GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)
This commit is contained in:
@@ -0,0 +1,414 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0+ */
|
||||
/*
|
||||
* Startup Code for RISC-V Core
|
||||
*
|
||||
* Copyright (c) 2017 Microsemi Corporation.
|
||||
* Copyright (c) 2017 Padmarao Begari <Padmarao.Begari@microsemi.com>
|
||||
*
|
||||
* Copyright (C) 2017 Andes Technology Corporation
|
||||
* Rick Chen, Andes Technology Corporation <rick@andestech.com>
|
||||
*/
|
||||
|
||||
#include <asm-offsets.h>
|
||||
#include <config.h>
|
||||
#include <common.h>
|
||||
#include <elf.h>
|
||||
#include <asm/encoding.h>
|
||||
#include <generated/asm-offsets.h>
|
||||
|
||||
#ifdef CONFIG_32BIT
|
||||
#define LREG lw
|
||||
#define SREG sw
|
||||
#define REGBYTES 4
|
||||
#define RELOC_TYPE R_RISCV_32
|
||||
#define SYM_INDEX 0x8
|
||||
#define SYM_SIZE 0x10
|
||||
#else
|
||||
#define LREG ld
|
||||
#define SREG sd
|
||||
#define REGBYTES 8
|
||||
#define RELOC_TYPE R_RISCV_64
|
||||
#define SYM_INDEX 0x20
|
||||
#define SYM_SIZE 0x18
|
||||
#endif
|
||||
|
||||
.section .data
|
||||
secondary_harts_relocation_error:
|
||||
.ascii "Relocation of secondary harts has failed, error %d\n"
|
||||
|
||||
.section .text
|
||||
.globl _start
|
||||
_start:
|
||||
#if CONFIG_IS_ENABLED(RISCV_MMODE)
|
||||
csrr a0, CSR_MHARTID
|
||||
#endif
|
||||
|
||||
/* save hart id and dtb pointer */
|
||||
mv tp, a0
|
||||
mv s1, a1
|
||||
|
||||
la t0, trap_entry
|
||||
csrw MODE_PREFIX(tvec), t0
|
||||
|
||||
/* mask all interrupts */
|
||||
csrw MODE_PREFIX(ie), zero
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
/* check if hart is within range */
|
||||
/* tp: hart id */
|
||||
li t0, CONFIG_NR_CPUS
|
||||
bge tp, t0, hart_out_of_bounds_loop
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
/* set xSIE bit to receive IPIs */
|
||||
#if CONFIG_IS_ENABLED(RISCV_MMODE)
|
||||
li t0, MIE_MSIE
|
||||
#else
|
||||
li t0, SIE_SSIE
|
||||
#endif
|
||||
csrs MODE_PREFIX(ie), t0
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Set stackpointer in internal/ex RAM to call board_init_f
|
||||
*/
|
||||
call_board_init_f:
|
||||
li t0, -16
|
||||
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK)
|
||||
li t1, CONFIG_SPL_STACK
|
||||
#else
|
||||
li t1, CONFIG_SYS_INIT_SP_ADDR
|
||||
#endif
|
||||
and sp, t1, t0 /* force 16 byte alignment */
|
||||
|
||||
call_board_init_f_0:
|
||||
mv a0, sp
|
||||
jal board_init_f_alloc_reserve
|
||||
|
||||
/*
|
||||
* Set global data pointer here for all harts, uninitialized at this
|
||||
* point.
|
||||
*/
|
||||
mv gp, a0
|
||||
|
||||
/* setup stack */
|
||||
#ifdef CONFIG_SMP
|
||||
/* tp: hart id */
|
||||
slli t0, tp, CONFIG_STACK_SIZE_SHIFT
|
||||
sub sp, a0, t0
|
||||
#else
|
||||
mv sp, a0
|
||||
#endif
|
||||
|
||||
#ifndef CONFIG_XIP
|
||||
/*
|
||||
* Pick hart to initialize global data and run U-Boot. The other harts
|
||||
* wait for initialization to complete.
|
||||
*/
|
||||
la t0, hart_lottery
|
||||
li s2, 1
|
||||
amoswap.w s2, t1, 0(t0)
|
||||
bnez s2, wait_for_gd_init
|
||||
#else
|
||||
bnez tp, secondary_hart_loop
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_OF_PRIOR_STAGE
|
||||
la t0, prior_stage_fdt_address
|
||||
SREG s1, 0(t0)
|
||||
#endif
|
||||
|
||||
jal board_init_f_init_reserve
|
||||
|
||||
/* save the boot hart id to global_data */
|
||||
SREG tp, GD_BOOT_HART(gp)
|
||||
|
||||
#ifndef CONFIG_XIP
|
||||
la t0, available_harts_lock
|
||||
fence rw, w
|
||||
amoswap.w zero, zero, 0(t0)
|
||||
|
||||
wait_for_gd_init:
|
||||
la t0, available_harts_lock
|
||||
li t1, 1
|
||||
1: amoswap.w t1, t1, 0(t0)
|
||||
fence r, rw
|
||||
bnez t1, 1b
|
||||
|
||||
/* register available harts in the available_harts mask */
|
||||
li t1, 1
|
||||
sll t1, t1, tp
|
||||
LREG t2, GD_AVAILABLE_HARTS(gp)
|
||||
or t2, t2, t1
|
||||
SREG t2, GD_AVAILABLE_HARTS(gp)
|
||||
|
||||
fence rw, w
|
||||
amoswap.w zero, zero, 0(t0)
|
||||
|
||||
/*
|
||||
* Continue on hart lottery winner, others branch to
|
||||
* secondary_hart_loop.
|
||||
*/
|
||||
bnez s2, secondary_hart_loop
|
||||
#endif
|
||||
|
||||
/* Enable cache */
|
||||
jal icache_enable
|
||||
jal dcache_enable
|
||||
|
||||
#ifdef CONFIG_DEBUG_UART
|
||||
jal debug_uart_init
|
||||
#endif
|
||||
|
||||
mv a0, zero /* a0 <-- boot_flags = 0 */
|
||||
la t5, board_init_f
|
||||
jalr t5 /* jump to board_init_f() */
|
||||
|
||||
#ifdef CONFIG_SPL_BUILD
|
||||
spl_clear_bss:
|
||||
la t0, __bss_start
|
||||
la t1, __bss_end
|
||||
beq t0, t1, spl_stack_gd_setup
|
||||
|
||||
spl_clear_bss_loop:
|
||||
SREG zero, 0(t0)
|
||||
addi t0, t0, REGBYTES
|
||||
blt t0, t1, spl_clear_bss_loop
|
||||
|
||||
spl_stack_gd_setup:
|
||||
jal spl_relocate_stack_gd
|
||||
|
||||
/* skip setup if we did not relocate */
|
||||
beqz a0, spl_call_board_init_r
|
||||
mv s0, a0
|
||||
|
||||
/* setup stack on main hart */
|
||||
#ifdef CONFIG_SMP
|
||||
/* tp: hart id */
|
||||
slli t0, tp, CONFIG_STACK_SIZE_SHIFT
|
||||
sub sp, s0, t0
|
||||
#else
|
||||
mv sp, s0
|
||||
#endif
|
||||
|
||||
/* set new stack and global data pointer on secondary harts */
|
||||
spl_secondary_hart_stack_gd_setup:
|
||||
la a0, secondary_hart_relocate
|
||||
mv a1, s0
|
||||
mv a2, s0
|
||||
mv a3, zero
|
||||
jal smp_call_function
|
||||
|
||||
/* hang if relocation of secondary harts has failed */
|
||||
beqz a0, 1f
|
||||
mv a1, a0
|
||||
la a0, secondary_harts_relocation_error
|
||||
jal printf
|
||||
jal hang
|
||||
|
||||
/* set new global data pointer on main hart */
|
||||
1: mv gp, s0
|
||||
|
||||
spl_call_board_init_r:
|
||||
mv a0, zero
|
||||
mv a1, zero
|
||||
jal board_init_r
|
||||
#endif
|
||||
|
||||
/*
|
||||
* void relocate_code (addr_sp, gd, addr_moni)
|
||||
*
|
||||
* This "function" does not return, instead it continues in RAM
|
||||
* after relocating the monitor code.
|
||||
*
|
||||
*/
|
||||
.globl relocate_code
|
||||
relocate_code:
|
||||
mv s2, a0 /* save addr_sp */
|
||||
mv s3, a1 /* save addr of gd */
|
||||
mv s4, a2 /* save addr of destination */
|
||||
|
||||
/*
|
||||
*Set up the stack
|
||||
*/
|
||||
stack_setup:
|
||||
#ifdef CONFIG_SMP
|
||||
/* tp: hart id */
|
||||
slli t0, tp, CONFIG_STACK_SIZE_SHIFT
|
||||
sub sp, s2, t0
|
||||
#else
|
||||
mv sp, s2
|
||||
#endif
|
||||
|
||||
la t0, _start
|
||||
sub t6, s4, t0 /* t6 <- relocation offset */
|
||||
beq t0, s4, clear_bss /* skip relocation */
|
||||
|
||||
mv t1, s4 /* t1 <- scratch for copy_loop */
|
||||
la t3, __bss_start
|
||||
sub t3, t3, t0 /* t3 <- __bss_start_ofs */
|
||||
add t2, t0, t3 /* t2 <- source end address */
|
||||
|
||||
copy_loop:
|
||||
LREG t5, 0(t0)
|
||||
addi t0, t0, REGBYTES
|
||||
SREG t5, 0(t1)
|
||||
addi t1, t1, REGBYTES
|
||||
blt t0, t2, copy_loop
|
||||
|
||||
/*
|
||||
* Update dynamic relocations after board_init_f
|
||||
*/
|
||||
fix_rela_dyn:
|
||||
la t1, __rel_dyn_start
|
||||
la t2, __rel_dyn_end
|
||||
beq t1, t2, clear_bss
|
||||
add t1, t1, t6 /* t1 <- rela_dyn_start in RAM */
|
||||
add t2, t2, t6 /* t2 <- rela_dyn_end in RAM */
|
||||
|
||||
/*
|
||||
* skip first reserved entry: address, type, addend
|
||||
*/
|
||||
j 10f
|
||||
|
||||
6:
|
||||
LREG t5, -(REGBYTES*2)(t1) /* t5 <-- relocation info:type */
|
||||
li t3, R_RISCV_RELATIVE /* reloc type R_RISCV_RELATIVE */
|
||||
bne t5, t3, 8f /* skip non-RISCV_RELOC entries */
|
||||
LREG t3, -(REGBYTES*3)(t1)
|
||||
LREG t5, -(REGBYTES)(t1) /* t5 <-- addend */
|
||||
add t5, t5, t6 /* t5 <-- location to fix up in RAM */
|
||||
add t3, t3, t6 /* t3 <-- location to fix up in RAM */
|
||||
SREG t5, 0(t3)
|
||||
j 10f
|
||||
|
||||
8:
|
||||
la t4, __dyn_sym_start
|
||||
add t4, t4, t6
|
||||
|
||||
9:
|
||||
LREG t5, -(REGBYTES*2)(t1) /* t5 <-- relocation info:type */
|
||||
srli t0, t5, SYM_INDEX /* t0 <--- sym table index */
|
||||
andi t5, t5, 0xFF /* t5 <--- relocation type */
|
||||
li t3, RELOC_TYPE
|
||||
bne t5, t3, 10f /* skip non-addned entries */
|
||||
|
||||
LREG t3, -(REGBYTES*3)(t1)
|
||||
li t5, SYM_SIZE
|
||||
mul t0, t0, t5
|
||||
add s5, t4, t0
|
||||
LREG t0, -(REGBYTES)(t1) /* t0 <-- addend */
|
||||
LREG t5, REGBYTES(s5)
|
||||
add t5, t5, t0
|
||||
add t5, t5, t6 /* t5 <-- location to fix up in RAM */
|
||||
add t3, t3, t6 /* t3 <-- location to fix up in RAM */
|
||||
SREG t5, 0(t3)
|
||||
10:
|
||||
addi t1, t1, (REGBYTES*3)
|
||||
ble t1, t2, 6b
|
||||
|
||||
/*
|
||||
* trap update
|
||||
*/
|
||||
la t0, trap_entry
|
||||
add t0, t0, t6
|
||||
csrw MODE_PREFIX(tvec), t0
|
||||
|
||||
clear_bss:
|
||||
la t0, __bss_start /* t0 <- rel __bss_start in FLASH */
|
||||
add t0, t0, t6 /* t0 <- rel __bss_start in RAM */
|
||||
la t1, __bss_end /* t1 <- rel __bss_end in FLASH */
|
||||
add t1, t1, t6 /* t1 <- rel __bss_end in RAM */
|
||||
beq t0, t1, relocate_secondary_harts
|
||||
|
||||
clbss_l:
|
||||
SREG zero, 0(t0) /* clear loop... */
|
||||
addi t0, t0, REGBYTES
|
||||
blt t0, t1, clbss_l
|
||||
|
||||
relocate_secondary_harts:
|
||||
#ifdef CONFIG_SMP
|
||||
/* send relocation IPI */
|
||||
la t0, secondary_hart_relocate
|
||||
add a0, t0, t6
|
||||
|
||||
/* store relocation offset */
|
||||
mv s5, t6
|
||||
|
||||
mv a1, s2
|
||||
mv a2, s3
|
||||
mv a3, zero
|
||||
jal smp_call_function
|
||||
|
||||
/* hang if relocation of secondary harts has failed */
|
||||
beqz a0, 1f
|
||||
mv a1, a0
|
||||
la a0, secondary_harts_relocation_error
|
||||
jal printf
|
||||
jal hang
|
||||
|
||||
/* restore relocation offset */
|
||||
1: mv t6, s5
|
||||
#endif
|
||||
|
||||
/*
|
||||
* We are done. Do not return, instead branch to second part of board
|
||||
* initialization, now running from RAM.
|
||||
*/
|
||||
call_board_init_r:
|
||||
jal invalidate_icache_all
|
||||
jal flush_dcache_all
|
||||
la t0, board_init_r
|
||||
mv t4, t0 /* offset of board_init_r() */
|
||||
add t4, t4, t6 /* real address of board_init_r() */
|
||||
/*
|
||||
* setup parameters for board_init_r
|
||||
*/
|
||||
mv a0, s3 /* gd_t */
|
||||
mv a1, s4 /* dest_addr */
|
||||
|
||||
/*
|
||||
* jump to it ...
|
||||
*/
|
||||
jr t4 /* jump to board_init_r() */
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
hart_out_of_bounds_loop:
|
||||
/* Harts in this loop are out of bounds, increase CONFIG_NR_CPUS. */
|
||||
wfi
|
||||
j hart_out_of_bounds_loop
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
/* SMP relocation entry */
|
||||
secondary_hart_relocate:
|
||||
/* a1: new sp */
|
||||
/* a2: new gd */
|
||||
/* tp: hart id */
|
||||
|
||||
/* setup stack */
|
||||
slli t0, tp, CONFIG_STACK_SIZE_SHIFT
|
||||
sub sp, a1, t0
|
||||
|
||||
/* update global data pointer */
|
||||
mv gp, a2
|
||||
#endif
|
||||
|
||||
secondary_hart_loop:
|
||||
wfi
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
csrr t0, MODE_PREFIX(ip)
|
||||
#if CONFIG_IS_ENABLED(RISCV_MMODE)
|
||||
andi t0, t0, MIE_MSIE
|
||||
#else
|
||||
andi t0, t0, SIE_SSIE
|
||||
#endif
|
||||
beqz t0, secondary_hart_loop
|
||||
|
||||
mv a0, tp
|
||||
jal handle_ipi
|
||||
#endif
|
||||
|
||||
j secondary_hart_loop
|
||||
Reference in New Issue
Block a user