GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)
This commit is contained in:
@@ -0,0 +1,270 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* (C) Copyright 2013
|
||||
* Gumstix Inc. <www.gumstix.com>
|
||||
* Maintainer: Ash Charles <ash@gumstix.com>
|
||||
*/
|
||||
#include <common.h>
|
||||
#include <netdev.h>
|
||||
#include <asm/arch/sys_proto.h>
|
||||
#include <asm/arch/mmc_host_def.h>
|
||||
#include <twl6030.h>
|
||||
#include <asm/emif.h>
|
||||
#include <asm/arch/clock.h>
|
||||
#include <asm/arch/gpio.h>
|
||||
#include <asm/gpio.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include "duovero_mux_data.h"
|
||||
|
||||
#define WIFI_EN 43
|
||||
|
||||
#if defined(CONFIG_CMD_NET)
|
||||
#define SMSC_NRESET 45
|
||||
static void setup_net_chip(void);
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_USB_EHCI_HCD
|
||||
#include <usb.h>
|
||||
#include <asm/arch/ehci.h>
|
||||
#include <asm/ehci-omap.h>
|
||||
#endif
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
const struct omap_sysinfo sysinfo = {
|
||||
"Board: duovero\n"
|
||||
};
|
||||
|
||||
struct omap4_scrm_regs *const scrm = (struct omap4_scrm_regs *)0x4a30a000;
|
||||
|
||||
/**
|
||||
* @brief board_init
|
||||
*
|
||||
* @return 0
|
||||
*/
|
||||
int board_init(void)
|
||||
{
|
||||
gpmc_init();
|
||||
|
||||
gd->bd->bi_arch_number = MACH_TYPE_DUOVERO;
|
||||
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief misc_init_r - Configure board specific configurations
|
||||
* such as power configurations, ethernet initialization as phase2 of
|
||||
* boot sequence
|
||||
*
|
||||
* @return 0
|
||||
*/
|
||||
int misc_init_r(void)
|
||||
{
|
||||
int ret = 0;
|
||||
u8 val;
|
||||
|
||||
/* wifi setup: first enable 32Khz clock from 6030 pmic */
|
||||
val = 0xe1;
|
||||
ret = i2c_write(TWL6030_CHIP_PM, 0xbe, 1, &val, 1);
|
||||
if (ret)
|
||||
printf("Failed to enable 32Khz clock to wifi module\n");
|
||||
|
||||
/* then setup WIFI_EN as an output pin and send reset pulse */
|
||||
if (!gpio_request(WIFI_EN, "")) {
|
||||
gpio_direction_output(WIFI_EN, 0);
|
||||
gpio_set_value(WIFI_EN, 1);
|
||||
udelay(1);
|
||||
gpio_set_value(WIFI_EN, 0);
|
||||
udelay(1);
|
||||
gpio_set_value(WIFI_EN, 1);
|
||||
}
|
||||
|
||||
#if defined(CONFIG_CMD_NET)
|
||||
setup_net_chip();
|
||||
#endif
|
||||
return 0;
|
||||
}
|
||||
|
||||
void set_muxconf_regs(void)
|
||||
{
|
||||
do_set_mux((*ctrl)->control_padconf_core_base,
|
||||
core_padconf_array_essential,
|
||||
sizeof(core_padconf_array_essential) /
|
||||
sizeof(struct pad_conf_entry));
|
||||
|
||||
do_set_mux((*ctrl)->control_padconf_wkup_base,
|
||||
wkup_padconf_array_essential,
|
||||
sizeof(wkup_padconf_array_essential) /
|
||||
sizeof(struct pad_conf_entry));
|
||||
|
||||
do_set_mux((*ctrl)->control_padconf_core_base,
|
||||
core_padconf_array_non_essential,
|
||||
sizeof(core_padconf_array_non_essential) /
|
||||
sizeof(struct pad_conf_entry));
|
||||
|
||||
do_set_mux((*ctrl)->control_padconf_wkup_base,
|
||||
wkup_padconf_array_non_essential,
|
||||
sizeof(wkup_padconf_array_non_essential) /
|
||||
sizeof(struct pad_conf_entry));
|
||||
}
|
||||
|
||||
#if defined(CONFIG_MMC)
|
||||
int board_mmc_init(bd_t *bis)
|
||||
{
|
||||
return omap_mmc_init(0, 0, 0, -1, -1);
|
||||
}
|
||||
|
||||
#if !defined(CONFIG_SPL_BUILD)
|
||||
void board_mmc_power_init(void)
|
||||
{
|
||||
twl6030_power_mmc_init(0);
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_CMD_NET)
|
||||
|
||||
#define GPMC_SIZE_16M 0xF
|
||||
#define GPMC_BASEADDR_MASK 0x3F
|
||||
#define GPMC_CS_ENABLE 0x1
|
||||
|
||||
static void enable_gpmc_net_config(const u32 *gpmc_config, const struct gpmc_cs *cs,
|
||||
u32 base, u32 size)
|
||||
{
|
||||
writel(0, &cs->config7);
|
||||
sdelay(1000);
|
||||
/* Delay for settling */
|
||||
writel(gpmc_config[0], &cs->config1);
|
||||
writel(gpmc_config[1], &cs->config2);
|
||||
writel(gpmc_config[2], &cs->config3);
|
||||
writel(gpmc_config[3], &cs->config4);
|
||||
writel(gpmc_config[4], &cs->config5);
|
||||
writel(gpmc_config[5], &cs->config6);
|
||||
|
||||
/*
|
||||
* Enable the config. size is the CS size and goes in
|
||||
* bits 11:8. We set bit 6 to enable this CS and the base
|
||||
* address goes into bits 5:0.
|
||||
*/
|
||||
writel((size << 8) | (GPMC_CS_ENABLE << 6) |
|
||||
((base >> 24) & GPMC_BASEADDR_MASK),
|
||||
&cs->config7);
|
||||
|
||||
sdelay(2000);
|
||||
}
|
||||
|
||||
/* GPMC CS configuration for an SMSC LAN9221 ethernet controller */
|
||||
#define NET_LAN9221_GPMC_CONFIG1 0x2a001203
|
||||
#define NET_LAN9221_GPMC_CONFIG2 0x000a0a02
|
||||
#define NET_LAN9221_GPMC_CONFIG3 0x00020200
|
||||
#define NET_LAN9221_GPMC_CONFIG4 0x0a030a03
|
||||
#define NET_LAN9221_GPMC_CONFIG5 0x000a0a0a
|
||||
#define NET_LAN9221_GPMC_CONFIG6 0x8a070707
|
||||
#define NET_LAN9221_GPMC_CONFIG7 0x00000f6c
|
||||
|
||||
/* GPMC definitions for LAN9221 chips on expansion boards */
|
||||
static const u32 gpmc_lan_config[] = {
|
||||
NET_LAN9221_GPMC_CONFIG1,
|
||||
NET_LAN9221_GPMC_CONFIG2,
|
||||
NET_LAN9221_GPMC_CONFIG3,
|
||||
NET_LAN9221_GPMC_CONFIG4,
|
||||
NET_LAN9221_GPMC_CONFIG5,
|
||||
NET_LAN9221_GPMC_CONFIG6,
|
||||
/*CONFIG7- computed as params */
|
||||
};
|
||||
|
||||
/*
|
||||
* Routine: setup_net_chip
|
||||
* Description: Setting up the configuration GPMC registers specific to the
|
||||
* Ethernet hardware.
|
||||
*/
|
||||
static void setup_net_chip(void)
|
||||
{
|
||||
enable_gpmc_net_config(gpmc_lan_config, &gpmc_cfg->cs[5], 0x2C000000,
|
||||
GPMC_SIZE_16M);
|
||||
|
||||
/* Make GPIO SMSC_NRESET as output pin and send reset pulse */
|
||||
if (!gpio_request(SMSC_NRESET, "")) {
|
||||
gpio_direction_output(SMSC_NRESET, 0);
|
||||
gpio_set_value(SMSC_NRESET, 1);
|
||||
udelay(1);
|
||||
gpio_set_value(SMSC_NRESET, 0);
|
||||
udelay(1);
|
||||
gpio_set_value(SMSC_NRESET, 1);
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
int board_eth_init(bd_t *bis)
|
||||
{
|
||||
int rc = 0;
|
||||
#ifdef CONFIG_SMC911X
|
||||
rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
|
||||
#endif
|
||||
return rc;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_USB_EHCI_HCD
|
||||
|
||||
static struct omap_usbhs_board_data usbhs_bdata = {
|
||||
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
|
||||
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
|
||||
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
|
||||
};
|
||||
|
||||
int ehci_hcd_init(int index, enum usb_init_type init,
|
||||
struct ehci_hccr **hccr, struct ehci_hcor **hcor)
|
||||
{
|
||||
int ret;
|
||||
unsigned int utmi_clk;
|
||||
u32 auxclk, altclksrc;
|
||||
|
||||
/* Now we can enable our port clocks */
|
||||
utmi_clk = readl((void *)CM_L3INIT_HSUSBHOST_CLKCTRL);
|
||||
utmi_clk |= HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK;
|
||||
setbits_le32((void *)CM_L3INIT_HSUSBHOST_CLKCTRL, utmi_clk);
|
||||
|
||||
auxclk = readl(&scrm->auxclk3);
|
||||
/* Select sys_clk */
|
||||
auxclk &= ~AUXCLK_SRCSELECT_MASK;
|
||||
auxclk |= AUXCLK_SRCSELECT_SYS_CLK << AUXCLK_SRCSELECT_SHIFT;
|
||||
/* Set the divisor to 2 */
|
||||
auxclk &= ~AUXCLK_CLKDIV_MASK;
|
||||
auxclk |= AUXCLK_CLKDIV_2 << AUXCLK_CLKDIV_SHIFT;
|
||||
/* Request auxilary clock #3 */
|
||||
auxclk |= AUXCLK_ENABLE_MASK;
|
||||
writel(auxclk, &scrm->auxclk3);
|
||||
|
||||
altclksrc = readl(&scrm->altclksrc);
|
||||
|
||||
/* Activate alternate system clock supplier */
|
||||
altclksrc &= ~ALTCLKSRC_MODE_MASK;
|
||||
altclksrc |= ALTCLKSRC_MODE_ACTIVE;
|
||||
|
||||
/* enable clocks */
|
||||
altclksrc |= ALTCLKSRC_ENABLE_INT_MASK | ALTCLKSRC_ENABLE_EXT_MASK;
|
||||
|
||||
writel(altclksrc, &scrm->altclksrc);
|
||||
|
||||
ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int ehci_hcd_stop(int index)
|
||||
{
|
||||
return omap_ehci_hcd_stop();
|
||||
}
|
||||
#endif
|
||||
|
||||
/*
|
||||
* get_board_rev() - get board revision
|
||||
*/
|
||||
u32 get_board_rev(void)
|
||||
{
|
||||
return 0x20;
|
||||
}
|
||||
Reference in New Issue
Block a user