GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)
This commit is contained in:
@@ -0,0 +1,6 @@
|
||||
TURRIS OMNIA BOARD
|
||||
M: Marek Behún <marek.behun@nic.cz>
|
||||
S: Maintained
|
||||
F: board/CZ.NIC/turris_omnia/
|
||||
F: include/configs/turris_omnia.h
|
||||
F: configs/turris_omnia_defconfig
|
||||
@@ -0,0 +1,5 @@
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
# Copyright (C) 2017 Marek Behun <marek.behun@nic.cz>
|
||||
|
||||
obj-y := turris_omnia.o
|
||||
@@ -0,0 +1,536 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Copyright (C) 2017 Marek Behun <marek.behun@nic.cz>
|
||||
* Copyright (C) 2016 Tomas Hlavacek <tomas.hlavacek@nic.cz>
|
||||
*
|
||||
* Derived from the code for
|
||||
* Marvell/db-88f6820-gp by Stefan Roese <sr@denx.de>
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <env.h>
|
||||
#include <i2c.h>
|
||||
#include <init.h>
|
||||
#include <miiphy.h>
|
||||
#include <netdev.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/cpu.h>
|
||||
#include <asm/arch/soc.h>
|
||||
#include <dm/uclass.h>
|
||||
#include <fdt_support.h>
|
||||
#include <time.h>
|
||||
#include <u-boot/crc.h>
|
||||
# include <atsha204a-i2c.h>
|
||||
|
||||
#include "../drivers/ddr/marvell/a38x/ddr3_init.h"
|
||||
#include <../serdes/a38x/high_speed_env_spec.h>
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
#define OMNIA_I2C_BUS_NAME "i2c@11000->i2cmux@70->i2c@0"
|
||||
|
||||
#define OMNIA_I2C_MCU_CHIP_ADDR 0x2a
|
||||
#define OMNIA_I2C_MCU_CHIP_LEN 1
|
||||
|
||||
#define OMNIA_I2C_EEPROM_CHIP_ADDR 0x54
|
||||
#define OMNIA_I2C_EEPROM_CHIP_LEN 2
|
||||
#define OMNIA_I2C_EEPROM_MAGIC 0x0341a034
|
||||
|
||||
enum mcu_commands {
|
||||
CMD_GET_STATUS_WORD = 0x01,
|
||||
CMD_GET_RESET = 0x09,
|
||||
CMD_WATCHDOG_STATE = 0x0b,
|
||||
};
|
||||
|
||||
enum status_word_bits {
|
||||
CARD_DET_STSBIT = 0x0010,
|
||||
MSATA_IND_STSBIT = 0x0020,
|
||||
};
|
||||
|
||||
#define OMNIA_ATSHA204_OTP_VERSION 0
|
||||
#define OMNIA_ATSHA204_OTP_SERIAL 1
|
||||
#define OMNIA_ATSHA204_OTP_MAC0 3
|
||||
#define OMNIA_ATSHA204_OTP_MAC1 4
|
||||
|
||||
/*
|
||||
* Those values and defines are taken from the Marvell U-Boot version
|
||||
* "u-boot-2013.01-2014_T3.0"
|
||||
*/
|
||||
#define OMNIA_GPP_OUT_ENA_LOW \
|
||||
(~(BIT(1) | BIT(4) | BIT(6) | BIT(7) | BIT(8) | BIT(9) | \
|
||||
BIT(10) | BIT(11) | BIT(19) | BIT(22) | BIT(23) | BIT(25) | \
|
||||
BIT(26) | BIT(27) | BIT(29) | BIT(30) | BIT(31)))
|
||||
#define OMNIA_GPP_OUT_ENA_MID \
|
||||
(~(BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(15) | \
|
||||
BIT(16) | BIT(17) | BIT(18)))
|
||||
|
||||
#define OMNIA_GPP_OUT_VAL_LOW 0x0
|
||||
#define OMNIA_GPP_OUT_VAL_MID 0x0
|
||||
#define OMNIA_GPP_POL_LOW 0x0
|
||||
#define OMNIA_GPP_POL_MID 0x0
|
||||
|
||||
static struct serdes_map board_serdes_map_pex[] = {
|
||||
{PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
|
||||
{USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
|
||||
{PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
|
||||
{USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
|
||||
{PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
|
||||
{SGMII2, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0}
|
||||
};
|
||||
|
||||
static struct serdes_map board_serdes_map_sata[] = {
|
||||
{SATA0, SERDES_SPEED_6_GBPS, SERDES_DEFAULT_MODE, 0, 0},
|
||||
{USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
|
||||
{PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
|
||||
{USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
|
||||
{PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
|
||||
{SGMII2, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0}
|
||||
};
|
||||
|
||||
static struct udevice *omnia_get_i2c_chip(const char *name, uint addr,
|
||||
uint offset_len)
|
||||
{
|
||||
struct udevice *bus, *dev;
|
||||
int ret;
|
||||
|
||||
ret = uclass_get_device_by_name(UCLASS_I2C, OMNIA_I2C_BUS_NAME, &bus);
|
||||
if (ret) {
|
||||
printf("Cannot get I2C bus %s: uclass_get_device_by_name failed: %i\n",
|
||||
OMNIA_I2C_BUS_NAME, ret);
|
||||
return NULL;
|
||||
}
|
||||
|
||||
ret = i2c_get_chip(bus, addr, offset_len, &dev);
|
||||
if (ret) {
|
||||
printf("Cannot get %s I2C chip: i2c_get_chip failed: %i\n",
|
||||
name, ret);
|
||||
return NULL;
|
||||
}
|
||||
|
||||
return dev;
|
||||
}
|
||||
|
||||
static int omnia_mcu_read(u8 cmd, void *buf, int len)
|
||||
{
|
||||
struct udevice *chip;
|
||||
|
||||
chip = omnia_get_i2c_chip("MCU", OMNIA_I2C_MCU_CHIP_ADDR,
|
||||
OMNIA_I2C_MCU_CHIP_LEN);
|
||||
if (!chip)
|
||||
return -ENODEV;
|
||||
|
||||
return dm_i2c_read(chip, cmd, buf, len);
|
||||
}
|
||||
|
||||
#ifndef CONFIG_SPL_BUILD
|
||||
static int omnia_mcu_write(u8 cmd, const void *buf, int len)
|
||||
{
|
||||
struct udevice *chip;
|
||||
|
||||
chip = omnia_get_i2c_chip("MCU", OMNIA_I2C_MCU_CHIP_ADDR,
|
||||
OMNIA_I2C_MCU_CHIP_LEN);
|
||||
if (!chip)
|
||||
return -ENODEV;
|
||||
|
||||
return dm_i2c_write(chip, cmd, buf, len);
|
||||
}
|
||||
|
||||
static bool disable_mcu_watchdog(void)
|
||||
{
|
||||
int ret;
|
||||
|
||||
puts("Disabling MCU watchdog... ");
|
||||
|
||||
ret = omnia_mcu_write(CMD_WATCHDOG_STATE, "\x00", 1);
|
||||
if (ret) {
|
||||
printf("omnia_mcu_write failed: %i\n", ret);
|
||||
return false;
|
||||
}
|
||||
|
||||
puts("disabled\n");
|
||||
|
||||
return true;
|
||||
}
|
||||
#endif
|
||||
|
||||
static bool omnia_detect_sata(void)
|
||||
{
|
||||
int ret;
|
||||
u16 stsword;
|
||||
|
||||
puts("MiniPCIe/mSATA card detection... ");
|
||||
|
||||
ret = omnia_mcu_read(CMD_GET_STATUS_WORD, &stsword, sizeof(stsword));
|
||||
if (ret) {
|
||||
printf("omnia_mcu_read failed: %i, defaulting to MiniPCIe card\n",
|
||||
ret);
|
||||
return false;
|
||||
}
|
||||
|
||||
if (!(stsword & CARD_DET_STSBIT)) {
|
||||
puts("none\n");
|
||||
return false;
|
||||
}
|
||||
|
||||
if (stsword & MSATA_IND_STSBIT)
|
||||
puts("mSATA\n");
|
||||
else
|
||||
puts("MiniPCIe\n");
|
||||
|
||||
return stsword & MSATA_IND_STSBIT ? true : false;
|
||||
}
|
||||
|
||||
int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count)
|
||||
{
|
||||
if (omnia_detect_sata()) {
|
||||
*serdes_map_array = board_serdes_map_sata;
|
||||
*count = ARRAY_SIZE(board_serdes_map_sata);
|
||||
} else {
|
||||
*serdes_map_array = board_serdes_map_pex;
|
||||
*count = ARRAY_SIZE(board_serdes_map_pex);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
struct omnia_eeprom {
|
||||
u32 magic;
|
||||
u32 ramsize;
|
||||
char region[4];
|
||||
u32 crc;
|
||||
};
|
||||
|
||||
static bool omnia_read_eeprom(struct omnia_eeprom *oep)
|
||||
{
|
||||
struct udevice *chip;
|
||||
u32 crc;
|
||||
int ret;
|
||||
|
||||
chip = omnia_get_i2c_chip("EEPROM", OMNIA_I2C_EEPROM_CHIP_ADDR,
|
||||
OMNIA_I2C_EEPROM_CHIP_LEN);
|
||||
|
||||
if (!chip)
|
||||
return false;
|
||||
|
||||
ret = dm_i2c_read(chip, 0, (void *)oep, sizeof(*oep));
|
||||
if (ret) {
|
||||
printf("dm_i2c_read failed: %i, cannot read EEPROM\n", ret);
|
||||
return false;
|
||||
}
|
||||
|
||||
if (oep->magic != OMNIA_I2C_EEPROM_MAGIC) {
|
||||
printf("bad EEPROM magic number (%08x, should be %08x)\n",
|
||||
oep->magic, OMNIA_I2C_EEPROM_MAGIC);
|
||||
return false;
|
||||
}
|
||||
|
||||
crc = crc32(0, (void *)oep, sizeof(*oep) - 4);
|
||||
if (crc != oep->crc) {
|
||||
printf("bad EEPROM CRC (stored %08x, computed %08x)\n",
|
||||
oep->crc, crc);
|
||||
return false;
|
||||
}
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
static int omnia_get_ram_size_gb(void)
|
||||
{
|
||||
static int ram_size;
|
||||
struct omnia_eeprom oep;
|
||||
|
||||
if (!ram_size) {
|
||||
/* Get the board config from EEPROM */
|
||||
if (omnia_read_eeprom(&oep)) {
|
||||
debug("Memory config in EEPROM: 0x%02x\n", oep.ramsize);
|
||||
|
||||
if (oep.ramsize == 0x2)
|
||||
ram_size = 2;
|
||||
else
|
||||
ram_size = 1;
|
||||
} else {
|
||||
/* Hardcoded fallback */
|
||||
puts("Memory config from EEPROM read failed!\n");
|
||||
puts("Falling back to default 1 GiB!\n");
|
||||
ram_size = 1;
|
||||
}
|
||||
}
|
||||
|
||||
return ram_size;
|
||||
}
|
||||
|
||||
/*
|
||||
* Define the DDR layout / topology here in the board file. This will
|
||||
* be used by the DDR3 init code in the SPL U-Boot version to configure
|
||||
* the DDR3 controller.
|
||||
*/
|
||||
static struct mv_ddr_topology_map board_topology_map_1g = {
|
||||
DEBUG_LEVEL_ERROR,
|
||||
0x1, /* active interfaces */
|
||||
/* cs_mask, mirror, dqs_swap, ck_swap X PUPs */
|
||||
{ { { {0x1, 0, 0, 0},
|
||||
{0x1, 0, 0, 0},
|
||||
{0x1, 0, 0, 0},
|
||||
{0x1, 0, 0, 0},
|
||||
{0x1, 0, 0, 0} },
|
||||
SPEED_BIN_DDR_1600K, /* speed_bin */
|
||||
MV_DDR_DEV_WIDTH_16BIT, /* memory_width */
|
||||
MV_DDR_DIE_CAP_4GBIT, /* mem_size */
|
||||
MV_DDR_FREQ_800, /* frequency */
|
||||
0, 0, /* cas_wl cas_l */
|
||||
MV_DDR_TEMP_NORMAL, /* temperature */
|
||||
MV_DDR_TIM_2T} }, /* timing */
|
||||
BUS_MASK_32BIT, /* Busses mask */
|
||||
MV_DDR_CFG_DEFAULT, /* ddr configuration data source */
|
||||
{ {0} }, /* raw spd data */
|
||||
{0} /* timing parameters */
|
||||
};
|
||||
|
||||
static struct mv_ddr_topology_map board_topology_map_2g = {
|
||||
DEBUG_LEVEL_ERROR,
|
||||
0x1, /* active interfaces */
|
||||
/* cs_mask, mirror, dqs_swap, ck_swap X PUPs */
|
||||
{ { { {0x1, 0, 0, 0},
|
||||
{0x1, 0, 0, 0},
|
||||
{0x1, 0, 0, 0},
|
||||
{0x1, 0, 0, 0},
|
||||
{0x1, 0, 0, 0} },
|
||||
SPEED_BIN_DDR_1600K, /* speed_bin */
|
||||
MV_DDR_DEV_WIDTH_16BIT, /* memory_width */
|
||||
MV_DDR_DIE_CAP_8GBIT, /* mem_size */
|
||||
MV_DDR_FREQ_800, /* frequency */
|
||||
0, 0, /* cas_wl cas_l */
|
||||
MV_DDR_TEMP_NORMAL, /* temperature */
|
||||
MV_DDR_TIM_2T} }, /* timing */
|
||||
BUS_MASK_32BIT, /* Busses mask */
|
||||
MV_DDR_CFG_DEFAULT, /* ddr configuration data source */
|
||||
{ {0} }, /* raw spd data */
|
||||
{0} /* timing parameters */
|
||||
};
|
||||
|
||||
struct mv_ddr_topology_map *mv_ddr_topology_map_get(void)
|
||||
{
|
||||
if (omnia_get_ram_size_gb() == 2)
|
||||
return &board_topology_map_2g;
|
||||
else
|
||||
return &board_topology_map_1g;
|
||||
}
|
||||
|
||||
#ifndef CONFIG_SPL_BUILD
|
||||
static int set_regdomain(void)
|
||||
{
|
||||
struct omnia_eeprom oep;
|
||||
char rd[3] = {' ', ' ', 0};
|
||||
|
||||
if (omnia_read_eeprom(&oep))
|
||||
memcpy(rd, &oep.region, 2);
|
||||
else
|
||||
puts("EEPROM regdomain read failed.\n");
|
||||
|
||||
printf("Regdomain set to %s\n", rd);
|
||||
return env_set("regdomain", rd);
|
||||
}
|
||||
|
||||
/*
|
||||
* default factory reset bootcommand on Omnia first sets all the front LEDs
|
||||
* to green and then tries to load the rescue image from SPI flash memory and
|
||||
* boot it
|
||||
*/
|
||||
#define OMNIA_FACTORY_RESET_BOOTCMD \
|
||||
"i2c dev 2; " \
|
||||
"i2c mw 0x2a.1 0x3 0x1c 1; " \
|
||||
"i2c mw 0x2a.1 0x4 0x1c 1; " \
|
||||
"mw.l 0x01000000 0x00ff000c; " \
|
||||
"i2c write 0x01000000 0x2a.1 0x5 4 -s; " \
|
||||
"setenv bootargs \"earlyprintk console=ttyS0,115200" \
|
||||
" omniarescue=$omnia_reset\"; " \
|
||||
"sf probe; " \
|
||||
"sf read 0x1000000 0x100000 0x700000; " \
|
||||
"bootm 0x1000000; " \
|
||||
"bootz 0x1000000"
|
||||
|
||||
static void handle_reset_button(void)
|
||||
{
|
||||
int ret;
|
||||
u8 reset_status;
|
||||
|
||||
ret = omnia_mcu_read(CMD_GET_RESET, &reset_status, 1);
|
||||
if (ret) {
|
||||
printf("omnia_mcu_read failed: %i, reset status unknown!\n",
|
||||
ret);
|
||||
return;
|
||||
}
|
||||
|
||||
env_set_ulong("omnia_reset", reset_status);
|
||||
|
||||
if (reset_status) {
|
||||
printf("RESET button was pressed, overwriting bootcmd!\n");
|
||||
env_set("bootcmd", OMNIA_FACTORY_RESET_BOOTCMD);
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
int board_early_init_f(void)
|
||||
{
|
||||
/* Configure MPP */
|
||||
writel(0x11111111, MVEBU_MPP_BASE + 0x00);
|
||||
writel(0x11111111, MVEBU_MPP_BASE + 0x04);
|
||||
writel(0x11244011, MVEBU_MPP_BASE + 0x08);
|
||||
writel(0x22222111, MVEBU_MPP_BASE + 0x0c);
|
||||
writel(0x22200002, MVEBU_MPP_BASE + 0x10);
|
||||
writel(0x30042022, MVEBU_MPP_BASE + 0x14);
|
||||
writel(0x55550555, MVEBU_MPP_BASE + 0x18);
|
||||
writel(0x00005550, MVEBU_MPP_BASE + 0x1c);
|
||||
|
||||
/* Set GPP Out value */
|
||||
writel(OMNIA_GPP_OUT_VAL_LOW, MVEBU_GPIO0_BASE + 0x00);
|
||||
writel(OMNIA_GPP_OUT_VAL_MID, MVEBU_GPIO1_BASE + 0x00);
|
||||
|
||||
/* Set GPP Polarity */
|
||||
writel(OMNIA_GPP_POL_LOW, MVEBU_GPIO0_BASE + 0x0c);
|
||||
writel(OMNIA_GPP_POL_MID, MVEBU_GPIO1_BASE + 0x0c);
|
||||
|
||||
/* Set GPP Out Enable */
|
||||
writel(OMNIA_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04);
|
||||
writel(OMNIA_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
/* address of boot parameters */
|
||||
gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
|
||||
|
||||
#ifndef CONFIG_SPL_BUILD
|
||||
disable_mcu_watchdog();
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_late_init(void)
|
||||
{
|
||||
#ifndef CONFIG_SPL_BUILD
|
||||
set_regdomain();
|
||||
handle_reset_button();
|
||||
#endif
|
||||
pci_init();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct udevice *get_atsha204a_dev(void)
|
||||
{
|
||||
static struct udevice *dev;
|
||||
|
||||
if (dev)
|
||||
return dev;
|
||||
|
||||
if (uclass_get_device_by_name(UCLASS_MISC, "atsha204a@64", &dev)) {
|
||||
puts("Cannot find ATSHA204A on I2C bus!\n");
|
||||
dev = NULL;
|
||||
}
|
||||
|
||||
return dev;
|
||||
}
|
||||
|
||||
int checkboard(void)
|
||||
{
|
||||
u32 version_num, serial_num;
|
||||
int err = 1;
|
||||
|
||||
struct udevice *dev = get_atsha204a_dev();
|
||||
|
||||
if (dev) {
|
||||
err = atsha204a_wakeup(dev);
|
||||
if (err)
|
||||
goto out;
|
||||
|
||||
err = atsha204a_read(dev, ATSHA204A_ZONE_OTP, false,
|
||||
OMNIA_ATSHA204_OTP_VERSION,
|
||||
(u8 *)&version_num);
|
||||
if (err)
|
||||
goto out;
|
||||
|
||||
err = atsha204a_read(dev, ATSHA204A_ZONE_OTP, false,
|
||||
OMNIA_ATSHA204_OTP_SERIAL,
|
||||
(u8 *)&serial_num);
|
||||
if (err)
|
||||
goto out;
|
||||
|
||||
atsha204a_sleep(dev);
|
||||
}
|
||||
|
||||
out:
|
||||
printf("Turris Omnia:\n");
|
||||
printf(" RAM size: %i MiB\n", omnia_get_ram_size_gb() * 1024);
|
||||
if (err)
|
||||
printf(" Serial Number: unknown\n");
|
||||
else
|
||||
printf(" Serial Number: %08X%08X\n", be32_to_cpu(version_num),
|
||||
be32_to_cpu(serial_num));
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void increment_mac(u8 *mac)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 5; i >= 3; i--) {
|
||||
mac[i] += 1;
|
||||
if (mac[i])
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
int misc_init_r(void)
|
||||
{
|
||||
int err;
|
||||
struct udevice *dev = get_atsha204a_dev();
|
||||
u8 mac0[4], mac1[4], mac[6];
|
||||
|
||||
if (!dev)
|
||||
goto out;
|
||||
|
||||
err = atsha204a_wakeup(dev);
|
||||
if (err)
|
||||
goto out;
|
||||
|
||||
err = atsha204a_read(dev, ATSHA204A_ZONE_OTP, false,
|
||||
OMNIA_ATSHA204_OTP_MAC0, mac0);
|
||||
if (err)
|
||||
goto out;
|
||||
|
||||
err = atsha204a_read(dev, ATSHA204A_ZONE_OTP, false,
|
||||
OMNIA_ATSHA204_OTP_MAC1, mac1);
|
||||
if (err)
|
||||
goto out;
|
||||
|
||||
atsha204a_sleep(dev);
|
||||
|
||||
mac[0] = mac0[1];
|
||||
mac[1] = mac0[2];
|
||||
mac[2] = mac0[3];
|
||||
mac[3] = mac1[1];
|
||||
mac[4] = mac1[2];
|
||||
mac[5] = mac1[3];
|
||||
|
||||
if (is_valid_ethaddr(mac))
|
||||
eth_env_set_enetaddr("eth1addr", mac);
|
||||
|
||||
increment_mac(mac);
|
||||
|
||||
if (is_valid_ethaddr(mac))
|
||||
eth_env_set_enetaddr("eth2addr", mac);
|
||||
|
||||
increment_mac(mac);
|
||||
|
||||
if (is_valid_ethaddr(mac))
|
||||
eth_env_set_enetaddr("ethaddr", mac);
|
||||
|
||||
out:
|
||||
return 0;
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user