GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)

source/bootloader/u-boot-2020.01/board/imgtec/xilfpga/Kconfig

@@ -0,0 +1,15 @@
+if TARGET_XILFPGA
+
+config SYS_BOARD
+	default "xilfpga"
+
+config SYS_VENDOR
+	default "imgtec"
+
+config SYS_CONFIG_NAME
+	default "imgtec_xilfpga"
+
+config SYS_TEXT_BASE
+	default 0x80C00000
+
+endif

source/bootloader/u-boot-2020.01/board/imgtec/xilfpga/MAINTAINERS

@@ -0,0 +1,6 @@
+XILFPGA BOARD
+M:	Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
+S:	Maintained
+F:	board/imgtec/xilfpga
+F:	include/configs/xilfpga.h
+F:	configs/imgtec_xilfpga_defconfig

source/bootloader/u-boot-2020.01/board/imgtec/xilfpga/Makefile

@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2016, Imagination Technologies Ltd.
+# Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+obj-y := xilfpga.o

source/bootloader/u-boot-2020.01/board/imgtec/xilfpga/README

@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2016, Imagination Technologies Ltd.
+ *
+ * Zubair Lutfullah Kakakhel, Zubair.Kakakhel@imgtec.com
+ */
+
+MIPSfpga
+=======================================
+
+MIPSfpga is an FPGA based development platform by Imagination Technologies
+As we are dealing with a MIPS core instantiated on an FPGA, specifications
+are fluid and can be varied in RTL.
+
+The example project provided by IMGTEC runs on the Nexys4DDR board by
+Digilent powered by the ARTIX-7 FPGA by Xilinx. Relevant details about
+the example project and the Nexys4DDR board:
+
+- microAptiv UP core m14Kc
+- 50MHz clock speed
+- 128Mbyte DDR RAM	at 0x0000_0000
+- 8Kbyte RAM		at 0x1000_0000
+- axi_intc		at 0x1020_0000
+- axi_uart16550		at 0x1040_0000
+- axi_gpio		at 0x1060_0000
+- axi_i2c		at 0x10A0_0000
+- custom_gpio		at 0x10C0_0000
+- axi_ethernetlite	at 0x10E0_0000
+- 8Kbyte BootRAM	at 0x1FC0_0000
+- 16Mbyte QPI		at 0x1D00_0000
+
+Boot protocol:
+--------------
+
+The BootRAM is a writeable "RAM" in FPGA at 0x1FC0_0000.
+This is for easy reprogrammibility via JTAG.
+
+DDR initialization is already handled by a HW IP block.
+
+When the example project bitstream is loaded, the cpu_reset button
+needs to be pressed.
+
+The bootram initializes the cache and axi_uart
+Then checks if there is anything non 0xffff_ffff at location 0x1D40_0000
+
+If there is, then that is considered as u-boot. u-boot is copied from
+0x1D40_0000 to memory and the bootram jumps into u-boot code.
+
+At this point, the board is ready to load the Linux kernel + buildroot initramfs
+
+This can be done in multiple ways:
+
+1- JTAG load the binary and jump into it.
+2- Load kernel stored in the QSPI flash at 0x1D80_0000
+3- Load uImage via tftp. Ethernet works in u-boot.
+   e.g. env set server ip 192.168.154.45; dhcp uImage; bootm

source/bootloader/u-boot-2020.01/board/imgtec/xilfpga/xilfpga.c

@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Imagination Technologies MIPSfpga platform code
+ *
+ * Copyright (C) 2016, Imagination Technologies Ltd.
+ *
+ * Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
+ *
+ */
+
+#include <common.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* initialize the DDR Controller and PHY */
+int dram_init(void)
+{
+	/* MIG IP block is smart and doesn't need SW
+	 * to do any init */
+	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;	/* in bytes */
+
+	return 0;
+}