GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)
This commit is contained in:
@@ -0,0 +1,311 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* dts file for Xilinx ZynqMP ZCU104
|
||||
*
|
||||
* (C) Copyright 2017 - 2018, Xilinx, Inc.
|
||||
*
|
||||
* Michal Simek <michal.simek@xilinx.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "zynqmp.dtsi"
|
||||
#include "zynqmp-clk-ccf.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/phy/phy.h>
|
||||
|
||||
/ {
|
||||
model = "ZynqMP ZCU104 RevC";
|
||||
compatible = "xlnx,zynqmp-zcu104-revC", "xlnx,zynqmp-zcu104", "xlnx,zynqmp";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gem3;
|
||||
gpio0 = &gpio;
|
||||
i2c0 = &i2c1;
|
||||
mmc0 = &sdhci1;
|
||||
rtc0 = &rtc;
|
||||
serial0 = &uart0;
|
||||
serial1 = &uart1;
|
||||
serial2 = &dcc;
|
||||
spi0 = &qspi;
|
||||
usb0 = &usb0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "earlycon";
|
||||
stdout-path = "serial0:115200n8";
|
||||
xlnx,eeprom = &eeprom;
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x80000000>;
|
||||
};
|
||||
|
||||
ina226 {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&u183 0>, <&u183 1>, <&u183 2>, <&u183 3>;
|
||||
};
|
||||
};
|
||||
|
||||
&can1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dcc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fpd_dma_chan1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fpd_dma_chan2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fpd_dma_chan3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fpd_dma_chan4 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fpd_dma_chan5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fpd_dma_chan6 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fpd_dma_chan7 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fpd_dma_chan8 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gem3 {
|
||||
status = "okay";
|
||||
phy-handle = <&phy0>;
|
||||
phy-mode = "rgmii-id";
|
||||
phy0: ethernet-phy@c {
|
||||
reg = <0xc>;
|
||||
ti,rx-internal-delay = <0x8>;
|
||||
ti,tx-internal-delay = <0xa>;
|
||||
ti,fifo-depth = <0x1>;
|
||||
ti,dp83867-rxctrl-strap-quirk;
|
||||
};
|
||||
};
|
||||
|
||||
&gpio {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
tca6416_u97: gpio@20 {
|
||||
compatible = "ti,tca6416";
|
||||
reg = <0x20>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
/*
|
||||
* IRQ not connected
|
||||
* Lines:
|
||||
* 0 - IRPS5401_ALERT_B
|
||||
* 1 - HDMI_8T49N241_INT_ALM
|
||||
* 2 - MAX6643_OT_B
|
||||
* 3 - MAX6643_FANFAIL_B
|
||||
* 5 - IIC_MUX_RESET_B
|
||||
* 6 - GEM3_EXP_RESET_B
|
||||
* 7 - FMC_LPC_PRSNT_M2C_B
|
||||
* 4, 10 - 17 - not connected
|
||||
*/
|
||||
};
|
||||
|
||||
/* Another connection to this bus via PL i2c via PCA9306 - u45 */
|
||||
i2c-mux@74 { /* u34 */
|
||||
compatible = "nxp,pca9548";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x74>;
|
||||
i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
/*
|
||||
* IIC_EEPROM 1kB memory which uses 256B blocks
|
||||
* where every block has different address.
|
||||
* 0 - 256B address 0x54
|
||||
* 256B - 512B address 0x55
|
||||
* 512B - 768B address 0x56
|
||||
* 768B - 1024B address 0x57
|
||||
*/
|
||||
eeprom: eeprom@54 { /* u23 */
|
||||
compatible = "atmel,24c08";
|
||||
reg = <0x54>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
clock_8t49n287: clock-generator@6c { /* 8T49N287 - u182 */
|
||||
compatible = "idt,8t49n287";
|
||||
reg = <0x6c>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
irps5401_43: irps54012@43 { /* IRPS5401 - u175 */
|
||||
#clock-cells = <0>;
|
||||
compatible = "infineon,irps5401";
|
||||
reg = <0x43>;
|
||||
};
|
||||
irps5401_4d: irps54012@4d { /* IRPS5401 - u180 */
|
||||
#clock-cells = <0>;
|
||||
compatible = "infineon,irps5401";
|
||||
reg = <0x4d>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
u183: ina226@40 { /* u183 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
reg = <0x40>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@5 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <5>;
|
||||
};
|
||||
|
||||
i2c@7 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <7>;
|
||||
};
|
||||
|
||||
/* 4, 6 not connected */
|
||||
};
|
||||
};
|
||||
|
||||
&qspi {
|
||||
status = "okay";
|
||||
flash@0 {
|
||||
compatible = "m25p80", "jedec,spi-nor"; /* n25q512a 128MiB */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x0>;
|
||||
spi-tx-bus-width = <1>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-max-frequency = <108000000>; /* Based on DC1 spec */
|
||||
partition@qspi-fsbl-uboot { /* for testing purpose */
|
||||
label = "qspi-fsbl-uboot";
|
||||
reg = <0x0 0x100000>;
|
||||
};
|
||||
partition@qspi-linux { /* for testing purpose */
|
||||
label = "qspi-linux";
|
||||
reg = <0x100000 0x500000>;
|
||||
};
|
||||
partition@qspi-device-tree { /* for testing purpose */
|
||||
label = "qspi-device-tree";
|
||||
reg = <0x600000 0x20000>;
|
||||
};
|
||||
partition@qspi-rootfs { /* for testing purpose */
|
||||
label = "qspi-rootfs";
|
||||
reg = <0x620000 0x5E0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rtc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "okay";
|
||||
/* SATA OOB timing settings */
|
||||
ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
|
||||
ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
|
||||
ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
|
||||
ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
|
||||
ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
|
||||
ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
|
||||
ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
|
||||
ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
|
||||
phy-names = "sata-phy";
|
||||
phys = <&lane3 PHY_TYPE_SATA 1 1 125000000>;
|
||||
};
|
||||
|
||||
/* SD1 with level shifter */
|
||||
&sdhci1 {
|
||||
status = "okay";
|
||||
no-1-8-v;
|
||||
xlnx,mio_bank = <1>;
|
||||
disable-wp;
|
||||
};
|
||||
|
||||
&serdes {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* ULPI SMSC USB3320 */
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dwc3_0 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
snps,usb3_lpm_capable;
|
||||
phy-names = "usb3-phy";
|
||||
phys = <&lane2 PHY_TYPE_USB3 0 2 26000000>;
|
||||
maximum-speed = "super-speed";
|
||||
};
|
||||
|
||||
&watchdog0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&xilinx_ams {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ams_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ams_pl {
|
||||
status = "okay";
|
||||
};
|
||||
Reference in New Issue
Block a user