GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)
This commit is contained in:
@@ -0,0 +1,441 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the Alt board
|
||||
*
|
||||
* Copyright (C) 2014 Renesas Electronics Corporation
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a7794.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
model = "Alt";
|
||||
compatible = "renesas,alt", "renesas,r8a7794";
|
||||
|
||||
aliases {
|
||||
serial0 = &scif2;
|
||||
i2c9 = &gpioi2c1;
|
||||
i2c10 = &gpioi2c4;
|
||||
i2c11 = &i2chdmi;
|
||||
i2c12 = &i2cexio4;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@40000000 {
|
||||
device_type = "memory";
|
||||
reg = <0 0x40000000 0 0x40000000>;
|
||||
};
|
||||
|
||||
d3_3v: regulator-d3-3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "D3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_sdhi0: regulator-vcc-sdhi0 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "SDHI0 Vcc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&gpio2 26 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vccq_sdhi0: regulator-vccq-sdhi0 {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "SDHI0 VccQ";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <1>;
|
||||
states = <3300000 1
|
||||
1800000 0>;
|
||||
};
|
||||
|
||||
vcc_sdhi1: regulator-vcc-sdhi1 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "SDHI1 Vcc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vccq_sdhi1: regulator-vccq-sdhi1 {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "SDHI1 VccQ";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <1>;
|
||||
states = <3300000 1
|
||||
1800000 0>;
|
||||
};
|
||||
|
||||
lbsc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
|
||||
vga-encoder {
|
||||
compatible = "adi,adv7123";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
adv7123_in: endpoint {
|
||||
remote-endpoint = <&du_out_rgb1>;
|
||||
};
|
||||
};
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
adv7123_out: endpoint {
|
||||
remote-endpoint = <&vga_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vga {
|
||||
compatible = "vga-connector";
|
||||
|
||||
port {
|
||||
vga_in: endpoint {
|
||||
remote-endpoint = <&adv7123_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
x2_clk: x2-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <74250000>;
|
||||
};
|
||||
|
||||
x13_clk: x13-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <148500000>;
|
||||
};
|
||||
|
||||
gpioi2c1: i2c-9 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "i2c-gpio";
|
||||
status = "disabled";
|
||||
scl-gpios = <&gpio4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
sda-gpios = <&gpio4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
};
|
||||
|
||||
gpioi2c4: i2c-10 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "i2c-gpio";
|
||||
status = "disabled";
|
||||
scl-gpios = <&gpio4 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
sda-gpios = <&gpio4 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
i2c-gpio,delay-us = <5>;
|
||||
};
|
||||
|
||||
/*
|
||||
* A fallback to GPIO is provided for I2C1.
|
||||
*/
|
||||
i2chdmi: i2c-11 {
|
||||
compatible = "i2c-demux-pinctrl";
|
||||
i2c-parent = <&i2c1>, <&gpioi2c1>;
|
||||
i2c-bus-name = "i2c-hdmi";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
composite-in@20 {
|
||||
compatible = "adi,adv7180";
|
||||
reg = <0x20>;
|
||||
remote = <&vin0>;
|
||||
|
||||
port {
|
||||
adv7180: endpoint {
|
||||
bus-width = <8>;
|
||||
remote-endpoint = <&vin0ep>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "renesas,r1ex24002", "atmel,24c02";
|
||||
reg = <0x50>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* I2C4 is routed to EXIO connector B, pins 73 (SCL) + 74 (SDA).
|
||||
* A fallback to GPIO is provided.
|
||||
*/
|
||||
i2cexio4: i2c-14 {
|
||||
compatible = "i2c-demux-pinctrl";
|
||||
i2c-parent = <&i2c4>, <&gpioi2c4>;
|
||||
i2c-bus-name = "i2c-exio4";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&du {
|
||||
pinctrl-0 = <&du_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
|
||||
<&x13_clk>, <&x2_clk>;
|
||||
clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
|
||||
|
||||
ports {
|
||||
port@1 {
|
||||
endpoint {
|
||||
remote-endpoint = <&adv7123_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&extal_clk {
|
||||
clock-frequency = <20000000>;
|
||||
};
|
||||
|
||||
&pfc {
|
||||
pinctrl-0 = <&scif_clk_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
du_pins: du {
|
||||
groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
|
||||
function = "du1";
|
||||
};
|
||||
|
||||
scif2_pins: scif2 {
|
||||
groups = "scif2_data";
|
||||
function = "scif2";
|
||||
};
|
||||
|
||||
scif_clk_pins: scif_clk {
|
||||
groups = "scif_clk";
|
||||
function = "scif_clk";
|
||||
};
|
||||
|
||||
ether_pins: ether {
|
||||
groups = "eth_link", "eth_mdio", "eth_rmii";
|
||||
function = "eth";
|
||||
};
|
||||
|
||||
phy1_pins: phy1 {
|
||||
groups = "intc_irq8";
|
||||
function = "intc";
|
||||
};
|
||||
|
||||
i2c1_pins: i2c1 {
|
||||
groups = "i2c1";
|
||||
function = "i2c1";
|
||||
};
|
||||
|
||||
i2c4_pins: i2c4 {
|
||||
groups = "i2c4";
|
||||
function = "i2c4";
|
||||
};
|
||||
|
||||
vin0_pins: vin0 {
|
||||
groups = "vin0_data8", "vin0_clk";
|
||||
function = "vin0";
|
||||
};
|
||||
|
||||
mmcif0_pins: mmcif0 {
|
||||
groups = "mmc_data8", "mmc_ctrl";
|
||||
function = "mmc";
|
||||
};
|
||||
|
||||
sdhi0_pins: sd0 {
|
||||
groups = "sdhi0_data4", "sdhi0_ctrl";
|
||||
function = "sdhi0";
|
||||
power-source = <3300>;
|
||||
};
|
||||
|
||||
sdhi0_pins_uhs: sd0_uhs {
|
||||
groups = "sdhi0_data4", "sdhi0_ctrl";
|
||||
function = "sdhi0";
|
||||
power-source = <1800>;
|
||||
};
|
||||
|
||||
sdhi1_pins: sd1 {
|
||||
groups = "sdhi1_data4", "sdhi1_ctrl";
|
||||
function = "sdhi1";
|
||||
power-source = <3300>;
|
||||
};
|
||||
|
||||
sdhi1_pins_uhs: sd1_uhs {
|
||||
groups = "sdhi1_data4", "sdhi1_ctrl";
|
||||
function = "sdhi1";
|
||||
power-source = <1800>;
|
||||
};
|
||||
};
|
||||
|
||||
&cmt0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pfc {
|
||||
qspi_pins: qspi {
|
||||
groups = "qspi_ctrl", "qspi_data4";
|
||||
function = "qspi";
|
||||
};
|
||||
};
|
||||
|
||||
ðer {
|
||||
pinctrl-0 = <ðer_pins &phy1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy-handle = <&phy1>;
|
||||
renesas,ether-link-active-low;
|
||||
status = "okay";
|
||||
|
||||
phy1: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
interrupt-parent = <&irqc0>;
|
||||
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
|
||||
micrel,led-mode = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&mmcif0 {
|
||||
pinctrl-0 = <&mmcif0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
vmmc-supply = <&d3_3v>;
|
||||
vqmmc-supply = <&d3_3v>;
|
||||
bus-width = <8>;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rwdt {
|
||||
timeout-sec = <60>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhi0 {
|
||||
pinctrl-0 = <&sdhi0_pins>;
|
||||
pinctrl-1 = <&sdhi0_pins_uhs>;
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
|
||||
vmmc-supply = <&vcc_sdhi0>;
|
||||
vqmmc-supply = <&vccq_sdhi0>;
|
||||
cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
|
||||
wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
|
||||
sd-uhs-sdr50;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhi1 {
|
||||
pinctrl-0 = <&sdhi1_pins>;
|
||||
pinctrl-1 = <&sdhi1_pins_uhs>;
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
|
||||
vmmc-supply = <&vcc_sdhi1>;
|
||||
vqmmc-supply = <&vccq_sdhi1>;
|
||||
cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
|
||||
wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
|
||||
sd-uhs-sdr50;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
pinctrl-names = "i2c-hdmi";
|
||||
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
pinctrl-0 = <&i2c4_pins>;
|
||||
pinctrl-names = "i2c-exio4";
|
||||
};
|
||||
|
||||
&vin0 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&vin0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
port {
|
||||
vin0ep: endpoint {
|
||||
remote-endpoint = <&adv7180>;
|
||||
bus-width = <8>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&scif2 {
|
||||
pinctrl-0 = <&scif2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif_clk {
|
||||
clock-frequency = <14745600>;
|
||||
};
|
||||
|
||||
&qspi {
|
||||
pinctrl-0 = <&qspi_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "spansion,s25fl512s", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <30000000>;
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-cpol;
|
||||
spi-cpha;
|
||||
m25p,fast-read;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "loader";
|
||||
reg = <0x00000000 0x00040000>;
|
||||
read-only;
|
||||
};
|
||||
partition@40000 {
|
||||
label = "system";
|
||||
reg = <0x00040000 0x00040000>;
|
||||
read-only;
|
||||
};
|
||||
partition@80000 {
|
||||
label = "user";
|
||||
reg = <0x00080000 0x03f80000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
Reference in New Issue
Block a user