GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)
This commit is contained in:
@@ -0,0 +1,547 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2016 Andreas Färber
|
||||
*
|
||||
* Copyright (c) 2016 BayLibre, SAS.
|
||||
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
||||
*
|
||||
* Copyright (c) 2016 Endless Computers, Inc.
|
||||
* Author: Carlo Caione <carlo@endlessm.com>
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
/ {
|
||||
interrupt-parent = <&gic>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
/* 16 MiB reserved for Hardware ROM Firmware */
|
||||
hwrom_reserved: hwrom@0 {
|
||||
reg = <0x0 0x0 0x0 0x1000000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
|
||||
secmon_reserved: secmon@10000000 {
|
||||
reg = <0x0 0x10000000 0x0 0x200000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
/* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
|
||||
secmon_reserved_alt: secmon@5000000 {
|
||||
reg = <0x0 0x05000000 0x0 0x300000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
linux,cma {
|
||||
compatible = "shared-dma-pool";
|
||||
reusable;
|
||||
size = <0x0 0x10000000>;
|
||||
alignment = <0x0 0x400000>;
|
||||
linux,cma-default;
|
||||
};
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <0x2>;
|
||||
#size-cells = <0x0>;
|
||||
|
||||
cpu0: cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53", "arm,armv8";
|
||||
reg = <0x0 0x0>;
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&l2>;
|
||||
clocks = <&scpi_dvfs 0>;
|
||||
};
|
||||
|
||||
cpu1: cpu@1 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53", "arm,armv8";
|
||||
reg = <0x0 0x1>;
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&l2>;
|
||||
clocks = <&scpi_dvfs 0>;
|
||||
};
|
||||
|
||||
cpu2: cpu@2 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53", "arm,armv8";
|
||||
reg = <0x0 0x2>;
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&l2>;
|
||||
clocks = <&scpi_dvfs 0>;
|
||||
};
|
||||
|
||||
cpu3: cpu@3 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53", "arm,armv8";
|
||||
reg = <0x0 0x3>;
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&l2>;
|
||||
clocks = <&scpi_dvfs 0>;
|
||||
};
|
||||
|
||||
l2: l2-cache0 {
|
||||
compatible = "cache";
|
||||
};
|
||||
};
|
||||
|
||||
arm-pmu {
|
||||
compatible = "arm,cortex-a53-pmu";
|
||||
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
|
||||
};
|
||||
|
||||
psci {
|
||||
compatible = "arm,psci-0.2";
|
||||
method = "smc";
|
||||
};
|
||||
|
||||
timer {
|
||||
compatible = "arm,armv8-timer";
|
||||
interrupts = <GIC_PPI 13
|
||||
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 14
|
||||
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 11
|
||||
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 10
|
||||
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
|
||||
};
|
||||
|
||||
xtal: xtal-clk {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <24000000>;
|
||||
clock-output-names = "xtal";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
firmware {
|
||||
sm: secure-monitor {
|
||||
compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm";
|
||||
};
|
||||
};
|
||||
|
||||
efuse: efuse {
|
||||
compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
read-only;
|
||||
|
||||
sn: sn@14 {
|
||||
reg = <0x14 0x10>;
|
||||
};
|
||||
|
||||
eth_mac: eth_mac@34 {
|
||||
reg = <0x34 0x10>;
|
||||
};
|
||||
|
||||
bid: bid@46 {
|
||||
reg = <0x46 0x30>;
|
||||
};
|
||||
};
|
||||
|
||||
scpi {
|
||||
compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
|
||||
mboxes = <&mailbox 1 &mailbox 2>;
|
||||
shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
|
||||
|
||||
scpi_clocks: clocks {
|
||||
compatible = "arm,scpi-clocks";
|
||||
|
||||
scpi_dvfs: scpi_clocks@0 {
|
||||
compatible = "arm,scpi-dvfs-clocks";
|
||||
#clock-cells = <1>;
|
||||
clock-indices = <0>;
|
||||
clock-output-names = "vcpu";
|
||||
};
|
||||
};
|
||||
|
||||
scpi_sensors: sensors {
|
||||
compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
|
||||
#thermal-sensor-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
soc {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
cbus: bus@c1100000 {
|
||||
compatible = "simple-bus";
|
||||
reg = <0x0 0xc1100000 0x0 0x100000>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
|
||||
|
||||
gpio_intc: interrupt-controller@9880 {
|
||||
compatible = "amlogic,meson-gpio-intc";
|
||||
reg = <0x0 0x9880 0x0 0x10>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
reset: reset-controller@4404 {
|
||||
compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset";
|
||||
reg = <0x0 0x04404 0x0 0x9c>;
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
uart_A: serial@84c0 {
|
||||
compatible = "amlogic,meson-gx-uart";
|
||||
reg = <0x0 0x84c0 0x0 0x18>;
|
||||
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart_B: serial@84dc {
|
||||
compatible = "amlogic,meson-gx-uart";
|
||||
reg = <0x0 0x84dc 0x0 0x18>;
|
||||
interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c_A: i2c@8500 {
|
||||
compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
|
||||
reg = <0x0 0x08500 0x0 0x20>;
|
||||
interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pwm_ab: pwm@8550 {
|
||||
compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
|
||||
reg = <0x0 0x08550 0x0 0x10>;
|
||||
#pwm-cells = <3>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pwm_cd: pwm@8650 {
|
||||
compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
|
||||
reg = <0x0 0x08650 0x0 0x10>;
|
||||
#pwm-cells = <3>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
saradc: adc@8680 {
|
||||
compatible = "amlogic,meson-saradc";
|
||||
reg = <0x0 0x8680 0x0 0x34>;
|
||||
#io-channel-cells = <1>;
|
||||
interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pwm_ef: pwm@86c0 {
|
||||
compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
|
||||
reg = <0x0 0x086c0 0x0 0x10>;
|
||||
#pwm-cells = <3>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart_C: serial@8700 {
|
||||
compatible = "amlogic,meson-gx-uart";
|
||||
reg = <0x0 0x8700 0x0 0x18>;
|
||||
interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c_B: i2c@87c0 {
|
||||
compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
|
||||
reg = <0x0 0x087c0 0x0 0x20>;
|
||||
interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c_C: i2c@87e0 {
|
||||
compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
|
||||
reg = <0x0 0x087e0 0x0 0x20>;
|
||||
interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spicc: spi@8d80 {
|
||||
compatible = "amlogic,meson-gx-spicc";
|
||||
reg = <0x0 0x08d80 0x0 0x80>;
|
||||
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spifc: spi@8c80 {
|
||||
compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc";
|
||||
reg = <0x0 0x08c80 0x0 0x80>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
watchdog@98d0 {
|
||||
compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt";
|
||||
reg = <0x0 0x098d0 0x0 0x10>;
|
||||
clocks = <&xtal>;
|
||||
};
|
||||
};
|
||||
|
||||
gic: interrupt-controller@c4301000 {
|
||||
compatible = "arm,gic-400";
|
||||
reg = <0x0 0xc4301000 0 0x1000>,
|
||||
<0x0 0xc4302000 0 0x2000>,
|
||||
<0x0 0xc4304000 0 0x2000>,
|
||||
<0x0 0xc4306000 0 0x2000>;
|
||||
interrupt-controller;
|
||||
interrupts = <GIC_PPI 9
|
||||
(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
|
||||
#interrupt-cells = <3>;
|
||||
#address-cells = <0>;
|
||||
};
|
||||
|
||||
sram: sram@c8000000 {
|
||||
compatible = "amlogic,meson-gx-sram", "amlogic,meson-gxbb-sram", "mmio-sram";
|
||||
reg = <0x0 0xc8000000 0x0 0x14000>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x0 0xc8000000 0x14000>;
|
||||
|
||||
cpu_scp_lpri: scp-shmem@0 {
|
||||
compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
|
||||
reg = <0x13000 0x400>;
|
||||
};
|
||||
|
||||
cpu_scp_hpri: scp-shmem@200 {
|
||||
compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
|
||||
reg = <0x13400 0x400>;
|
||||
};
|
||||
};
|
||||
|
||||
aobus: bus@c8100000 {
|
||||
compatible = "simple-bus";
|
||||
reg = <0x0 0xc8100000 0x0 0x100000>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
|
||||
|
||||
sysctrl_AO: sys-ctrl@0 {
|
||||
compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
|
||||
reg = <0x0 0x0 0x0 0x100>;
|
||||
|
||||
pwrc_vpu: power-controller-vpu {
|
||||
compatible = "amlogic,meson-gx-pwrc-vpu";
|
||||
#power-domain-cells = <0>;
|
||||
amlogic,hhi-sysctrl = <&sysctrl>;
|
||||
};
|
||||
|
||||
clkc_AO: clock-controller {
|
||||
compatible = "amlogic,meson-gx-aoclkc";
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
cec_AO: cec@100 {
|
||||
compatible = "amlogic,meson-gx-ao-cec";
|
||||
reg = <0x0 0x00100 0x0 0x14>;
|
||||
interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
|
||||
};
|
||||
|
||||
sec_AO: ao-secure@140 {
|
||||
compatible = "amlogic,meson-gx-ao-secure", "syscon";
|
||||
reg = <0x0 0x140 0x0 0x140>;
|
||||
amlogic,has-chip-id;
|
||||
};
|
||||
|
||||
uart_AO: serial@4c0 {
|
||||
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
|
||||
reg = <0x0 0x004c0 0x0 0x18>;
|
||||
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart_AO_B: serial@4e0 {
|
||||
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
|
||||
reg = <0x0 0x004e0 0x0 0x18>;
|
||||
interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c_AO: i2c@500 {
|
||||
compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
|
||||
reg = <0x0 0x500 0x0 0x20>;
|
||||
interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pwm_AO_ab: pwm@550 {
|
||||
compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm";
|
||||
reg = <0x0 0x00550 0x0 0x10>;
|
||||
#pwm-cells = <3>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ir: ir@580 {
|
||||
compatible = "amlogic,meson-gx-ir", "amlogic,meson-gxbb-ir";
|
||||
reg = <0x0 0x00580 0x0 0x40>;
|
||||
interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
periphs: periphs@c8834000 {
|
||||
compatible = "simple-bus";
|
||||
reg = <0x0 0xc8834000 0x0 0x2000>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
|
||||
|
||||
hwrng: rng {
|
||||
compatible = "amlogic,meson-rng";
|
||||
reg = <0x0 0x0 0x0 0x4>;
|
||||
};
|
||||
};
|
||||
|
||||
dmcbus: bus@c8838000 {
|
||||
compatible = "simple-bus";
|
||||
reg = <0x0 0xc8838000 0x0 0x400>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x0 0x0 0x0 0xc8838000 0x0 0x400>;
|
||||
|
||||
canvas: video-lut@48 {
|
||||
compatible = "amlogic,canvas";
|
||||
reg = <0x0 0x48 0x0 0x14>;
|
||||
};
|
||||
};
|
||||
|
||||
hiubus: bus@c883c000 {
|
||||
compatible = "simple-bus";
|
||||
reg = <0x0 0xc883c000 0x0 0x2000>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
|
||||
|
||||
sysctrl: system-controller@0 {
|
||||
compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon";
|
||||
reg = <0 0 0 0x400>;
|
||||
};
|
||||
|
||||
mailbox: mailbox@404 {
|
||||
compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
|
||||
reg = <0 0x404 0 0x4c>;
|
||||
interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
|
||||
#mbox-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
ethmac: ethernet@c9410000 {
|
||||
compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac";
|
||||
reg = <0x0 0xc9410000 0x0 0x10000
|
||||
0x0 0xc8834540 0x0 0x4>;
|
||||
interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "macirq";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
apb: apb@d0000000 {
|
||||
compatible = "simple-bus";
|
||||
reg = <0x0 0xd0000000 0x0 0x200000>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
|
||||
|
||||
sd_emmc_a: mmc@70000 {
|
||||
compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
|
||||
reg = <0x0 0x70000 0x0 0x800>;
|
||||
interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sd_emmc_b: mmc@72000 {
|
||||
compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
|
||||
reg = <0x0 0x72000 0x0 0x800>;
|
||||
interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sd_emmc_c: mmc@74000 {
|
||||
compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
|
||||
reg = <0x0 0x74000 0x0 0x800>;
|
||||
interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
vpu: vpu@d0100000 {
|
||||
compatible = "amlogic,meson-gx-vpu";
|
||||
reg = <0x0 0xd0100000 0x0 0x100000>,
|
||||
<0x0 0xc883c000 0x0 0x1000>,
|
||||
<0x0 0xc8838000 0x0 0x1000>;
|
||||
reg-names = "vpu", "hhi", "dmc";
|
||||
interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
/* CVBS VDAC output port */
|
||||
cvbs_vdac_port: port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
/* HDMI-TX output port */
|
||||
hdmi_tx_port: port@1 {
|
||||
reg = <1>;
|
||||
|
||||
hdmi_tx_out: endpoint {
|
||||
remote-endpoint = <&hdmi_tx_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi_tx: hdmi-tx@c883a000 {
|
||||
compatible = "amlogic,meson-gx-dw-hdmi";
|
||||
reg = <0x0 0xc883a000 0x0 0x1c>;
|
||||
interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
|
||||
/* VPU VENC Input */
|
||||
hdmi_tx_venc_port: port@0 {
|
||||
reg = <0>;
|
||||
|
||||
hdmi_tx_in: endpoint {
|
||||
remote-endpoint = <&hdmi_tx_out>;
|
||||
};
|
||||
};
|
||||
|
||||
/* TMDS Output */
|
||||
hdmi_tx_tmds_port: port@1 {
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
Reference in New Issue
Block a user