GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)
This commit is contained in:
@@ -0,0 +1,320 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Copyright 2007,2009-2010 Freescale Semiconductor, Inc.
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <command.h>
|
||||
#include <init.h>
|
||||
#include <pci.h>
|
||||
#include <asm/processor.h>
|
||||
#include <asm/mmu.h>
|
||||
#include <asm/immap_85xx.h>
|
||||
#include <asm/fsl_pci.h>
|
||||
#include <fsl_ddr_sdram.h>
|
||||
#include <asm/fsl_serdes.h>
|
||||
#include <asm/io.h>
|
||||
#include <miiphy.h>
|
||||
#include <linux/libfdt.h>
|
||||
#include <fdt_support.h>
|
||||
#include <fsl_mdio.h>
|
||||
#include <tsec.h>
|
||||
#include <netdev.h>
|
||||
|
||||
#include "../common/sgmii_riser.h"
|
||||
|
||||
int checkboard (void)
|
||||
{
|
||||
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
||||
volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
|
||||
volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
|
||||
u8 vboot;
|
||||
u8 *pixis_base = (u8 *)PIXIS_BASE;
|
||||
|
||||
if ((uint)&gur->porpllsr != 0xe00e0000) {
|
||||
printf("immap size error %lx\n",(ulong)&gur->porpllsr);
|
||||
}
|
||||
printf ("Board: MPC8544DS, Sys ID: 0x%02x, "
|
||||
"Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
|
||||
in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER),
|
||||
in_8(pixis_base + PIXIS_PVER));
|
||||
|
||||
vboot = in_8(pixis_base + PIXIS_VBOOT);
|
||||
if (vboot & PIXIS_VBOOT_FMAP)
|
||||
printf ("vBank: %d\n", ((vboot & PIXIS_VBOOT_FBANK) >> 6));
|
||||
else
|
||||
puts ("Promjet\n");
|
||||
|
||||
lbc->ltesr = 0xffffffff; /* Clear LBC error interrupts */
|
||||
lbc->lteir = 0xffffffff; /* Enable LBC error interrupts */
|
||||
ecm->eedr = 0xffffffff; /* Clear ecm errors */
|
||||
ecm->eeer = 0xffffffff; /* Enable ecm errors */
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PCI1
|
||||
static struct pci_controller pci1_hose;
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_PCIE3
|
||||
static struct pci_controller pcie3_hose;
|
||||
#endif
|
||||
|
||||
void pci_init_board(void)
|
||||
{
|
||||
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
||||
struct fsl_pci_info pci_info;
|
||||
u32 devdisr, pordevsr, io_sel;
|
||||
u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel;
|
||||
int first_free_busno = 0;
|
||||
|
||||
int pcie_ep, pcie_configured;
|
||||
|
||||
devdisr = in_be32(&gur->devdisr);
|
||||
pordevsr = in_be32(&gur->pordevsr);
|
||||
porpllsr = in_be32(&gur->porpllsr);
|
||||
io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
|
||||
|
||||
debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
|
||||
|
||||
puts("\n");
|
||||
|
||||
#ifdef CONFIG_PCIE3
|
||||
pcie_configured = is_serdes_configured(PCIE3);
|
||||
|
||||
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){
|
||||
/* contains both PCIE3 MEM & IO space */
|
||||
set_next_law(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_4M,
|
||||
LAW_TRGT_IF_PCIE_3);
|
||||
SET_STD_PCIE_INFO(pci_info, 3);
|
||||
pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info.regs);
|
||||
|
||||
/* outbound memory */
|
||||
pci_set_region(&pcie3_hose.regions[0],
|
||||
CONFIG_SYS_PCIE3_MEM_BUS2,
|
||||
CONFIG_SYS_PCIE3_MEM_PHYS2,
|
||||
CONFIG_SYS_PCIE3_MEM_SIZE2,
|
||||
PCI_REGION_MEM);
|
||||
|
||||
pcie3_hose.region_count = 1;
|
||||
|
||||
printf("PCIE3: connected to ULI as %s (base addr %lx)\n",
|
||||
pcie_ep ? "Endpoint" : "Root Complex",
|
||||
pci_info.regs);
|
||||
first_free_busno = fsl_pci_init_port(&pci_info,
|
||||
&pcie3_hose, first_free_busno);
|
||||
|
||||
/*
|
||||
* Activate ULI1575 legacy chip by performing a fake
|
||||
* memory access. Needed to make ULI RTC work.
|
||||
*/
|
||||
in_be32((u32 *)CONFIG_SYS_PCIE3_MEM_BUS);
|
||||
} else {
|
||||
printf("PCIE3: disabled\n");
|
||||
}
|
||||
puts("\n");
|
||||
#else
|
||||
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE3); /* disable */
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_PCIE1
|
||||
SET_STD_PCIE_INFO(pci_info, 1);
|
||||
first_free_busno = fsl_pcie_init_ctrl(first_free_busno, devdisr, PCIE1, &pci_info);
|
||||
#else
|
||||
setbits_be32(&gur->devdisr, _DEVDISR_PCIE1); /* disable */
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_PCIE2
|
||||
SET_STD_PCIE_INFO(pci_info, 2);
|
||||
first_free_busno = fsl_pcie_init_ctrl(first_free_busno, devdisr, PCIE2, &pci_info);
|
||||
#else
|
||||
setbits_be32(&gur->devdisr, _DEVDISR_PCIE2); /* disable */
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_PCI1
|
||||
pci_speed = 66666000;
|
||||
pci_32 = 1;
|
||||
pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
|
||||
pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
|
||||
|
||||
if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
|
||||
SET_STD_PCI_INFO(pci_info, 1);
|
||||
set_next_law(pci_info.mem_phys,
|
||||
law_size_bits(pci_info.mem_size), pci_info.law);
|
||||
set_next_law(pci_info.io_phys,
|
||||
law_size_bits(pci_info.io_size), pci_info.law);
|
||||
|
||||
pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs);
|
||||
printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
|
||||
(pci_32) ? 32 : 64,
|
||||
(pci_speed == 33333000) ? "33" :
|
||||
(pci_speed == 66666000) ? "66" : "unknown",
|
||||
pci_clk_sel ? "sync" : "async",
|
||||
pci_agent ? "agent" : "host",
|
||||
pci_arb ? "arbiter" : "external-arbiter",
|
||||
pci_info.regs);
|
||||
|
||||
first_free_busno = fsl_pci_init_port(&pci_info,
|
||||
&pci1_hose, first_free_busno);
|
||||
} else {
|
||||
printf("PCI: disabled\n");
|
||||
}
|
||||
|
||||
puts("\n");
|
||||
#else
|
||||
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
|
||||
#endif
|
||||
}
|
||||
|
||||
int last_stage_init(void)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
unsigned long
|
||||
get_board_sys_clk(ulong dummy)
|
||||
{
|
||||
u8 i, go_bit, rd_clks;
|
||||
ulong val = 0;
|
||||
u8 *pixis_base = (u8 *)PIXIS_BASE;
|
||||
|
||||
go_bit = in_8(pixis_base + PIXIS_VCTL);
|
||||
go_bit &= 0x01;
|
||||
|
||||
rd_clks = in_8(pixis_base + PIXIS_VCFGEN0);
|
||||
rd_clks &= 0x1C;
|
||||
|
||||
/*
|
||||
* Only if both go bit and the SCLK bit in VCFGEN0 are set
|
||||
* should we be using the AUX register. Remember, we also set the
|
||||
* GO bit to boot from the alternate bank on the on-board flash
|
||||
*/
|
||||
|
||||
if (go_bit) {
|
||||
if (rd_clks == 0x1c)
|
||||
i = in_8(pixis_base + PIXIS_AUX);
|
||||
else
|
||||
i = in_8(pixis_base + PIXIS_SPD);
|
||||
} else {
|
||||
i = in_8(pixis_base + PIXIS_SPD);
|
||||
}
|
||||
|
||||
i &= 0x07;
|
||||
|
||||
switch (i) {
|
||||
case 0:
|
||||
val = 33333333;
|
||||
break;
|
||||
case 1:
|
||||
val = 40000000;
|
||||
break;
|
||||
case 2:
|
||||
val = 50000000;
|
||||
break;
|
||||
case 3:
|
||||
val = 66666666;
|
||||
break;
|
||||
case 4:
|
||||
val = 83000000;
|
||||
break;
|
||||
case 5:
|
||||
val = 100000000;
|
||||
break;
|
||||
case 6:
|
||||
val = 133333333;
|
||||
break;
|
||||
case 7:
|
||||
val = 166666666;
|
||||
break;
|
||||
}
|
||||
|
||||
return val;
|
||||
}
|
||||
|
||||
|
||||
#define MIIM_CIS8204_SLED_CON 0x1b
|
||||
#define MIIM_CIS8204_SLEDCON_INIT 0x1115
|
||||
/*
|
||||
* Hack to write all 4 PHYs with the LED values
|
||||
*/
|
||||
int board_phy_config(struct phy_device *phydev)
|
||||
{
|
||||
static int do_once;
|
||||
uint phyid;
|
||||
struct mii_dev *bus = phydev->bus;
|
||||
|
||||
if (phydev->drv->config)
|
||||
phydev->drv->config(phydev);
|
||||
if (do_once)
|
||||
return 0;
|
||||
|
||||
for (phyid = 0; phyid < 4; phyid++)
|
||||
bus->write(bus, phyid, MDIO_DEVAD_NONE, MIIM_CIS8204_SLED_CON,
|
||||
MIIM_CIS8204_SLEDCON_INIT);
|
||||
|
||||
do_once = 1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
int board_eth_init(bd_t *bis)
|
||||
{
|
||||
#ifdef CONFIG_TSEC_ENET
|
||||
struct fsl_pq_mdio_info mdio_info;
|
||||
struct tsec_info_struct tsec_info[2];
|
||||
int num = 0;
|
||||
|
||||
#ifdef CONFIG_TSEC1
|
||||
SET_STD_TSEC_INFO(tsec_info[num], 1);
|
||||
if (is_serdes_configured(SGMII_TSEC1)) {
|
||||
puts("eTSEC1 is in sgmii mode.\n");
|
||||
tsec_info[num].flags |= TSEC_SGMII;
|
||||
}
|
||||
num++;
|
||||
#endif
|
||||
#ifdef CONFIG_TSEC3
|
||||
SET_STD_TSEC_INFO(tsec_info[num], 3);
|
||||
if (is_serdes_configured(SGMII_TSEC3)) {
|
||||
puts("eTSEC3 is in sgmii mode.\n");
|
||||
tsec_info[num].flags |= TSEC_SGMII;
|
||||
}
|
||||
num++;
|
||||
#endif
|
||||
|
||||
if (!num) {
|
||||
printf("No TSECs initialized\n");
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
if (is_serdes_configured(SGMII_TSEC1) ||
|
||||
is_serdes_configured(SGMII_TSEC3)) {
|
||||
fsl_sgmii_riser_init(tsec_info, num);
|
||||
}
|
||||
|
||||
mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
|
||||
mdio_info.name = DEFAULT_MII_NAME;
|
||||
fsl_pq_mdio_init(bis, &mdio_info);
|
||||
|
||||
tsec_eth_init(bis, tsec_info, num);
|
||||
#endif
|
||||
return pci_eth_init(bis);
|
||||
}
|
||||
|
||||
#if defined(CONFIG_OF_BOARD_SETUP)
|
||||
int ft_board_setup(void *blob, bd_t *bd)
|
||||
{
|
||||
ft_cpu_setup(blob, bd);
|
||||
|
||||
FT_FSL_PCI_SETUP;
|
||||
|
||||
#ifdef CONFIG_FSL_SGMII_RISER
|
||||
fsl_sgmii_riser_fdt_fixup(blob);
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
Reference in New Issue
Block a user