GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)
This commit is contained in:
@@ -0,0 +1,7 @@
|
||||
W400
|
||||
M: Neil Armstrong <narmstrong@baylibre.com>
|
||||
S: Maintained
|
||||
L: u-boot-amlogic@groups.io
|
||||
F: board/amlogic/w400/
|
||||
F: configs/khadas-vim3_defconfig
|
||||
F: configs/odroid-n2_defconfig
|
||||
@@ -0,0 +1,6 @@
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
# (C) Copyright 2019 BayLibre, SAS
|
||||
# Author: Neil Armstrong <narmstrong@baylibre.com>
|
||||
|
||||
obj-y := w400.o
|
||||
@@ -0,0 +1,132 @@
|
||||
U-Boot for Khadas VIM3
|
||||
======================
|
||||
|
||||
Khadas VIM3 is a single board computer manufactured by Shenzhen Wesion
|
||||
Technology Co., Ltd. with the following specifications:
|
||||
|
||||
- Amlogic A311D Arm Cortex-A53 dual-core + Cortex-A73 quad-core SoC
|
||||
- 4GB LPDDR4 SDRAM
|
||||
- Gigabit Ethernet
|
||||
- HDMI 2.1 display
|
||||
- 40-pin GPIO header
|
||||
- 1 x USB 3.0 Host, 1 x USB 2.0 Host
|
||||
- eMMC, microSD
|
||||
- M.2
|
||||
- Infrared receiver
|
||||
|
||||
Schematics are available on the manufacturer website.
|
||||
|
||||
Currently the U-Boot port supports the following devices:
|
||||
- serial
|
||||
- eMMC, microSD
|
||||
- Ethernet
|
||||
- I2C
|
||||
- Regulators
|
||||
- Reset controller
|
||||
- Clock controller
|
||||
- ADC
|
||||
|
||||
u-boot compilation
|
||||
==================
|
||||
|
||||
> export ARCH=arm
|
||||
> export CROSS_COMPILE=aarch64-none-elf-
|
||||
> make khadas-vim3_defconfig
|
||||
> make
|
||||
|
||||
Image creation
|
||||
==============
|
||||
|
||||
Amlogic doesn't provide sources for the firmware and for tools needed
|
||||
to create the bootloader image, so it is necessary to obtain them from
|
||||
the git tree published by the board vendor:
|
||||
|
||||
> wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
|
||||
> wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
|
||||
> tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
|
||||
> tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
|
||||
> export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
|
||||
|
||||
> DIR=vim3-u-boot
|
||||
> git clone --depth 1 \
|
||||
https://github.com/khadas/u-boot.git -b khadas-vims-v2015.01 \
|
||||
$DIR
|
||||
|
||||
> cd vim3-u-boot
|
||||
> make kvim3_defconfig
|
||||
> make
|
||||
> export UBOOTDIR=$PWD
|
||||
|
||||
Go back to mainline U-Boot source tree then :
|
||||
> mkdir fip
|
||||
|
||||
> cp $UBOOTDIR/build/scp_task/bl301.bin fip/
|
||||
> cp $UBOOTDIR/build/board/khadas/kvim3/firmware/acs.bin fip/
|
||||
> cp $UBOOTDIR/fip/g12b/bl2.bin fip/
|
||||
> cp $UBOOTDIR/fip/g12b/bl30.bin fip/
|
||||
> cp $UBOOTDIR/fip/g12b/bl31.img fip/
|
||||
> cp $UBOOTDIR/fip/g12b/ddr3_1d.fw fip/
|
||||
> cp $UBOOTDIR/fip/g12b/ddr4_1d.fw fip/
|
||||
> cp $UBOOTDIR/fip/g12b/ddr4_2d.fw fip/
|
||||
> cp $UBOOTDIR/fip/g12b/diag_lpddr4.fw fip/
|
||||
> cp $UBOOTDIR/fip/g12b/lpddr3_1d.fw fip/
|
||||
> cp $UBOOTDIR/fip/g12b/lpddr4_1d.fw fip/
|
||||
> cp $UBOOTDIR/fip/g12b/lpddr4_2d.fw fip/
|
||||
> cp $UBOOTDIR/fip/g12b/piei.fw fip/
|
||||
> cp $UBOOTDIR/fip/g12b/aml_ddr.fw fip/
|
||||
> cp u-boot.bin fip/bl33.bin
|
||||
|
||||
> sh fip/blx_fix.sh \
|
||||
fip/bl30.bin \
|
||||
fip/zero_tmp \
|
||||
fip/bl30_zero.bin \
|
||||
fip/bl301.bin \
|
||||
fip/bl301_zero.bin \
|
||||
fip/bl30_new.bin \
|
||||
bl30
|
||||
|
||||
> sh fip/blx_fix.sh \
|
||||
fip/bl2.bin \
|
||||
fip/zero_tmp \
|
||||
fip/bl2_zero.bin \
|
||||
fip/acs.bin \
|
||||
fip/bl21_zero.bin \
|
||||
fip/bl2_new.bin \
|
||||
bl2
|
||||
|
||||
> $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
|
||||
--output fip/bl30_new.bin.g12a.enc \
|
||||
--level v3
|
||||
> $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
|
||||
--output fip/bl30_new.bin.enc \
|
||||
--level v3 --type bl30
|
||||
> $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
|
||||
--output fip/bl31.img.enc \
|
||||
--level v3 --type bl31
|
||||
> $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
|
||||
--output fip/bl33.bin.enc \
|
||||
--level v3 --type bl33 --compress lz4
|
||||
> $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
|
||||
--output fip/bl2.n.bin.sig
|
||||
> $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bootmk \
|
||||
--output fip/u-boot.bin \
|
||||
--bl2 fip/bl2.n.bin.sig \
|
||||
--bl30 fip/bl30_new.bin.enc \
|
||||
--bl31 fip/bl31.img.enc \
|
||||
--bl33 fip/bl33.bin.enc \
|
||||
--ddrfw1 fip/ddr4_1d.fw \
|
||||
--ddrfw2 fip/ddr4_2d.fw \
|
||||
--ddrfw3 fip/ddr3_1d.fw \
|
||||
--ddrfw4 fip/piei.fw \
|
||||
--ddrfw5 fip/lpddr4_1d.fw \
|
||||
--ddrfw6 fip/lpddr4_2d.fw \
|
||||
--ddrfw7 fip/diag_lpddr4.fw \
|
||||
--ddrfw8 fip/aml_ddr.fw \
|
||||
--ddrfw9 fip/lpddr3_1d.fw \
|
||||
--level v3
|
||||
|
||||
and then write the image to SD with:
|
||||
|
||||
> DEV=/dev/your_sd_device
|
||||
> dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
|
||||
> dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
|
||||
@@ -0,0 +1,130 @@
|
||||
U-Boot for ODROID-N2
|
||||
====================
|
||||
|
||||
ODROID-N2 is a single board computer manufactured by Hardkernel
|
||||
Co. Ltd with the following specifications:
|
||||
|
||||
- Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC
|
||||
- 4GB DDR4 SDRAM
|
||||
- Gigabit Ethernet
|
||||
- HDMI 2.1 4K/60Hz display
|
||||
- 40-pin GPIO header
|
||||
- 4 x USB 3.0 Host, 1 x USB OTG
|
||||
- eMMC, microSD
|
||||
- Infrared receiver
|
||||
|
||||
Schematics are available on the manufacturer website.
|
||||
|
||||
Currently the u-boot port supports the following devices:
|
||||
- serial
|
||||
- eMMC, microSD
|
||||
- Ethernet
|
||||
- I2C
|
||||
- Regulators
|
||||
- Reset controller
|
||||
- Clock controller
|
||||
- ADC
|
||||
|
||||
u-boot compilation
|
||||
==================
|
||||
|
||||
> export ARCH=arm
|
||||
> export CROSS_COMPILE=aarch64-none-elf-
|
||||
> make odroid-n2_defconfig
|
||||
> make
|
||||
|
||||
Image creation
|
||||
==============
|
||||
|
||||
Amlogic doesn't provide sources for the firmware and for tools needed
|
||||
to create the bootloader image, so it is necessary to obtain them from
|
||||
the git tree published by the board vendor:
|
||||
|
||||
> wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
|
||||
> wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
|
||||
> tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
|
||||
> tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
|
||||
> export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
|
||||
|
||||
> DIR=odroid-n2
|
||||
> git clone --depth 1 \
|
||||
https://github.com/hardkernel/u-boot.git -b odroidn2-v2015.01 \
|
||||
$DIR
|
||||
|
||||
> cd odroid-n2
|
||||
> make odroidn2_defconfig
|
||||
> make
|
||||
> export UBOOTDIR=$PWD
|
||||
|
||||
Go back to mainline U-Boot source tree then :
|
||||
> mkdir fip
|
||||
|
||||
> wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh
|
||||
> cp $UBOOTDIR/build/scp_task/bl301.bin fip/
|
||||
> cp $UBOOTDIR/build/board/hardkernel/odroidn2/firmware/acs.bin fip/
|
||||
> cp $UBOOTDIR/fip/g12b/bl2.bin fip/
|
||||
> cp $UBOOTDIR/fip/g12b/bl30.bin fip/
|
||||
> cp $UBOOTDIR/fip/g12b/bl31.img fip/
|
||||
> cp $UBOOTDIR/fip/g12b/ddr3_1d.fw fip/
|
||||
> cp $UBOOTDIR/fip/g12b/ddr4_1d.fw fip/
|
||||
> cp $UBOOTDIR/fip/g12b/ddr4_2d.fw fip/
|
||||
> cp $UBOOTDIR/fip/g12b/diag_lpddr4.fw fip/
|
||||
> cp $UBOOTDIR/fip/g12b/lpddr4_1d.fw fip/
|
||||
> cp $UBOOTDIR/fip/g12b/lpddr4_2d.fw fip/
|
||||
> cp $UBOOTDIR/fip/g12b/piei.fw fip/
|
||||
> cp $UBOOTDIR/fip/g12b/aml_ddr.fw fip/
|
||||
> cp u-boot.bin fip/bl33.bin
|
||||
|
||||
> sh fip/blx_fix.sh \
|
||||
fip/bl30.bin \
|
||||
fip/zero_tmp \
|
||||
fip/bl30_zero.bin \
|
||||
fip/bl301.bin \
|
||||
fip/bl301_zero.bin \
|
||||
fip/bl30_new.bin \
|
||||
bl30
|
||||
|
||||
> sh fip/blx_fix.sh \
|
||||
fip/bl2.bin \
|
||||
fip/zero_tmp \
|
||||
fip/bl2_zero.bin \
|
||||
fip/acs.bin \
|
||||
fip/bl21_zero.bin \
|
||||
fip/bl2_new.bin \
|
||||
bl2
|
||||
|
||||
> $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
|
||||
--output fip/bl30_new.bin.g12a.enc \
|
||||
--level v3
|
||||
> $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
|
||||
--output fip/bl30_new.bin.enc \
|
||||
--level v3 --type bl30
|
||||
> $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
|
||||
--output fip/bl31.img.enc \
|
||||
--level v3 --type bl31
|
||||
> $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
|
||||
--output fip/bl33.bin.enc \
|
||||
--level v3 --type bl33 --compress lz4
|
||||
> $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
|
||||
--output fip/bl2.n.bin.sig
|
||||
> $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bootmk \
|
||||
--output fip/u-boot.bin \
|
||||
--bl2 fip/bl2.n.bin.sig \
|
||||
--bl30 fip/bl30_new.bin.enc \
|
||||
--bl31 fip/bl31.img.enc \
|
||||
--bl33 fip/bl33.bin.enc \
|
||||
--ddrfw1 fip/ddr4_1d.fw \
|
||||
--ddrfw2 fip/ddr4_2d.fw \
|
||||
--ddrfw3 fip/ddr3_1d.fw \
|
||||
--ddrfw4 fip/piei.fw \
|
||||
--ddrfw5 fip/lpddr4_1d.fw \
|
||||
--ddrfw6 fip/lpddr4_2d.fw \
|
||||
--ddrfw7 fip/diag_lpddr4.fw \
|
||||
--ddrfw8 fip/aml_ddr.fw \
|
||||
--level v3
|
||||
|
||||
and then write the image to SD with:
|
||||
|
||||
> DEV=/dev/your_sd_device
|
||||
> dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
|
||||
> dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
|
||||
@@ -0,0 +1,130 @@
|
||||
U-Boot for Amlogic W400
|
||||
=======================
|
||||
|
||||
U200 is a reference board manufactured by Amlogic with the following
|
||||
specifications:
|
||||
|
||||
- Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC
|
||||
- 2GB DDR4 SDRAM
|
||||
- 10/100 Ethernet (Internal PHY)
|
||||
- 1 x USB 3.0 Host
|
||||
- eMMC
|
||||
- SDcard
|
||||
- Infrared receiver
|
||||
- SDIO WiFi Module
|
||||
- MIPI DSI Connector
|
||||
- Audio HAT Connector
|
||||
- PCI-E M.2 Connector
|
||||
|
||||
Schematics are available from Amlogic on demand.
|
||||
|
||||
Currently the u-boot port supports the following devices:
|
||||
- serial
|
||||
- Ethernet
|
||||
- Regulators
|
||||
- Clock controller
|
||||
|
||||
u-boot compilation
|
||||
==================
|
||||
|
||||
> export ARCH=arm
|
||||
> export CROSS_COMPILE=aarch64-none-elf-
|
||||
> make w400_defconfig
|
||||
> make
|
||||
|
||||
Image creation
|
||||
==============
|
||||
|
||||
Amlogic doesn't provide sources for the firmware and for tools needed
|
||||
to create the bootloader image, so it is necessary to obtain them from
|
||||
the git tree published by the board vendor:
|
||||
|
||||
> wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
|
||||
> wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
|
||||
> tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
|
||||
> tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
|
||||
> export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
|
||||
> git clone https://github.com/BayLibre/u-boot.git -b buildroot-openlinux-20180418 amlogic-u-boot
|
||||
> cd amlogic-u-boot
|
||||
> make g12b_w400_v1_defconfig
|
||||
> make
|
||||
> export UBOOTDIR=$PWD
|
||||
|
||||
Download the latest Amlogic Buildroot package, and extract it :
|
||||
> wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz
|
||||
> tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180706/bootloader
|
||||
> export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180706
|
||||
> export FIPDIR=$BRDIR/bootloader/uboot-repo/fip
|
||||
|
||||
Go back to mainline U-Boot source tree then :
|
||||
> mkdir fip
|
||||
|
||||
> wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh
|
||||
> cp $UBOOTDIR/build/scp_task/bl301.bin fip/
|
||||
> cp $UBOOTDIR/build/board/amlogic/g12b_w400_v1/firmware/acs.bin fip/
|
||||
> cp $BRDIR/bootloader/uboot-repo/bl2/bin/g12b/bl2.bin fip/
|
||||
> cp $BRDIR/bootloader/uboot-repo/bl30/bin/g12b/bl30.bin fip/
|
||||
> cp $BRDIR/bootloader/uboot-repo/bl31_1.3/bin/g12b/bl31.img fip/
|
||||
> cp $FIPDIR/g12b/ddr3_1d.fw fip/
|
||||
> cp $FIPDIR/g12b/ddr4_1d.fw fip/
|
||||
> cp $FIPDIR/g12b/ddr4_2d.fw fip/
|
||||
> cp $FIPDIR/g12b/diag_lpddr4.fw fip/
|
||||
> cp $FIPDIR/g12b/lpddr4_1d.fw fip/
|
||||
> cp $FIPDIR/g12b/lpddr4_2d.fw fip/
|
||||
> cp $FIPDIR/g12b/piei.fw fip/
|
||||
> cp $FIPDIR/g12b/aml_ddr.fw fip/
|
||||
> cp u-boot.bin fip/bl33.bin
|
||||
|
||||
> sh fip/blx_fix.sh \
|
||||
fip/bl30.bin \
|
||||
fip/zero_tmp \
|
||||
fip/bl30_zero.bin \
|
||||
fip/bl301.bin \
|
||||
fip/bl301_zero.bin \
|
||||
fip/bl30_new.bin \
|
||||
bl30
|
||||
|
||||
> sh fip/blx_fix.sh \
|
||||
fip/bl2.bin \
|
||||
fip/zero_tmp \
|
||||
fip/bl2_zero.bin \
|
||||
fip/acs.bin \
|
||||
fip/bl21_zero.bin \
|
||||
fip/bl2_new.bin \
|
||||
bl2
|
||||
|
||||
> $FIPDIR/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
|
||||
--output fip/bl30_new.bin.g12a.enc \
|
||||
--level v3
|
||||
> $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
|
||||
--output fip/bl30_new.bin.enc \
|
||||
--level v3 --type bl30
|
||||
> $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
|
||||
--output fip/bl31.img.enc \
|
||||
--level v3 --type bl31
|
||||
> $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
|
||||
--output fip/bl33.bin.enc \
|
||||
--level v3 --type bl33
|
||||
> $FIPDIR/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
|
||||
--output fip/bl2.n.bin.sig
|
||||
> $FIPDIR/g12b/aml_encrypt_g12b --bootmk \
|
||||
--output fip/u-boot.bin \
|
||||
--bl2 fip/bl2.n.bin.sig \
|
||||
--bl30 fip/bl30_new.bin.enc \
|
||||
--bl31 fip/bl31.img.enc \
|
||||
--bl33 fip/bl33.bin.enc \
|
||||
--ddrfw1 fip/ddr4_1d.fw \
|
||||
--ddrfw2 fip/ddr4_2d.fw \
|
||||
--ddrfw3 fip/ddr3_1d.fw \
|
||||
--ddrfw4 fip/piei.fw \
|
||||
--ddrfw5 fip/lpddr4_1d.fw \
|
||||
--ddrfw6 fip/lpddr4_2d.fw \
|
||||
--ddrfw7 fip/diag_lpddr4.fw \
|
||||
--ddrfw8 fip/aml_ddr.fw \
|
||||
--level v3
|
||||
|
||||
and then write the image to SD with:
|
||||
|
||||
> DEV=/dev/your_sd_device
|
||||
> dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
|
||||
> dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
|
||||
@@ -0,0 +1,18 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Copyright (C) 2016 BayLibre, SAS
|
||||
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <dm.h>
|
||||
#include <env_internal.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/eth.h>
|
||||
|
||||
int misc_init_r(void)
|
||||
{
|
||||
meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
|
||||
|
||||
return 0;
|
||||
}
|
||||
Reference in New Issue
Block a user