GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)
This commit is contained in:
@@ -0,0 +1,208 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ or MIT)
|
||||
/*
|
||||
* Copyright (C) 2018 Amarula Solutions
|
||||
* Author: Jagan Teki <jagan@amarulasolutions.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "sun50i-h6.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
model = "OrangePi One Plus";
|
||||
compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
power {
|
||||
label = "orangepi:red:power";
|
||||
gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
status {
|
||||
label = "orangepi:green:status";
|
||||
gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
|
||||
};
|
||||
};
|
||||
|
||||
reg_vcc5v: vcc5v {
|
||||
/* board wide 5V supply directly from the DC jack */
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc-5v";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehci3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
vmmc-supply = <®_cldo1>;
|
||||
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
|
||||
bus-width = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ohci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ohci3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&r_i2c {
|
||||
status = "okay";
|
||||
|
||||
axp805: pmic@36 {
|
||||
compatible = "x-powers,axp805", "x-powers,axp806";
|
||||
reg = <0x36>;
|
||||
interrupt-parent = <&r_intc>;
|
||||
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
x-powers,self-working-mode;
|
||||
vina-supply = <®_vcc5v>;
|
||||
vinb-supply = <®_vcc5v>;
|
||||
vinc-supply = <®_vcc5v>;
|
||||
vind-supply = <®_vcc5v>;
|
||||
vine-supply = <®_vcc5v>;
|
||||
aldoin-supply = <®_vcc5v>;
|
||||
bldoin-supply = <®_vcc5v>;
|
||||
cldoin-supply = <®_vcc5v>;
|
||||
|
||||
regulators {
|
||||
reg_aldo1: aldo1 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc-pl";
|
||||
};
|
||||
|
||||
reg_aldo2: aldo2 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc-ac200";
|
||||
};
|
||||
|
||||
reg_aldo3: aldo3 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc25-dram";
|
||||
};
|
||||
|
||||
reg_bldo1: bldo1 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc-bias-pll";
|
||||
};
|
||||
|
||||
reg_bldo2: bldo2 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc-efuse-pcie-hdmi-io";
|
||||
};
|
||||
|
||||
reg_bldo3: bldo3 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc-dcxoio";
|
||||
};
|
||||
|
||||
bldo4 {
|
||||
/* unused */
|
||||
};
|
||||
|
||||
reg_cldo1: cldo1 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc-3v3";
|
||||
};
|
||||
|
||||
reg_cldo2: cldo2 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc-wifi-1";
|
||||
};
|
||||
|
||||
reg_cldo3: cldo3 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc-wifi-2";
|
||||
};
|
||||
|
||||
reg_dcdca: dcdca {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <810000>;
|
||||
regulator-max-microvolt = <1080000>;
|
||||
regulator-name = "vdd-cpu";
|
||||
};
|
||||
|
||||
reg_dcdcc: dcdcc {
|
||||
regulator-min-microvolt = <810000>;
|
||||
regulator-max-microvolt = <1080000>;
|
||||
regulator-name = "vdd-gpu";
|
||||
};
|
||||
|
||||
reg_dcdcd: dcdcd {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <960000>;
|
||||
regulator-max-microvolt = <960000>;
|
||||
regulator-name = "vdd-sys";
|
||||
};
|
||||
|
||||
reg_dcdce: dcdce {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-name = "vcc-dram";
|
||||
};
|
||||
|
||||
sw {
|
||||
/* unused */
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_ph_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2otg {
|
||||
dr_mode = "otg";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy {
|
||||
usb0_id_det-gpios = <&pio 2 6 GPIO_ACTIVE_HIGH>; /* PC6 */
|
||||
usb0_vbus-supply = <®_vcc5v>;
|
||||
usb3_vbus-supply = <®_vcc5v>;
|
||||
status = "okay";
|
||||
};
|
||||
Reference in New Issue
Block a user