GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)

source/bootloader/u-boot-2020.01/board/renesas/grpeach/lowlevel_init.S

@@ -0,0 +1,107 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017 Renesas Electronics
+ * Copyright (C) 2017 Chris Brandt
+ */
+#include <config.h>
+#include <version.h>
+#include <asm/macro.h>
+
+/* Watchdog Registers */
+#define RZA1_WDT_BASE	0xFCFE0000
+#define WTCSR	(RZA1_WDT_BASE + 0x00) /* Watchdog Timer Control Register */
+#define WTCNT	(RZA1_WDT_BASE + 0x02) /* Watchdog Timer Counter Register */
+#define WRCSR	(RZA1_WDT_BASE + 0x04) /* Watchdog Reset Control Register */
+
+/* Standby controller registers (chapter 55) */
+#define RZA1_STBCR_BASE	0xFCFE0020
+#define STBCR1	(RZA1_STBCR_BASE + 0x00)
+#define STBCR2	(RZA1_STBCR_BASE + 0x04)
+#define STBCR3	(RZA1_STBCR_BASE + 0x400)
+#define STBCR4	(RZA1_STBCR_BASE + 0x404)
+#define STBCR5	(RZA1_STBCR_BASE + 0x408)
+#define STBCR6	(RZA1_STBCR_BASE + 0x40c)
+#define STBCR7	(RZA1_STBCR_BASE + 0x410)
+#define STBCR8	(RZA1_STBCR_BASE + 0x414)
+#define STBCR9	(RZA1_STBCR_BASE + 0x418)
+#define STBCR10	(RZA1_STBCR_BASE + 0x41c)
+#define STBCR11	(RZA1_STBCR_BASE + 0x420)
+#define STBCR12	(RZA1_STBCR_BASE + 0x424)
+#define STBCR13	(RZA1_STBCR_BASE + 0x450)
+
+/* Clock Registers */
+#define RZA1_FRQCR_BASE	0xFCFE0010
+#define FRQCR	(RZA1_FRQCR_BASE + 0x00)
+#define FRQCR2	(RZA1_FRQCR_BASE + 0x04)
+
+#define SYSCR1	0xFCFE0400 /* System control register 1 */
+#define SYSCR2	0xFCFE0404 /* System control register 2 */
+#define SYSCR3	0xFCFE0408 /* System control register 3 */
+
+/* Disable WDT */
+#define WTCSR_D		0xA518
+#define WTCNT_D		0x5A00
+
+/* Enable all peripheral clocks */
+#define STBCR3_D	0x00000000
+#define STBCR4_D	0x00000000
+#define STBCR5_D	0x00000000
+#define STBCR6_D	0x00000000
+#define STBCR7_D	0x00000024
+#define STBCR8_D	0x00000005
+#define STBCR9_D	0x00000000
+#define STBCR10_D	0x00000000
+#define STBCR11_D	0x000000c0
+#define STBCR12_D	0x000000f0
+
+/*
+ * Set all system clocks to full speed.
+ * On reset, the CPU will be running at 1/2 speed.
+ * In the Hardware Manual, see Table 6.3 Settable Frequency Ranges
+ */
+#define FRQCR_D		0x0035
+#define FRQCR2_D	0x0001
+
+	.global	lowlevel_init
+
+	.text
+	.align	2
+
+lowlevel_init:
+	/* PL310 init */
+	write32 0x3fffff80, 0x00000001
+
+	/* Disable WDT */
+	write16	WTCSR, WTCSR_D
+	write16	WTCNT, WTCNT_D
+
+	/* Set clocks */
+	write16	FRQCR, FRQCR_D
+	write16	FRQCR2, FRQCR2_D
+
+	/* Enable all peripherals(Standby Control) */
+	write8 STBCR3, STBCR3_D
+	write8 STBCR4, STBCR4_D
+	write8 STBCR5, STBCR5_D
+	write8 STBCR6, STBCR6_D
+	write8 STBCR7, STBCR7_D
+	write8 STBCR8, STBCR8_D
+	write8 STBCR9, STBCR9_D
+	write8 STBCR10, STBCR10_D
+	write8 STBCR11, STBCR11_D
+	write8 STBCR12, STBCR12_D
+
+	/* For serial booting, enable read ahead caching to speed things up */
+#define DRCR_0  0x3FEFA00C
+	write32 DRCR_0, 0x00010100	/* Read Burst ON, Length=2 */
+
+	/* Enable all internal RAM */
+	write8 SYSCR1, 0xFF
+	write8 SYSCR2, 0xFF
+	write8 SYSCR3, 0xFF
+
+	nop
+	/* back to arch calling code */
+	mov	pc, lr
+
+	.align 4