GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)

source/bootloader/u-boot-2020.01/arch/arm/mach-rockchip/rk3308/Kconfig

@@ -0,0 +1,27 @@
+if ROCKCHIP_RK3308
+
+config TARGET_EVB_RK3308
+	bool "EVB_RK3308"
+	select BOARD_LATE_INIT
+
+config TARGET_ROC_RK3308_CC
+       bool "Firefly roc-rk3308-cc"
+	select BOARD_LATE_INIT
+
+config SYS_SOC
+	default "rk3308"
+
+config SYS_MALLOC_F_LEN
+	default 0x400
+
+config SPL_SERIAL_SUPPORT
+	default y
+
+config ROCKCHIP_BOOT_MODE_REG
+	default 0xff000500
+
+
+source "board/rockchip/evb_rk3308/Kconfig"
+source "board/firefly/firefly-rk3308/Kconfig"
+
+endif

source/bootloader/u-boot-2020.01/arch/arm/mach-rockchip/rk3308/Makefile

@@ -0,0 +1,9 @@
+#
+# (C) Copyright 2018 Rockchip Electronics Co., Ltd.
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+obj-y += syscon_rk3308.o
+obj-y += rk3308.o
+obj-y += clk_rk3308.o

source/bootloader/u-boot-2020.01/arch/arm/mach-rockchip/rk3308/clk_rk3308.c

@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <syscon.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch/cru_rk3308.h>
+
+int rockchip_get_clk(struct udevice **devp)
+{
+	return uclass_get_device_by_driver(UCLASS_CLK,
+			DM_GET_DRIVER(rockchip_rk3308_cru), devp);
+}
+
+void *rockchip_get_cru(void)
+{
+	struct rk3308_clk_priv *priv;
+	struct udevice *dev;
+	int ret;
+
+	ret = rockchip_get_clk(&dev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	priv = dev_get_priv(dev);
+
+	return priv->cru;
+}

source/bootloader/u-boot-2020.01/arch/arm/mach-rockchip/rk3308/rk3308.c

@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *Copyright (c) 2018 Rockchip Electronics Co., Ltd
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/grf_rk3308.h>
+#include <asm/arch-rockchip/hardware.h>
+#include <asm/gpio.h>
+#include <debug_uart.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#include <asm/armv8/mmu.h>
+static struct mm_region rk3308_mem_map[] = {
+	{
+		.virt = 0x0UL,
+		.phys = 0x0UL,
+		.size = 0xff000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0xff000000UL,
+		.phys = 0xff000000UL,
+		.size = 0x01000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = rk3308_mem_map;
+
+#define GRF_BASE	0xff000000
+#define SGRF_BASE	0xff2b0000
+
+enum {
+	GPIO1C7_SHIFT		= 8,
+	GPIO1C7_MASK		= GENMASK(11, 8),
+	GPIO1C7_GPIO		= 0,
+	GPIO1C7_UART1_RTSN,
+	GPIO1C7_UART2_TX_M0,
+	GPIO1C7_SPI2_MOSI,
+	GPIO1C7_JTAG_TMS,
+
+	GPIO1C6_SHIFT		= 4,
+	GPIO1C6_MASK		= GENMASK(7, 4),
+	GPIO1C6_GPIO		= 0,
+	GPIO1C6_UART1_CTSN,
+	GPIO1C6_UART2_RX_M0,
+	GPIO1C6_SPI2_MISO,
+	GPIO1C6_JTAG_TCLK,
+
+	GPIO4D3_SHIFT           = 6,
+	GPIO4D3_MASK            = GENMASK(7, 6),
+	GPIO4D3_GPIO            = 0,
+	GPIO4D3_SDMMC_D3,
+	GPIO4D3_UART2_TX_M1,
+
+	GPIO4D2_SHIFT           = 4,
+	GPIO4D2_MASK            = GENMASK(5, 4),
+	GPIO4D2_GPIO            = 0,
+	GPIO4D2_SDMMC_D2,
+	GPIO4D2_UART2_RX_M1,
+
+	UART2_IO_SEL_SHIFT	= 2,
+	UART2_IO_SEL_MASK	= GENMASK(3, 2),
+	UART2_IO_SEL_M0		= 0,
+	UART2_IO_SEL_M1,
+	UART2_IO_SEL_USB,
+
+	GPIO2C0_SEL_SRC_CTRL_SHIFT	= 11,
+	GPIO2C0_SEL_SRC_CTRL_MASK	= BIT(11),
+	GPIO2C0_SEL_SRC_CTRL_IOMUX	= 0,
+	GPIO2C0_SEL_SRC_CTRL_SEL_PLUS,
+
+	GPIO3B3_SEL_SRC_CTRL_SHIFT	= 7,
+	GPIO3B3_SEL_SRC_CTRL_MASK	= BIT(7),
+	GPIO3B3_SEL_SRC_CTRL_IOMUX	= 0,
+	GPIO3B3_SEL_SRC_CTRL_SEL_PLUS,
+
+	GPIO3B3_SEL_PLUS_SHIFT		= 4,
+	GPIO3B3_SEL_PLUS_MASK		= GENMASK(6, 4),
+	GPIO3B3_SEL_PLUS_GPIO3_B3	= 0,
+	GPIO3B3_SEL_PLUS_FLASH_ALE,
+	GPIO3B3_SEL_PLUS_EMMC_PWREN,
+	GPIO3B3_SEL_PLUS_SPI1_CLK,
+	GPIO3B3_SEL_PLUS_LCDC_D23_M1,
+
+	GPIO3B2_SEL_SRC_CTRL_SHIFT	= 3,
+	GPIO3B2_SEL_SRC_CTRL_MASK	= BIT(3),
+	GPIO3B2_SEL_SRC_CTRL_IOMUX	= 0,
+	GPIO3B2_SEL_SRC_CTRL_SEL_PLUS,
+
+	GPIO3B2_SEL_PLUS_SHIFT		= 0,
+	GPIO3B2_SEL_PLUS_MASK		= GENMASK(2, 0),
+	GPIO3B2_SEL_PLUS_GPIO3_B2	= 0,
+	GPIO3B2_SEL_PLUS_FLASH_RDN,
+	GPIO3B2_SEL_PLUS_EMMC_RSTN,
+	GPIO3B2_SEL_PLUS_SPI1_MISO,
+	GPIO3B2_SEL_PLUS_LCDC_D22_M1,
+
+	I2C3_IOFUNC_SRC_CTRL_SHIFT	= 10,
+	I2C3_IOFUNC_SRC_CTRL_MASK	= BIT(10),
+	I2C3_IOFUNC_SRC_CTRL_SEL_PLUS	= 1,
+
+	GPIO2A3_SEL_SRC_CTRL_SHIFT	= 7,
+	GPIO2A3_SEL_SRC_CTRL_MASK	= BIT(7),
+	GPIO2A3_SEL_SRC_CTRL_SEL_PLUS	= 1,
+
+	GPIO2A2_SEL_SRC_CTRL_SHIFT	= 3,
+	GPIO2A2_SEL_SRC_CTRL_MASK	= BIT(3),
+	GPIO2A2_SEL_SRC_CTRL_SEL_PLUS	= 1,
+};
+
+enum {
+	IOVSEL3_CTRL_SHIFT	= 8,
+	IOVSEL3_CTRL_MASK	= BIT(8),
+	VCCIO3_SEL_BY_GPIO	= 0,
+	VCCIO3_SEL_BY_IOVSEL3,
+
+	IOVSEL3_SHIFT		= 3,
+	IOVSEL3_MASK		= BIT(3),
+	VCCIO3_3V3		= 0,
+	VCCIO3_1V8,
+};
+
+/*
+ * The voltage of VCCIO3(which is the voltage domain of emmc/flash/sfc
+ * interface) can indicated by GPIO0_A4 or io_vsel3. The SOC defaults
+ * use GPIO0_A4 to indicate power supply voltage for VCCIO3 by hardware,
+ * then we can switch to io_vsel3 after system power on, and release GPIO0_A4
+ * for other usage.
+ */
+
+#define GPIO0_A4	4
+
+int rk_board_init(void)
+{
+	static struct rk3308_grf * const grf = (void *)GRF_BASE;
+	u32 val;
+	int ret;
+
+	ret = gpio_request(GPIO0_A4, "gpio0_a4");
+	if (ret < 0) {
+		printf("request for gpio0_a4 failed:%d\n", ret);
+		return 0;
+	}
+
+	gpio_direction_input(GPIO0_A4);
+
+	if (gpio_get_value(GPIO0_A4))
+		val = VCCIO3_SEL_BY_IOVSEL3 << IOVSEL3_CTRL_SHIFT |
+		      VCCIO3_1V8 << IOVSEL3_SHIFT;
+	else
+		val = VCCIO3_SEL_BY_IOVSEL3 << IOVSEL3_CTRL_SHIFT |
+		      VCCIO3_3V3 << IOVSEL3_SHIFT;
+	rk_clrsetreg(&grf->soc_con0, IOVSEL3_CTRL_MASK | IOVSEL3_MASK, val);
+
+	gpio_free(GPIO0_A4);
+	return 0;
+}
+
+#if defined(CONFIG_DEBUG_UART)
+__weak void board_debug_uart_init(void)
+{
+	static struct rk3308_grf * const grf = (void *)GRF_BASE;
+
+	/* Enable early UART2 channel m1 on the rk3308 */
+	rk_clrsetreg(&grf->soc_con5, UART2_IO_SEL_MASK,
+		     UART2_IO_SEL_M1 << UART2_IO_SEL_SHIFT);
+	rk_clrsetreg(&grf->gpio4d_iomux,
+		     GPIO4D3_MASK | GPIO4D2_MASK,
+		     GPIO4D2_UART2_RX_M1 << GPIO4D2_SHIFT |
+		     GPIO4D3_UART2_TX_M1 << GPIO4D3_SHIFT);
+}
+#endif
+
+#if defined(CONFIG_SPL_BUILD)
+int arch_cpu_init(void)
+{
+	static struct rk3308_sgrf * const sgrf = (void *)SGRF_BASE;
+	static struct rk3308_grf * const grf = (void *)GRF_BASE;
+
+	/* Set CRYPTO SDMMC EMMC NAND SFC USB master bus to be secure access */
+	rk_clrreg(&sgrf->con_secure0, 0x2b83);
+
+	/*
+	 * Enable plus options to use more pinctrl functions, including
+	 * GPIO2A2_PLUS, GPIO2A3_PLUS and I2C3_MULTI_SRC_PLUS.
+	 */
+	rk_clrsetreg(&grf->soc_con13,
+		     I2C3_IOFUNC_SRC_CTRL_MASK | GPIO2A3_SEL_SRC_CTRL_MASK |
+		     GPIO2A2_SEL_SRC_CTRL_MASK,
+		     I2C3_IOFUNC_SRC_CTRL_SEL_PLUS << I2C3_IOFUNC_SRC_CTRL_SHIFT |
+		     GPIO2A3_SEL_SRC_CTRL_SEL_PLUS << GPIO2A3_SEL_SRC_CTRL_SHIFT |
+		     GPIO2A2_SEL_SRC_CTRL_SEL_PLUS << GPIO2A2_SEL_SRC_CTRL_SHIFT);
+
+	/* Plus options about GPIO3B2_PLUS, GPIO3B3_PLUS and GPIO2C0_PLUS. */
+	rk_clrsetreg(&grf->soc_con15,
+		     GPIO2C0_SEL_SRC_CTRL_MASK | GPIO3B3_SEL_SRC_CTRL_MASK |
+		     GPIO3B2_SEL_SRC_CTRL_MASK,
+		     GPIO2C0_SEL_SRC_CTRL_SEL_PLUS << GPIO2C0_SEL_SRC_CTRL_SHIFT |
+		     GPIO3B3_SEL_SRC_CTRL_SEL_PLUS << GPIO3B3_SEL_SRC_CTRL_SHIFT |
+		     GPIO3B2_SEL_SRC_CTRL_SEL_PLUS << GPIO3B2_SEL_SRC_CTRL_SHIFT);
+
+	return 0;
+}
+#endif

source/bootloader/u-boot-2020.01/arch/arm/mach-rockchip/rk3308/syscon_rk3308.c

@@ -0,0 +1,20 @@
+// SPDX-License-Identifier:     GPL-2.0+
+/*
+ * (C) Copyright 2018 Rockchip Electronics Co., Ltd
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <syscon.h>
+#include <asm/arch-rockchip/clock.h>
+
+static const struct udevice_id rk3308_syscon_ids[] = {
+	{ .compatible = "rockchip,rk3308-grf", .data = ROCKCHIP_SYSCON_GRF },
+	{ }
+};
+
+U_BOOT_DRIVER(syscon_rk3308) = {
+	.name = "rk3308_syscon",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3308_syscon_ids,
+};