GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)

source/bootloader/u-boot-2020.01/arch/xtensa/lib/time.c

@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2008 - 2013 Tensilica Inc.
+ */
+
+#include <common.h>
+#include <time.h>
+#include <asm/global_data.h>
+#include <linux/stringify.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if XCHAL_HAVE_CCOUNT
+static ulong get_ccount(void)
+{
+	ulong ccount;
+	asm volatile ("rsr %0,"__stringify(CCOUNT) : "=a" (ccount));
+	return ccount;
+}
+#else
+static ulong fake_ccount;
+#define get_ccount() fake_ccount
+#endif
+
+static void delay_cycles(unsigned cycles)
+{
+#if XCHAL_HAVE_CCOUNT
+	unsigned expiry = get_ccount() + cycles;
+	while ((signed)(expiry - get_ccount()) > 0)
+		;
+#else
+#warning "Without Xtensa timer option, timing will not be accurate."
+
+	/*
+	 * Approximate the cycle count by a loop iteration count.
+	 * This is highly dependent on config and optimization.
+	 */
+
+	volatile unsigned i;
+	for (i = cycles >> 4U; i > 0; --i)
+		;
+	fake_ccount += cycles;
+#endif
+}
+
+/*
+ * Delay (busy-wait) for a number of microseconds.
+ */
+
+void __udelay(unsigned long usec)
+{
+	ulong lo, hi, i;
+	ulong mhz = CONFIG_SYS_CLK_FREQ / 1000000;
+
+	/* Scale to support full 32-bit usec range */
+
+	lo = usec & ((1<<22)-1);
+	hi = usec >> 22UL;
+	for (i = 0; i < hi; ++i)
+		delay_cycles(mhz << 22);
+	delay_cycles(mhz * lo);
+}
+
+
+/*
+ * Return the elapsed time (ticks) since 'base'.
+ */
+
+ulong get_timer(ulong base)
+{
+	/* Don't tie up a timer; use cycle counter if available (or fake it) */
+
+#if XCHAL_HAVE_CCOUNT
+	register ulong ccount;
+	__asm__ volatile ("rsr %0, CCOUNT" : "=a"(ccount));
+	return ccount / (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ) - base;
+#else
+	/*
+	 * Add at least the overhead of this call (in cycles).
+	 * Avoids hanging in case caller doesn't use udelay().
+	 * Note that functions that don't call udelay() (such as
+	 * the "sleep" command) will not get a significant delay
+	 * because there is no time reference.
+	 */
+
+	fake_ccount += 20;
+	return fake_ccount / (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ) - base;
+#endif
+}
+
+
+/*
+ * This function is derived from ARM/PowerPC code (read timebase as long long).
+ * On Xtensa it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from ARM/PowerPC code (timebase clock frequency).
+ * On Xtensa it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return CONFIG_SYS_HZ;
+}
+
+#if XCHAL_HAVE_CCOUNT
+unsigned long timer_get_us(void)
+{
+	unsigned long ccount;
+
+	__asm__ volatile ("rsr %0, CCOUNT" : "=a"(ccount));
+	return ccount / (CONFIG_SYS_CLK_FREQ / 1000000);
+}
+#endif