GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)

source/bootloader/u-boot-2020.01/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts

@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm016-dc2
+ *
+ * (C) Copyright 2015 - 2018, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+
+/ {
+	model = "ZynqMP zc1751-xm016-dc2 RevA";
+	compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+	aliases {
+		can0 = &can0;
+		can1 = &can1;
+		ethernet0 = &gem2;
+		gpio0 = &gpio;
+		i2c0 = &i2c0;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		usb0 = &usb1;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem2 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	phy0: ethernet-phy@5 {
+		reg = <5>;
+		ti,rx-internal-delay = <0x8>;
+		ti,tx-internal-delay = <0xa>;
+		ti,fifo-depth = <0x1>;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+};
+
+&gpio {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tca6416_u26: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		/* IRQ not connected */
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&nand0 {
+	status = "okay";
+	arasan,has-mdma;
+
+	nand@0 {
+		reg = <0x0>;
+		#address-cells = <0x2>;
+		#size-cells = <0x1>;
+
+		partition@0 {	/* for testing purpose */
+			label = "nand-fsbl-uboot";
+			reg = <0x0 0x0 0x400000>;
+		};
+		partition@1 {	/* for testing purpose */
+			label = "nand-linux";
+			reg = <0x0 0x400000 0x1400000>;
+		};
+		partition@2 {	/* for testing purpose */
+			label = "nand-device-tree";
+			reg = <0x0 0x1800000 0x400000>;
+		};
+		partition@3 {	/* for testing purpose */
+			label = "nand-rootfs";
+			reg = <0x0 0x1c00000 0x1400000>;
+		};
+		partition@4 {	/* for testing purpose */
+			label = "nand-bitstream";
+			reg = <0x0 0x3000000 0x400000>;
+		};
+		partition@5 {	/* for testing purpose */
+			label = "nand-misc";
+			reg = <0x0 0x3400000 0xfcc00000>;
+		};
+	};
+	nand@1 {
+		reg = <0x1>;
+		#address-cells = <0x2>;
+		#size-cells = <0x1>;
+
+		partition@0 {	/* for testing purpose */
+			label = "nand1-fsbl-uboot";
+			reg = <0x0 0x0 0x400000>;
+		};
+		partition@1 {	/* for testing purpose */
+			label = "nand1-linux";
+			reg = <0x0 0x400000 0x1400000>;
+		};
+		partition@2 {	/* for testing purpose */
+			label = "nand1-device-tree";
+			reg = <0x0 0x1800000 0x400000>;
+		};
+		partition@3 {	/* for testing purpose */
+			label = "nand1-rootfs";
+			reg = <0x0 0x1c00000 0x1400000>;
+		};
+		partition@4 {	/* for testing purpose */
+			label = "nand1-bitstream";
+			reg = <0x0 0x3000000 0x400000>;
+		};
+		partition@5 {	/* for testing purpose */
+			label = "nand1-misc";
+			reg = <0x0 0x3400000 0xfcc00000>;
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	num-cs = <1>;
+	spi0_flash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst,sst25wf080", "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+
+		partition@0 {
+			label = "data";
+			reg = <0x0 0x100000>;
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	num-cs = <1>;
+	spi1_flash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at45db041e", "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+
+		partition@0 {
+			label = "data";
+			reg = <0x0 0x84000>;
+		};
+	};
+};
+
+/* ULPI SMSC USB3320 */
+&usb1 {
+	status = "okay";
+};
+
+&dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};