GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)
This commit is contained in:
@@ -0,0 +1,14 @@
|
||||
if TARGET_IMX8QXP_MEK
|
||||
|
||||
config SYS_BOARD
|
||||
default "imx8qxp_mek"
|
||||
|
||||
config SYS_VENDOR
|
||||
default "freescale"
|
||||
|
||||
config SYS_CONFIG_NAME
|
||||
default "imx8qxp_mek"
|
||||
|
||||
source "board/freescale/common/Kconfig"
|
||||
|
||||
endif
|
||||
@@ -0,0 +1,6 @@
|
||||
i.MX8QXP MEK BOARD
|
||||
M: Peng Fan <peng.fan@nxp.com>
|
||||
S: Maintained
|
||||
F: board/freescale/imx8qxp_mek/
|
||||
F: include/configs/imx8qxp_mek.h
|
||||
F: configs/imx8qxp_mek_defconfig
|
||||
@@ -0,0 +1,8 @@
|
||||
#
|
||||
# Copyright 2017 NXP
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y += imx8qxp_mek.o
|
||||
obj-$(CONFIG_SPL_BUILD) += spl.o
|
||||
@@ -0,0 +1,54 @@
|
||||
U-Boot for the NXP i.MX8QXP EVK board
|
||||
|
||||
Quick Start
|
||||
===========
|
||||
|
||||
- Build the ARM Trusted firmware binary
|
||||
- Get scfw_tcm.bin and ahab-container.img
|
||||
- Build U-Boot
|
||||
- Flash the binary into the SD card
|
||||
- Boot
|
||||
|
||||
Get and Build the ARM Trusted firmware
|
||||
======================================
|
||||
|
||||
$ git clone https://source.codeaurora.org/external/imx/imx-atf
|
||||
$ cd imx-atf/
|
||||
$ git checkout origin/imx_4.9.88_imx8qxp_beta2 -b imx_4.9.88_imx8qxp_beta2
|
||||
$ make PLAT=imx8qxp bl31
|
||||
|
||||
Get scfw_tcm.bin and ahab-container.img
|
||||
==============================
|
||||
|
||||
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-sc-firmware-0.7.bin
|
||||
$ chmod +x imx-sc-firmware-0.7.bin
|
||||
$ ./imx-sc-firmware-0.7.bin
|
||||
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.6.bin
|
||||
$ chmod +x firmware-imx-7.6.bin
|
||||
$ ./firmware-imx-7.6.bin
|
||||
|
||||
Copy the following binaries to U-Boot folder:
|
||||
|
||||
$ cp imx-atf/build/imx8qxp/release/bl31.bin .
|
||||
$ cp u-boot/u-boot.bin .
|
||||
|
||||
Copy the following firmwares U-Boot folder :
|
||||
|
||||
$ cp firmware-imx-7.6/firmware/seco/ahab-container.img .
|
||||
$ cp imx-sc-firmware-0.7/mx8qx-mek-scfw-tcm.bin .
|
||||
|
||||
Build U-Boot
|
||||
============
|
||||
$ make imx8qxp_mek_defconfig
|
||||
$ make flash.bin
|
||||
|
||||
Flash the binary into the SD card
|
||||
=================================
|
||||
|
||||
Burn the flash.bin binary to SD card offset 32KB:
|
||||
|
||||
$ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32
|
||||
|
||||
Boot
|
||||
====
|
||||
Set Boot switch SW2: 1100.
|
||||
@@ -0,0 +1,148 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Copyright 2018 NXP
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <env.h>
|
||||
#include <errno.h>
|
||||
#include <init.h>
|
||||
#include <linux/libfdt.h>
|
||||
#include <fsl_esdhc_imx.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/gpio.h>
|
||||
#include <asm/arch/clock.h>
|
||||
#include <asm/arch/sci/sci.h>
|
||||
#include <asm/arch/imx8-pins.h>
|
||||
#include <asm/arch/iomux.h>
|
||||
#include <asm/arch/sys_proto.h>
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
#define GPIO_PAD_CTRL ((SC_PAD_CONFIG_NORMAL << PADRING_CONFIG_SHIFT) | \
|
||||
(SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \
|
||||
(SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \
|
||||
(SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT))
|
||||
|
||||
#define UART_PAD_CTRL ((SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | \
|
||||
(SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \
|
||||
(SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \
|
||||
(SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT))
|
||||
|
||||
static iomux_cfg_t uart0_pads[] = {
|
||||
SC_P_UART0_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
|
||||
SC_P_UART0_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
|
||||
};
|
||||
|
||||
static void setup_iomux_uart(void)
|
||||
{
|
||||
imx8_iomux_setup_multiple_pads(uart0_pads, ARRAY_SIZE(uart0_pads));
|
||||
}
|
||||
|
||||
int board_early_init_f(void)
|
||||
{
|
||||
sc_pm_clock_rate_t rate = SC_80MHZ;
|
||||
int ret;
|
||||
|
||||
/* Set UART0 clock root to 80 MHz */
|
||||
ret = sc_pm_setup_uart(SC_R_UART_0, rate);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
setup_iomux_uart();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#if IS_ENABLED(CONFIG_DM_GPIO)
|
||||
static void board_gpio_init(void)
|
||||
{
|
||||
struct gpio_desc desc;
|
||||
int ret;
|
||||
|
||||
ret = dm_gpio_lookup_name("gpio@1a_3", &desc);
|
||||
if (ret)
|
||||
return;
|
||||
|
||||
ret = dm_gpio_request(&desc, "bb_per_rst_b");
|
||||
if (ret)
|
||||
return;
|
||||
|
||||
dm_gpio_set_dir_flags(&desc, GPIOD_IS_OUT);
|
||||
dm_gpio_set_value(&desc, 0);
|
||||
udelay(50);
|
||||
dm_gpio_set_value(&desc, 1);
|
||||
}
|
||||
#else
|
||||
static inline void board_gpio_init(void) {}
|
||||
#endif
|
||||
|
||||
#if IS_ENABLED(CONFIG_FEC_MXC)
|
||||
#include <miiphy.h>
|
||||
|
||||
int board_phy_config(struct phy_device *phydev)
|
||||
{
|
||||
phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f);
|
||||
phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8);
|
||||
|
||||
phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
|
||||
phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
|
||||
|
||||
if (phydev->drv->config)
|
||||
phydev->drv->config(phydev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
int checkboard(void)
|
||||
{
|
||||
puts("Board: iMX8QXP MEK\n");
|
||||
|
||||
build_info();
|
||||
print_bootinfo();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
board_gpio_init();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void detail_board_ddr_info(void)
|
||||
{
|
||||
puts("\nDDR ");
|
||||
}
|
||||
|
||||
/*
|
||||
* Board specific reset that is system reset.
|
||||
*/
|
||||
void reset_cpu(ulong addr)
|
||||
{
|
||||
/* TODO */
|
||||
}
|
||||
|
||||
#ifdef CONFIG_OF_BOARD_SETUP
|
||||
int ft_board_setup(void *blob, bd_t *bd)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
int board_mmc_get_env_dev(int devno)
|
||||
{
|
||||
return devno;
|
||||
}
|
||||
|
||||
int board_late_init(void)
|
||||
{
|
||||
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
|
||||
env_set("board_name", "MEK");
|
||||
env_set("board_rev", "iMX8QXP");
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
@@ -0,0 +1,22 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0+ */
|
||||
/*
|
||||
* Copyright 2018 NXP
|
||||
*
|
||||
* Refer doc/README.imx8image for more details about how-to configure
|
||||
* and create imx8image boot image
|
||||
*/
|
||||
|
||||
#define __ASSEMBLY__
|
||||
|
||||
/* Boot from SD, sector size 0x400 */
|
||||
BOOT_FROM SD 0x400
|
||||
/* SoC type IMX8QX */
|
||||
SOC_TYPE IMX8QX
|
||||
/* Append seco container image */
|
||||
APPEND ahab-container.img
|
||||
/* Create the 2nd container */
|
||||
CONTAINER
|
||||
/* Add scfw image with exec attribute */
|
||||
IMAGE SCU mx8qx-mek-scfw-tcm.bin
|
||||
/* Add ATF image with exec attribute */
|
||||
IMAGE A35 spl/u-boot-spl.bin 0x00100000
|
||||
@@ -0,0 +1,59 @@
|
||||
/*
|
||||
* Copyright 2018 NXP
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <dm.h>
|
||||
#include <spl.h>
|
||||
#include <dm/uclass.h>
|
||||
#include <dm/device.h>
|
||||
#include <dm/uclass-internal.h>
|
||||
#include <dm/device-internal.h>
|
||||
#include <dm/lists.h>
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
void spl_board_init(void)
|
||||
{
|
||||
struct udevice *dev;
|
||||
|
||||
uclass_find_first_device(UCLASS_MISC, &dev);
|
||||
|
||||
for (; dev; uclass_find_next_device(&dev)) {
|
||||
if (device_probe(dev))
|
||||
continue;
|
||||
}
|
||||
|
||||
arch_cpu_init();
|
||||
|
||||
board_early_init_f();
|
||||
|
||||
timer_init();
|
||||
|
||||
preloader_console_init();
|
||||
|
||||
puts("Normal Boot\n");
|
||||
}
|
||||
|
||||
#ifdef CONFIG_SPL_LOAD_FIT
|
||||
int board_fit_config_name_match(const char *name)
|
||||
{
|
||||
/* Just empty function now - can't decide what to choose */
|
||||
debug("%s: %s\n", __func__, name);
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
void board_init_f(ulong dummy)
|
||||
{
|
||||
/* Clear global data */
|
||||
memset((void *)gd, 0, sizeof(gd_t));
|
||||
|
||||
/* Clear the BSS. */
|
||||
memset(__bss_start, 0, __bss_end - __bss_start);
|
||||
|
||||
board_init_r(NULL, 0);
|
||||
}
|
||||
@@ -0,0 +1,13 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0+ */
|
||||
/*
|
||||
* Copyright 2019 NXP
|
||||
*/
|
||||
|
||||
#define __ASSEMBLY__
|
||||
|
||||
/* This file is to create a container image could be loaded by SPL */
|
||||
BOOT_FROM SD 0x400
|
||||
SOC_TYPE IMX8QX
|
||||
CONTAINER
|
||||
IMAGE A35 bl31.bin 0x80000000
|
||||
IMAGE A35 u-boot.bin CONFIG_SYS_TEXT_BASE
|
||||
Reference in New Issue
Block a user