GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)

source/bootloader/u-boot-2020.01/arch/arm/mach-rockchip/rk3036/rk3036.c

@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+#include <asm/io.h>
+#include <asm/arch-rockchip/grf_rk3036.h>
+#include <asm/arch-rockchip/hardware.h>
+#include <asm/arch-rockchip/sdram_rk3036.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
+void board_debug_uart_init(void)
+{
+#define GRF_BASE	0x20008000
+	struct rk3036_grf * const grf = (void *)GRF_BASE;
+	enum {
+		GPIO1C3_SHIFT		= 6,
+		GPIO1C3_MASK		= 3 << GPIO1C3_SHIFT,
+		GPIO1C3_GPIO		= 0,
+		GPIO1C3_MMC0_D1,
+		GPIO1C3_UART2_SOUT,
+
+		GPIO1C2_SHIFT		= 4,
+		GPIO1C2_MASK		= 3 << GPIO1C2_SHIFT,
+		GPIO1C2_GPIO		= 0,
+		GPIO1C2_MMC0_D0,
+		GPIO1C2_UART2_SIN,
+	};
+	/*
+	 * NOTE: sd card and debug uart use same iomux in rk3036,
+	 * so if you enable uart,
+	 * you can not boot from sdcard
+	 */
+	rk_clrsetreg(&grf->gpio1c_iomux,
+		     GPIO1C3_MASK << GPIO1C3_SHIFT |
+		     GPIO1C2_MASK << GPIO1C2_SHIFT,
+		     GPIO1C3_UART2_SOUT << GPIO1C3_SHIFT |
+		     GPIO1C2_UART2_SIN << GPIO1C2_SHIFT);
+}
+#endif
+
+#if !CONFIG_IS_ENABLED(RAM)
+/*
+ * When CONFIG_RAM is enabled, the dram_init() function is implemented
+ * in sdram.c.
+ */
+int dram_init(void)
+{
+	gd->ram_size = sdram_size();
+
+	return 0;
+}
+#endif