GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)

source/bootloader/u-boot-2020.01/arch/arm/mach-stm32mp/Kconfig

@@ -0,0 +1,151 @@
+if ARCH_STM32MP
+
+config SPL
+	select SPL_BOARD_INIT
+	select SPL_CLK
+	select SPL_DM
+	select SPL_DM_SEQ_ALIAS
+	select SPL_DRIVERS_MISC_SUPPORT
+	select SPL_FRAMEWORK
+	select SPL_GPIO_SUPPORT
+	select SPL_LIBCOMMON_SUPPORT
+	select SPL_LIBGENERIC_SUPPORT
+	select SPL_OF_CONTROL
+	select SPL_OF_TRANSLATE
+	select SPL_PINCTRL
+	select SPL_REGMAP
+	select SPL_DM_RESET
+	select SPL_SERIAL_SUPPORT
+	select SPL_SPI_LOAD
+	select SPL_SYSCON
+	select SPL_WATCHDOG_SUPPORT if WATCHDOG
+	imply BOOTSTAGE_STASH if SPL_BOOTSTAGE
+	imply SPL_BOOTSTAGE if BOOTSTAGE
+	imply SPL_DISPLAY_PRINT
+	imply SPL_LIBDISK_SUPPORT
+
+config SYS_SOC
+	default "stm32mp"
+
+config SYS_MALLOC_LEN
+	default 0x2000000
+
+config ENV_SIZE
+	default 0x2000
+
+config TARGET_STM32MP1
+	bool "Support stm32mp1xx"
+	select ARCH_SUPPORT_PSCI if !STM32MP1_TRUSTED
+	select CPU_V7A
+	select CPU_V7_HAS_NONSEC if !STM32MP1_TRUSTED
+	select CPU_V7_HAS_VIRT
+	select OF_BOARD_SETUP
+	select PINCTRL_STM32
+	select STM32_RCC
+	select STM32_RESET
+	select STM32_SERIAL
+	select SYS_ARCH_TIMER
+	imply BOOTCOUNT_LIMIT
+	imply CMD_BOOTCOUNT
+	imply CMD_CLS if CMD_BMP
+	imply DISABLE_CONSOLE
+	imply PRE_CONSOLE_BUFFER
+	imply SILENT_CONSOLE
+	imply SYSRESET_PSCI if STM32MP1_TRUSTED
+	imply SYSRESET_SYSCON if !STM32MP1_TRUSTED
+	help
+		target STMicroelectronics SOC STM32MP1 family
+		STM32MP157, STM32MP153 or STM32MP151
+		STMicroelectronics MPU with core ARMv7
+		dual core A7 for STM32MP157/3, monocore for STM32MP151
+
+config STM32MP1_TRUSTED
+	bool "Support trusted boot with TF-A"
+	default y if !SPL
+	select ARM_SMCCC
+	help
+		Say Y here to enable boot with TF-A
+		Trusted boot chain is :
+		BootRom => TF-A.stm32 (clock & DDR) => U-Boot.stm32
+		TF-A monitor provides proprietary SMC to manage secure devices
+
+config STM32MP1_OPTEE
+	bool "Support trusted boot with TF-A and OP-TEE"
+	depends on STM32MP1_TRUSTED
+	default n
+	help
+		Say Y here to enable boot with TF-A and OP-TEE
+		Trusted boot chain is :
+		BootRom => TF-A.stm32 (clock & DDR) => OP-TEE => U-Boot.stm32
+		OP-TEE monitor provides ST SMC to access to secure resources
+
+config SYS_TEXT_BASE
+	prompt "U-Boot base address"
+	default 0xC0100000
+	help
+		configure the U-Boot base address
+		when DDR driver is used:
+		  DDR + 1MB (0xC0100000)
+
+config NR_DRAM_BANKS
+	default 1
+
+config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2
+	hex "Partition on MMC2 to use to load U-Boot from"
+	depends on SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
+	default 1
+	help
+	  Partition on the second MMC to load U-Boot from when the MMC is being
+	  used in raw mode
+
+config STM32_ETZPC
+	bool "STM32 Extended TrustZone Protection"
+	depends on TARGET_STM32MP1
+	default y
+	help
+	  Say y to enable STM32 Extended TrustZone Protection
+
+config CMD_STM32KEY
+	bool "command stm32key to fuse public key hash"
+	default y
+	depends on CMD_FUSE
+	help
+		fuse public key hash in corresponding fuse used to authenticate
+		binary.
+
+
+config PRE_CON_BUF_ADDR
+	default 0xC02FF000
+
+config PRE_CON_BUF_SZ
+	default 4096
+
+config BOOTSTAGE_STASH_ADDR
+	default 0xC3000000
+
+if BOOTCOUNT_LIMIT
+config SYS_BOOTCOUNT_SINGLEWORD
+	default y
+
+# TAMP_BOOTCOUNT = TAMP_BACKUP_REGISTER(21)
+config SYS_BOOTCOUNT_ADDR
+	default 0x5C00A154
+endif
+
+if DEBUG_UART
+
+config DEBUG_UART_BOARD_INIT
+	default y
+
+# debug on UART4 by default
+config DEBUG_UART_BASE
+	default 0x40010000
+
+# clock source is HSI on reset
+config DEBUG_UART_CLOCK
+	default 64000000
+endif
+
+source "board/st/stm32mp1/Kconfig"
+
+endif