||
label = "NAND.SPL.backup2";
|
||||
reg = <0x00040000 0x00020000>;
|
||||
};
|
||||
partition@3 {
|
||||
label = "NAND.SPL.backup3";
|
||||
reg = <0x00060000 0x00020000>;
|
||||
};
|
||||
partition@4 {
|
||||
label = "NAND.u-boot-spl-os";
|
||||
reg = <0x00080000 0x00040000>;
|
||||
};
|
||||
partition@5 {
|
||||
label = "NAND.u-boot";
|
||||
reg = <0x000c0000 0x00100000>;
|
||||
};
|
||||
partition@6 {
|
||||
label = "NAND.u-boot-env";
|
||||
reg = <0x001c0000 0x00020000>;
|
||||
};
|
||||
partition@7 {
|
||||
label = "NAND.u-boot-env.backup1";
|
||||
reg = <0x001e0000 0x00020000>;
|
||||
};
|
||||
partition@8 {
|
||||
label = "NAND.kernel";
|
||||
reg = <0x00200000 0x00800000>;
|
||||
};
|
||||
partition@9 {
|
||||
label = "NAND.file-system";
|
||||
reg = <0x00a00000 0x0f600000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb2_phy1 {
|
||||
phy-supply = <&ldousb_reg>;
|
||||
};
|
||||
|
||||
&usb2_phy2 {
|
||||
phy-supply = <&ldousb_reg>;
|
||||
};
|
||||
|
||||
&gpio7 {
|
||||
ti,no-reset-on-init;
|
||||
ti,no-idle-on-init;
|
||||
};
|
||||
|
||||
&mac {
|
||||
status = "okay";
|
||||
dual_emac;
|
||||
};
|
||||
|
||||
&cpsw_emac0 {
|
||||
phy-handle = <ðphy0>;
|
||||
phy-mode = "rgmii";
|
||||
dual_emac_res_vlan = <1>;
|
||||
};
|
||||
|
||||
&cpsw_emac1 {
|
||||
phy-handle = <ðphy1>;
|
||||
phy-mode = "rgmii";
|
||||
dual_emac_res_vlan = <2>;
|
||||
};
|
||||
|
||||
&davinci_mdio {
|
||||
ethphy0: ethernet-phy@2 {
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
ethphy1: ethernet-phy@3 {
|
||||
reg = <3>;
|
||||
};
|
||||
};
|
||||
|
||||
&dcan1 {
|
||||
status = "ok"
|
||||
pinctrl-names = "default", "sleep", "active";
|
||||
pinctrl-0 = <&dcan1_pins_sleep>;
|
||||
pinctrl-1 = <&dcan1_pins_sleep>;
|
||||
pinctrl-2 = <&dcan1_pins_default>;
|
||||
};
|
||||
|
||||
&pcie1_rc {
|
||||
status = "okay";
|
||||
};
|
||||
Reference in New Issue
Block a user