GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)
This commit is contained in:
@@ -0,0 +1,114 @@
|
||||
Summary
|
||||
=======
|
||||
|
||||
This document covers various features of the 'am335x_shc' build.
|
||||
|
||||
Hardware
|
||||
========
|
||||
|
||||
AM335X based board:
|
||||
|
||||
I2C: ready
|
||||
DRAM: 512 MiB
|
||||
Enabling the D-Cache
|
||||
MMC: OMAP SD/MMC: 0 @ 26 MHz, OMAP SD/MMC: 1 @ 26 MHz
|
||||
Net: cpsw
|
||||
|
||||
Following boot options are possible:
|
||||
|
||||
2 Jumpers:
|
||||
|
||||
Jumper 1 Jumper 2 Bootmode
|
||||
off off eMMC boot
|
||||
on off SD boot
|
||||
off on Net boot
|
||||
|
||||
Compiling
|
||||
=========
|
||||
|
||||
$ make am335x_shc_defconfig
|
||||
HOSTCC scripts/basic/fixdep
|
||||
HOSTCC scripts/kconfig/conf.o
|
||||
SHIPPED scripts/kconfig/zconf.tab.c
|
||||
SHIPPED scripts/kconfig/zconf.lex.c
|
||||
SHIPPED scripts/kconfig/zconf.hash.c
|
||||
HOSTCC scripts/kconfig/zconf.tab.o
|
||||
HOSTLD scripts/kconfig/conf
|
||||
#
|
||||
# configuration written to .config
|
||||
#
|
||||
$ make -s all
|
||||
|
||||
-> now you have the MLO and the u-boot.img file, you can put
|
||||
on your SD card or eMMC.
|
||||
|
||||
Configuring
|
||||
===========
|
||||
|
||||
There are a lot of board versions and boot configurations, which
|
||||
can be selected through "make menuconfig"
|
||||
|
||||
ARM architecture --->
|
||||
enable different boot versions for the shc board (enable eMMC) --->
|
||||
(X) enable eMMC
|
||||
( ) enable ICT
|
||||
( ) enable NETBOOT
|
||||
( ) enable SDBOOT
|
||||
|
||||
enable different board versions for the shc board (C3 Sample board version) --->
|
||||
( ) B Sample board version
|
||||
( ) B2 Sample board version
|
||||
( ) C Sample board version
|
||||
( ) C2 Sample board version
|
||||
(X) C3 Sample board version
|
||||
( ) Series board version
|
||||
|
||||
Netboot
|
||||
=======
|
||||
- see also doc/SPL/README.am335x-network
|
||||
|
||||
- set the jumper into netboot mode
|
||||
- compile the U-boot sources with:
|
||||
make am335x_shc_netboot_defconfig
|
||||
make all
|
||||
- copy the images into your tftp boot directory
|
||||
cp spl/u-boot-spl.bin /tftpboot/.../u-boot-spl-restore.bin
|
||||
cp u-boot.img /tftpboot/.../u-boot-restore.img
|
||||
- power on the board, and you should get something like this:
|
||||
|
||||
U-Boot SPL 2016.05-rc2-00016-gf23b960-dirty (Apr 26 2016 - 09:02:18)
|
||||
#### NETBOOT ####
|
||||
SHC
|
||||
MPU reference clock runs at 6 MHz
|
||||
Setting MPU clock to 594 MHz
|
||||
Enabling Spread Spectrum of 18 permille for MPU
|
||||
Trying to boot from net
|
||||
Using default environment
|
||||
|
||||
<ethaddr> not set. Validating first E-fuse MAC
|
||||
cpsw
|
||||
cpsw Waiting for PHY auto negotiation to complete... done
|
||||
link up on port 0, speed 100, full duplex
|
||||
BOOTP broadcast 1
|
||||
BOOTP broadcast 2
|
||||
DHCP client bound to address 192.168.20.91 (258 ms)
|
||||
Using cpsw device
|
||||
TFTP from server 192.168.1.1; our IP address is 192.168.20.91
|
||||
Filename 'shc/u-boot-restore.img'.
|
||||
Load address: 0x807fffc0
|
||||
Loading: ##################
|
||||
1.2 MiB/s
|
||||
done
|
||||
Bytes transferred = 262480 (40150 hex)
|
||||
|
||||
|
||||
U-Boot 2016.05-rc2-00016-gf23b960-dirty (Apr 26 2016 - 09:02:18 +0200)
|
||||
|
||||
Watchdog enabled
|
||||
I2C: ready
|
||||
DRAM: 512 MiB
|
||||
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
|
||||
*** Warning - bad CRC, using default environment
|
||||
|
||||
Net: cpsw
|
||||
switch to partitions #0, OK
|
||||
Reference in New Issue
Block a user