GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)

source/bootloader/u-boot-2020.01/arch/x86/cpu/baytrail/Kconfig

@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2015 Google, Inc
+
+config INTEL_BAYTRAIL
+	bool
+	select HAVE_FSP
+	select ARCH_MISC_INIT
+	select CPU_INTEL_TURBO_NOT_PACKAGE_SCOPED
+	imply HAVE_INTEL_ME
+	imply ENABLE_MRC_CACHE
+	imply AHCI_PCI
+	imply ICH_SPI
+	imply INTEL_ICH6_GPIO
+	imply PINCTRL_ICH6
+	imply MMC
+	imply MMC_PCI
+	imply MMC_SDHCI
+	imply MMC_SDHCI_SDMA
+	imply SCSI
+	imply SCSI_AHCI
+	imply SPI_FLASH
+	imply SYS_NS16550
+	imply USB
+	imply USB_EHCI_HCD
+	imply USB_XHCI_HCD
+	imply VIDEO_VESA
+
+if INTEL_BAYTRAIL
+config INTERNAL_UART
+	bool "Enable the SoC integrated legacy UART"
+	help
+	  There is a legacy UART integrated into the Bay Trail SoC.
+	  A maximum baud rate of 115200 bps is supported. For this
+	  reason, it is recommended that the UART port be used for
+	  debug purposes only, eg: U-Boot console.
+
+config DEBUG_UART
+	bool
+	select DEBUG_UART_BOARD_INIT
+
+endif

source/bootloader/u-boot-2020.01/arch/x86/cpu/baytrail/Makefile

@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2015 Google, Inc
+
+obj-y += cpu.o
+obj-y += early_uart.o
+obj-y += fsp_configs.o
+obj-y += valleyview.o
+obj-$(CONFIG_GENERATE_ACPI_TABLE) += acpi.o

source/bootloader/u-boot-2020.01/arch/x86/cpu/baytrail/acpi.c

@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com>
+ */
+
+#include <common.h>
+#include <acpi_s3.h>
+#include <cpu.h>
+#include <dm.h>
+#include <dm/uclass-internal.h>
+#include <asm/acpi_table.h>
+#include <asm/io.h>
+#include <asm/tables.h>
+#include <asm/arch/global_nvs.h>
+#include <asm/arch/iomap.h>
+
+void acpi_create_fadt(struct acpi_fadt *fadt, struct acpi_facs *facs,
+		      void *dsdt)
+{
+	struct acpi_table_header *header = &(fadt->header);
+	u16 pmbase = ACPI_BASE_ADDRESS;
+
+	memset((void *)fadt, 0, sizeof(struct acpi_fadt));
+
+	acpi_fill_header(header, "FACP");
+	header->length = sizeof(struct acpi_fadt);
+	header->revision = 4;
+
+	fadt->firmware_ctrl = (u32)facs;
+	fadt->dsdt = (u32)dsdt;
+	fadt->preferred_pm_profile = ACPI_PM_MOBILE;
+	fadt->sci_int = 9;
+	fadt->smi_cmd = 0;
+	fadt->acpi_enable = 0;
+	fadt->acpi_disable = 0;
+	fadt->s4bios_req = 0;
+	fadt->pstate_cnt = 0;
+	fadt->pm1a_evt_blk = pmbase;
+	fadt->pm1b_evt_blk = 0x0;
+	fadt->pm1a_cnt_blk = pmbase + 0x4;
+	fadt->pm1b_cnt_blk = 0x0;
+	fadt->pm2_cnt_blk = pmbase + 0x50;
+	fadt->pm_tmr_blk = pmbase + 0x8;
+	fadt->gpe0_blk = pmbase + 0x20;
+	fadt->gpe1_blk = 0;
+	fadt->pm1_evt_len = 4;
+	fadt->pm1_cnt_len = 2;
+	fadt->pm2_cnt_len = 1;
+	fadt->pm_tmr_len = 4;
+	fadt->gpe0_blk_len = 8;
+	fadt->gpe1_blk_len = 0;
+	fadt->gpe1_base = 0;
+	fadt->cst_cnt = 0;
+	fadt->p_lvl2_lat = ACPI_FADT_C2_NOT_SUPPORTED;
+	fadt->p_lvl3_lat = ACPI_FADT_C3_NOT_SUPPORTED;
+	fadt->flush_size = 0;
+	fadt->flush_stride = 0;
+	fadt->duty_offset = 1;
+	fadt->duty_width = 0;
+	fadt->day_alrm = 0x0d;
+	fadt->mon_alrm = 0x00;
+	fadt->century = 0x00;
+	fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042;
+	fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED |
+		ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON |
+		ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_RESET_REGISTER |
+		ACPI_FADT_PLATFORM_CLOCK;
+
+	fadt->reset_reg.space_id = ACPI_ADDRESS_SPACE_IO;
+	fadt->reset_reg.bit_width = 8;
+	fadt->reset_reg.bit_offset = 0;
+	fadt->reset_reg.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS;
+	fadt->reset_reg.addrl = IO_PORT_RESET;
+	fadt->reset_reg.addrh = 0;
+	fadt->reset_value = SYS_RST | RST_CPU | FULL_RST;
+
+	fadt->x_firmware_ctl_l = (u32)facs;
+	fadt->x_firmware_ctl_h = 0;
+	fadt->x_dsdt_l = (u32)dsdt;
+	fadt->x_dsdt_h = 0;
+
+	fadt->x_pm1a_evt_blk.space_id = ACPI_ADDRESS_SPACE_IO;
+	fadt->x_pm1a_evt_blk.bit_width = fadt->pm1_evt_len * 8;
+	fadt->x_pm1a_evt_blk.bit_offset = 0;
+	fadt->x_pm1a_evt_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS;
+	fadt->x_pm1a_evt_blk.addrl = fadt->pm1a_evt_blk;
+	fadt->x_pm1a_evt_blk.addrh = 0x0;
+
+	fadt->x_pm1b_evt_blk.space_id = ACPI_ADDRESS_SPACE_IO;
+	fadt->x_pm1b_evt_blk.bit_width = 0;
+	fadt->x_pm1b_evt_blk.bit_offset = 0;
+	fadt->x_pm1b_evt_blk.access_size = 0;
+	fadt->x_pm1b_evt_blk.addrl = 0x0;
+	fadt->x_pm1b_evt_blk.addrh = 0x0;
+
+	fadt->x_pm1a_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO;
+	fadt->x_pm1a_cnt_blk.bit_width = fadt->pm1_cnt_len * 8;
+	fadt->x_pm1a_cnt_blk.bit_offset = 0;
+	fadt->x_pm1a_cnt_blk.access_size = ACPI_ACCESS_SIZE_WORD_ACCESS;
+	fadt->x_pm1a_cnt_blk.addrl = fadt->pm1a_cnt_blk;
+	fadt->x_pm1a_cnt_blk.addrh = 0x0;
+
+	fadt->x_pm1b_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO;
+	fadt->x_pm1b_cnt_blk.bit_width = 0;
+	fadt->x_pm1b_cnt_blk.bit_offset = 0;
+	fadt->x_pm1b_cnt_blk.access_size = 0;
+	fadt->x_pm1b_cnt_blk.addrl = 0x0;
+	fadt->x_pm1b_cnt_blk.addrh = 0x0;
+
+	fadt->x_pm2_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO;
+	fadt->x_pm2_cnt_blk.bit_width = fadt->pm2_cnt_len * 8;
+	fadt->x_pm2_cnt_blk.bit_offset = 0;
+	fadt->x_pm2_cnt_blk.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS;
+	fadt->x_pm2_cnt_blk.addrl = fadt->pm2_cnt_blk;
+	fadt->x_pm2_cnt_blk.addrh = 0x0;
+
+	fadt->x_pm_tmr_blk.space_id = ACPI_ADDRESS_SPACE_IO;
+	fadt->x_pm_tmr_blk.bit_width = fadt->pm_tmr_len * 8;
+	fadt->x_pm_tmr_blk.bit_offset = 0;
+	fadt->x_pm_tmr_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS;
+	fadt->x_pm_tmr_blk.addrl = fadt->pm_tmr_blk;
+	fadt->x_pm_tmr_blk.addrh = 0x0;
+
+	fadt->x_gpe0_blk.space_id = ACPI_ADDRESS_SPACE_IO;
+	fadt->x_gpe0_blk.bit_width = fadt->gpe0_blk_len * 8;
+	fadt->x_gpe0_blk.bit_offset = 0;
+	fadt->x_gpe0_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS;
+	fadt->x_gpe0_blk.addrl = fadt->gpe0_blk;
+	fadt->x_gpe0_blk.addrh = 0x0;
+
+	fadt->x_gpe1_blk.space_id = ACPI_ADDRESS_SPACE_IO;
+	fadt->x_gpe1_blk.bit_width = 0;
+	fadt->x_gpe1_blk.bit_offset = 0;
+	fadt->x_gpe1_blk.access_size = 0;
+	fadt->x_gpe1_blk.addrl = 0x0;
+	fadt->x_gpe1_blk.addrh = 0x0;
+
+	header->checksum = table_compute_checksum(fadt, header->length);
+}
+
+void acpi_create_gnvs(struct acpi_global_nvs *gnvs)
+{
+	struct udevice *dev;
+	int ret;
+
+	/* at least we have one processor */
+	gnvs->pcnt = 1;
+	/* override the processor count with actual number */
+	ret = uclass_find_first_device(UCLASS_CPU, &dev);
+	if (ret == 0 && dev != NULL) {
+		ret = cpu_get_count(dev);
+		if (ret > 0)
+			gnvs->pcnt = ret;
+	}
+
+	/* determine whether internal uart is on */
+	if (IS_ENABLED(CONFIG_INTERNAL_UART))
+		gnvs->iuart_en = 1;
+	else
+		gnvs->iuart_en = 0;
+}
+
+#ifdef CONFIG_HAVE_ACPI_RESUME
+/*
+ * The following two routines are called at a very early stage, even before
+ * FSP 2nd phase API fsp_init() is called. Registers off ACPI_BASE_ADDRESS
+ * and PMC_BASE_ADDRESS are accessed, so we need make sure the base addresses
+ * of these two blocks are programmed by either U-Boot or FSP.
+ *
+ * It has been verified that 1st phase API (see arch/x86/lib/fsp1/fsp_car.S)
+ * on Intel BayTrail SoC already initializes these two base addresses so
+ * we are safe to access these registers here.
+ */
+
+enum acpi_sleep_state chipset_prev_sleep_state(void)
+{
+	u32 pm1_sts;
+	u32 pm1_cnt;
+	u32 gen_pmcon1;
+	enum acpi_sleep_state prev_sleep_state = ACPI_S0;
+
+	/* Read Power State */
+	pm1_sts = inw(ACPI_BASE_ADDRESS + PM1_STS);
+	pm1_cnt = inl(ACPI_BASE_ADDRESS + PM1_CNT);
+	gen_pmcon1 = readl(PMC_BASE_ADDRESS + GEN_PMCON1);
+
+	debug("PM1_STS = 0x%x PM1_CNT = 0x%x GEN_PMCON1 = 0x%x\n",
+	      pm1_sts, pm1_cnt, gen_pmcon1);
+
+	if (pm1_sts & WAK_STS)
+		prev_sleep_state = acpi_sleep_from_pm1(pm1_cnt);
+
+	if (gen_pmcon1 & (PWR_FLR | SUS_PWR_FLR))
+		prev_sleep_state = ACPI_S5;
+
+	return prev_sleep_state;
+}
+
+void chipset_clear_sleep_state(void)
+{
+	u32 pm1_cnt;
+
+	pm1_cnt = inl(ACPI_BASE_ADDRESS + PM1_CNT);
+	outl(pm1_cnt & ~(SLP_TYP), ACPI_BASE_ADDRESS + PM1_CNT);
+}
+#endif

source/bootloader/u-boot-2020.01/arch/x86/cpu/baytrail/cpu.c

@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Google, Inc
+ *
+ * Based on code from coreboot
+ */
+
+#include <common.h>
+#include <cpu.h>
+#include <dm.h>
+#include <pci.h>
+#include <asm/cpu.h>
+#include <asm/cpu_x86.h>
+#include <asm/io.h>
+#include <asm/lapic.h>
+#include <asm/msr.h>
+#include <asm/turbo.h>
+
+#define BYT_PRV_CLK			0x800
+#define BYT_PRV_CLK_EN			(1 << 0)
+#define BYT_PRV_CLK_M_VAL_SHIFT		1
+#define BYT_PRV_CLK_N_VAL_SHIFT		16
+#define BYT_PRV_CLK_UPDATE		(1 << 31)
+
+static void hsuart_clock_set(void *base)
+{
+	u32 m, n, reg;
+
+	/*
+	 * Configure the BayTrail UART clock for the internal HS UARTs
+	 * (PCI devices) to 58982400 Hz
+	 */
+	m = 0x2400;
+	n = 0x3d09;
+	reg = (m << BYT_PRV_CLK_M_VAL_SHIFT) | (n << BYT_PRV_CLK_N_VAL_SHIFT);
+	writel(reg, base + BYT_PRV_CLK);
+	reg |= BYT_PRV_CLK_EN | BYT_PRV_CLK_UPDATE;
+	writel(reg, base + BYT_PRV_CLK);
+}
+
+/*
+ * Configure the internal clock of both SIO HS-UARTs, if they are enabled
+ * via FSP
+ */
+int arch_cpu_init_dm(void)
+{
+	struct udevice *dev;
+	void *base;
+	int ret;
+	int i;
+
+	/* Loop over the 2 HS-UARTs */
+	for (i = 0; i < 2; i++) {
+		ret = dm_pci_bus_find_bdf(PCI_BDF(0, 0x1e, 3 + i), &dev);
+		if (!ret) {
+			base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_0,
+					      PCI_REGION_MEM);
+			hsuart_clock_set(base);
+		}
+	}
+
+	return 0;
+}
+
+static void set_max_freq(void)
+{
+	msr_t perf_ctl;
+	msr_t msr;
+
+	/* Enable speed step */
+	msr = msr_read(MSR_IA32_MISC_ENABLE);
+	msr.lo |= MISC_ENABLE_ENHANCED_SPEEDSTEP;
+	msr_write(MSR_IA32_MISC_ENABLE, msr);
+
+	/*
+	 * Set guaranteed ratio [21:16] from IACORE_RATIOS to bits [15:8] of
+	 * the PERF_CTL
+	 */
+	msr = msr_read(MSR_IACORE_RATIOS);
+	perf_ctl.lo = (msr.lo & 0x3f0000) >> 8;
+
+	/*
+	 * Set guaranteed vid [22:16] from IACORE_VIDS to bits [7:0] of
+	 * the PERF_CTL
+	 */
+	msr = msr_read(MSR_IACORE_VIDS);
+	perf_ctl.lo |= (msr.lo & 0x7f0000) >> 16;
+	perf_ctl.hi = 0;
+
+	msr_write(MSR_IA32_PERF_CTL, perf_ctl);
+}
+
+static int cpu_x86_baytrail_probe(struct udevice *dev)
+{
+	if (!ll_boot_init())
+		return 0;
+	debug("Init BayTrail core\n");
+
+	/*
+	 * On BayTrail the turbo disable bit is actually scoped at the
+	 * building-block level, not package. For non-BSP cores that are
+	 * within a building block, enable turbo. The cores within the BSP's
+	 * building block will just see it already enabled and move on.
+	 */
+	if (lapicid())
+		turbo_enable();
+
+	/* Dynamic L2 shrink enable and threshold */
+	msr_clrsetbits_64(MSR_PMG_CST_CONFIG_CONTROL, 0x3f000f, 0xe0008),
+
+	/* Disable C1E */
+	msr_clrsetbits_64(MSR_POWER_CTL, 2, 0);
+	msr_setbits_64(MSR_POWER_MISC, 0x44);
+
+	/* Set this core to max frequency ratio */
+	set_max_freq();
+
+	return 0;
+}
+
+static unsigned bus_freq(void)
+{
+	msr_t clk_info = msr_read(MSR_BSEL_CR_OVERCLOCK_CONTROL);
+	switch (clk_info.lo & 0x3) {
+	case 0:
+		return 83333333;
+	case 1:
+		return 100000000;
+	case 2:
+		return 133333333;
+	case 3:
+		return 116666666;
+	default:
+		return 0;
+	}
+}
+
+static unsigned long tsc_freq(void)
+{
+	msr_t platform_info;
+	ulong bclk = bus_freq();
+
+	if (!bclk)
+		return 0;
+
+	platform_info = msr_read(MSR_PLATFORM_INFO);
+
+	return bclk * ((platform_info.lo >> 8) & 0xff);
+}
+
+static int baytrail_get_info(struct udevice *dev, struct cpu_info *info)
+{
+	info->cpu_freq = tsc_freq();
+	info->features = 1 << CPU_FEAT_L1_CACHE | 1 << CPU_FEAT_MMU;
+
+	return 0;
+}
+
+static int baytrail_get_count(struct udevice *dev)
+{
+	int ecx = 0;
+
+	/*
+	 * Use the algorithm described in Intel 64 and IA-32 Architectures
+	 * Software Developer's Manual Volume 3 (3A, 3B & 3C): System
+	 * Programming Guide, Jan-2015. Section 8.9.2: Hierarchical Mapping
+	 * of CPUID Extended Topology Leaf.
+	 */
+	while (1) {
+		struct cpuid_result leaf_b;
+
+		leaf_b = cpuid_ext(0xb, ecx);
+
+		/*
+		 * Bay Trail doesn't have hyperthreading so just determine the
+		 * number of cores by from level type (ecx[15:8] == * 2)
+		 */
+		if ((leaf_b.ecx & 0xff00) == 0x0200)
+			return leaf_b.ebx & 0xffff;
+
+		ecx++;
+	}
+
+	return 0;
+}
+
+static const struct cpu_ops cpu_x86_baytrail_ops = {
+	.get_desc	= cpu_x86_get_desc,
+	.get_info	= baytrail_get_info,
+	.get_count	= baytrail_get_count,
+	.get_vendor	= cpu_x86_get_vendor,
+};
+
+static const struct udevice_id cpu_x86_baytrail_ids[] = {
+	{ .compatible = "intel,baytrail-cpu" },
+	{ }
+};
+
+U_BOOT_DRIVER(cpu_x86_baytrail_drv) = {
+	.name		= "cpu_x86_baytrail",
+	.id		= UCLASS_CPU,
+	.of_match	= cpu_x86_baytrail_ids,
+	.bind		= cpu_x86_bind,
+	.probe		= cpu_x86_baytrail_probe,
+	.ops		= &cpu_x86_baytrail_ops,
+	.flags		= DM_FLAG_PRE_RELOC,
+};

source/bootloader/u-boot-2020.01/arch/x86/cpu/baytrail/early_uart.c

@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Google, Inc
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+
+#define PCI_DEV_CONFIG(segbus, dev, fn) ( \
+		(((segbus) & 0xfff) << 20) | \
+		(((dev) & 0x1f) << 15) | \
+		(((fn)  & 0x07) << 12))
+
+/* Platform Controller Unit */
+#define LPC_DEV			0x1f
+#define LPC_FUNC		0
+
+/* Enable UART */
+#define UART_CONT		0x80
+
+/* SCORE Pad definitions */
+#define UART_RXD_PAD			82
+#define UART_TXD_PAD			83
+
+/* Pad base: PAD_CONF0[n]= PAD_BASE + 16 * n */
+#define GPSCORE_PAD_BASE	(IO_BASE_ADDRESS + IO_BASE_OFFSET_GPSCORE)
+
+/* IO Memory */
+#define IO_BASE_ADDRESS			0xfed0c000
+#define  IO_BASE_OFFSET_GPSCORE		0x0000
+#define  IO_BASE_OFFSET_GPNCORE		0x1000
+#define  IO_BASE_OFFSET_GPSSUS		0x2000
+#define IO_BASE_SIZE			0x4000
+
+static inline unsigned int score_pconf0(int pad_num)
+{
+	return GPSCORE_PAD_BASE + pad_num * 16;
+}
+
+static void score_select_func(int pad, int func)
+{
+	uint32_t reg;
+	uint32_t pconf0_addr = score_pconf0(pad);
+
+	reg = readl(pconf0_addr);
+	reg &= ~0x7;
+	reg |= func & 0x7;
+	writel(reg, pconf0_addr);
+}
+
+static void x86_pci_write_config32(int dev, unsigned int where, u32 value)
+{
+	unsigned long addr;
+
+	addr = CONFIG_PCIE_ECAM_BASE | dev | (where & ~3);
+	writel(value, addr);
+}
+
+/* This can be called after memory-mapped PCI is working */
+int setup_internal_uart(int enable)
+{
+	/* Enable or disable the legacy UART hardware */
+	x86_pci_write_config32(PCI_DEV_CONFIG(0, LPC_DEV, LPC_FUNC), UART_CONT,
+			       enable);
+
+	/* All done for the disable part, so just return */
+	if (!enable)
+		return 0;
+
+	/*
+	 * Set up the pads to the UART function. This allows the signals to
+	 * leave the chip
+	 */
+	score_select_func(UART_RXD_PAD, 1);
+	score_select_func(UART_TXD_PAD, 1);
+
+	/* TODO(sjg@chromium.org): Call debug_uart_init() */
+
+	return 0;
+}
+
+void board_debug_uart_init(void)
+{
+	setup_internal_uart(1);
+}

source/bootloader/u-boot-2020.01/arch/x86/cpu/baytrail/fsp_configs.c

@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: Intel
+/*
+ * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ * Copyright (C) 2015, Kodak Alaris, Inc
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <asm/fsp1/fsp_support.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/**
+ * Override the FSP's Azalia configuration data
+ *
+ * @azalia:	pointer to be updated to point to a ROM address where Azalia
+ *		configuration data is stored
+ */
+__weak void update_fsp_azalia_configs(struct azalia_config **azalia)
+{
+	*azalia = NULL;
+}
+
+/**
+ * Override the FSP's configuration data.
+ * If the device tree does not specify an integer setting, use the default
+ * provided in Intel's Baytrail_FSP_Gold4.tgz release FSP/BayleyBayFsp.bsf file.
+ */
+void fsp_update_configs(struct fsp_config_data *config,
+			struct fspinit_rtbuf *rt_buf)
+{
+	struct upd_region *fsp_upd = &config->fsp_upd;
+	struct memory_down_data *mem;
+	const void *blob = gd->fdt_blob;
+	int node;
+
+	/* Initialize runtime buffer for fsp_init() */
+	rt_buf->common.stack_top = config->common.stack_top - 32;
+	rt_buf->common.boot_mode = config->common.boot_mode;
+	rt_buf->common.upd_data = &config->fsp_upd;
+
+	node = fdtdec_next_compatible(blob, 0, COMPAT_INTEL_BAYTRAIL_FSP);
+	if (node < 0) {
+		debug("%s: Cannot find FSP node\n", __func__);
+		return;
+	}
+
+	fsp_upd->mrc_init_tseg_size = fdtdec_get_int(blob, node,
+						     "fsp,mrc-init-tseg-size",
+						     MRC_INIT_TSEG_SIZE_1MB);
+	fsp_upd->mrc_init_mmio_size = fdtdec_get_int(blob, node,
+						     "fsp,mrc-init-mmio-size",
+						     MRC_INIT_MMIO_SIZE_2048MB);
+	fsp_upd->mrc_init_spd_addr1 = fdtdec_get_int(blob, node,
+						     "fsp,mrc-init-spd-addr1",
+						     0xa0);
+	fsp_upd->mrc_init_spd_addr2 = fdtdec_get_int(blob, node,
+						     "fsp,mrc-init-spd-addr2",
+						     0xa2);
+	fsp_upd->emmc_boot_mode = fdtdec_get_int(blob, node,
+						 "fsp,emmc-boot-mode",
+						 EMMC_BOOT_MODE_EMMC41);
+	fsp_upd->enable_sdio = fdtdec_get_bool(blob, node, "fsp,enable-sdio");
+	fsp_upd->enable_sdcard = fdtdec_get_bool(blob, node,
+						 "fsp,enable-sdcard");
+	fsp_upd->enable_hsuart0 = fdtdec_get_bool(blob, node,
+						  "fsp,enable-hsuart0");
+	fsp_upd->enable_hsuart1 = fdtdec_get_bool(blob, node,
+						  "fsp,enable-hsuart1");
+	fsp_upd->enable_spi = fdtdec_get_bool(blob, node, "fsp,enable-spi");
+	fsp_upd->enable_sata = fdtdec_get_bool(blob, node, "fsp,enable-sata");
+	fsp_upd->sata_mode = fdtdec_get_int(blob, node, "fsp,sata-mode",
+					    SATA_MODE_AHCI);
+	fsp_upd->enable_azalia = fdtdec_get_bool(blob, node,
+						 "fsp,enable-azalia");
+	if (fsp_upd->enable_azalia)
+		update_fsp_azalia_configs(&fsp_upd->azalia_cfg_ptr);
+	fsp_upd->enable_xhci = fdtdec_get_bool(blob, node, "fsp,enable-xhci");
+	fsp_upd->lpe_mode = fdtdec_get_int(blob, node, "fsp,lpe-mode",
+					   LPE_MODE_PCI);
+	fsp_upd->lpss_sio_mode = fdtdec_get_int(blob, node, "fsp,lpss-sio-mode",
+					   LPSS_SIO_MODE_PCI);
+	fsp_upd->enable_dma0 = fdtdec_get_bool(blob, node, "fsp,enable-dma0");
+	fsp_upd->enable_dma1 = fdtdec_get_bool(blob, node, "fsp,enable-dma1");
+	fsp_upd->enable_i2_c0 = fdtdec_get_bool(blob, node, "fsp,enable-i2c0");
+	fsp_upd->enable_i2_c1 = fdtdec_get_bool(blob, node, "fsp,enable-i2c1");
+	fsp_upd->enable_i2_c2 = fdtdec_get_bool(blob, node, "fsp,enable-i2c2");
+	fsp_upd->enable_i2_c3 = fdtdec_get_bool(blob, node, "fsp,enable-i2c3");
+	fsp_upd->enable_i2_c4 = fdtdec_get_bool(blob, node, "fsp,enable-i2c4");
+	fsp_upd->enable_i2_c5 = fdtdec_get_bool(blob, node, "fsp,enable-i2c5");
+	fsp_upd->enable_i2_c6 = fdtdec_get_bool(blob, node, "fsp,enable-i2c6");
+	fsp_upd->enable_pwm0 = fdtdec_get_bool(blob, node, "fsp,enable-pwm0");
+	fsp_upd->enable_pwm1 = fdtdec_get_bool(blob, node, "fsp,enable-pwm1");
+	fsp_upd->enable_hsi = fdtdec_get_bool(blob, node, "fsp,enable-hsi");
+	fsp_upd->igd_dvmt50_pre_alloc = fdtdec_get_int(blob, node,
+			"fsp,igd-dvmt50-pre-alloc", IGD_DVMT50_PRE_ALLOC_64MB);
+	fsp_upd->aperture_size = fdtdec_get_int(blob, node, "fsp,aperture-size",
+						APERTURE_SIZE_256MB);
+	fsp_upd->gtt_size = fdtdec_get_int(blob, node, "fsp,gtt-size",
+					   GTT_SIZE_2MB);
+	fsp_upd->mrc_debug_msg = fdtdec_get_bool(blob, node,
+						 "fsp,mrc-debug-msg");
+	fsp_upd->isp_enable = fdtdec_get_bool(blob, node, "fsp,isp-enable");
+	fsp_upd->scc_mode = fdtdec_get_int(blob, node, "fsp,scc-mode",
+					   SCC_MODE_PCI);
+	fsp_upd->igd_render_standby = fdtdec_get_bool(blob, node,
+						      "fsp,igd-render-standby");
+	fsp_upd->txe_uma_enable = fdtdec_get_bool(blob, node,
+						  "fsp,txe-uma-enable");
+	fsp_upd->os_selection = fdtdec_get_int(blob, node, "fsp,os-selection",
+					       OS_SELECTION_LINUX);
+	fsp_upd->emmc45_ddr50_enabled = fdtdec_get_bool(blob, node,
+			"fsp,emmc45-ddr50-enabled");
+	fsp_upd->emmc45_hs200_enabled = fdtdec_get_bool(blob, node,
+			"fsp,emmc45-hs200-enabled");
+	fsp_upd->emmc45_retune_timer_value = fdtdec_get_int(blob, node,
+			"fsp,emmc45-retune-timer-value", 8);
+	fsp_upd->enable_igd = fdtdec_get_bool(blob, node, "fsp,enable-igd");
+
+	mem = &fsp_upd->memory_params;
+	mem->enable_memory_down = fdtdec_get_bool(blob, node,
+						  "fsp,enable-memory-down");
+	if (mem->enable_memory_down) {
+		node = fdtdec_next_compatible(blob, node,
+					      COMPAT_INTEL_BAYTRAIL_FSP_MDP);
+		if (node < 0) {
+			debug("%s: Cannot find FSP memory-down-params node\n",
+			      __func__);
+		} else {
+			mem->dram_speed = fdtdec_get_int(blob, node,
+							 "fsp,dram-speed",
+							 DRAM_SPEED_1333MTS);
+			mem->dram_type = fdtdec_get_int(blob, node,
+							"fsp,dram-type",
+							DRAM_TYPE_DDR3L);
+			mem->dimm_0_enable = fdtdec_get_bool(blob, node,
+					"fsp,dimm-0-enable");
+			mem->dimm_1_enable = fdtdec_get_bool(blob, node,
+					"fsp,dimm-1-enable");
+			mem->dimm_width = fdtdec_get_int(blob, node,
+							 "fsp,dimm-width",
+							 DIMM_WIDTH_X8);
+			mem->dimm_density = fdtdec_get_int(blob, node,
+							   "fsp,dimm-density",
+							   DIMM_DENSITY_2GBIT);
+			mem->dimm_bus_width = fdtdec_get_int(blob, node,
+					"fsp,dimm-bus-width",
+					DIMM_BUS_WIDTH_64BITS);
+			mem->dimm_sides = fdtdec_get_int(blob, node,
+							 "fsp,dimm-sides",
+							 DIMM_SIDES_1RANKS);
+			mem->dimm_tcl = fdtdec_get_int(blob, node,
+						       "fsp,dimm-tcl", 0x09);
+			mem->dimm_trpt_rcd = fdtdec_get_int(blob, node,
+					"fsp,dimm-trpt-rcd", 0x09);
+			mem->dimm_twr = fdtdec_get_int(blob, node,
+						       "fsp,dimm-twr", 0x0a);
+			mem->dimm_twtr = fdtdec_get_int(blob, node,
+							"fsp,dimm-twtr", 0x05);
+			mem->dimm_trrd = fdtdec_get_int(blob, node,
+							"fsp,dimm-trrd", 0x04);
+			mem->dimm_trtp = fdtdec_get_int(blob, node,
+							"fsp,dimm-trtp", 0x05);
+			mem->dimm_tfaw = fdtdec_get_int(blob, node,
+							"fsp,dimm-tfaw", 0x14);
+		}
+	}
+}

source/bootloader/u-boot-2020.01/arch/x86/cpu/baytrail/valleyview.c

@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ */
+
+#include <common.h>
+#include <mmc.h>
+#include <pci_ids.h>
+#include <asm/irq.h>
+#include <asm/mrccache.h>
+#include <asm/post.h>
+#include <asm/arch/iomap.h>
+
+/* GPIO SUS */
+#define GPIO_SUS_PAD_BASE	(IO_BASE_ADDRESS + IO_BASE_OFFSET_GPSSUS)
+#define GPIO_SUS_DFX5_CONF0	0x150
+#define BYT_TRIG_LVL		BIT(24)
+#define BYT_TRIG_POS		BIT(25)
+
+int arch_cpu_init(void)
+{
+	post_code(POST_CPU_INIT);
+
+	return x86_cpu_init_f();
+}
+
+int arch_misc_init(void)
+{
+	if (!ll_boot_init())
+		return 0;
+
+#ifdef CONFIG_ENABLE_MRC_CACHE
+	/*
+	 * We intend not to check any return value here, as even MRC cache
+	 * is not saved successfully, it is not a severe error that will
+	 * prevent system from continuing to boot.
+	 */
+	mrccache_save();
+#endif
+
+	/*
+	 * For some unknown reason, FSP (gold4) for BayTrail configures
+	 * the GPIO DFX5 PAD to enable level interrupt (bit 24 and 25).
+	 * This does not cause any issue when Linux kernel runs w/ or w/o
+	 * the pinctrl driver for BayTrail. However this causes unstable
+	 * S3 resume if the pinctrl driver is included in the kernel build.
+	 * As this pin keeps generating interrupts during an S3 resume,
+	 * and there is no IRQ requester in the kernel to handle it, the
+	 * kernel seems to hang and does not continue resuming.
+	 *
+	 * Clear the mysterious interrupt bits for this pin.
+	 */
+	clrbits_le32(GPIO_SUS_PAD_BASE + GPIO_SUS_DFX5_CONF0,
+		     BYT_TRIG_LVL | BYT_TRIG_POS);
+
+	return 0;
+}