GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)

source/bootloader/u-boot-2020.01/board/sysam/amcore/Kconfig

@@ -0,0 +1,22 @@
+if TARGET_AMCORE
+
+config SYS_CPU
+        string
+        default "mcf530x"
+
+config SYS_BOARD
+        string
+        default "amcore"
+
+config SYS_VENDOR
+        string
+        default "sysam"
+
+config SYS_CONFIG_NAME
+        string
+        default "amcore"
+
+endif
+
+
+

source/bootloader/u-boot-2020.01/board/sysam/amcore/MAINTAINERS

@@ -0,0 +1,6 @@
+AMCORE BOARD
+M:	Angelo Dureghello <angelo@sysam.it>
+S:	Maintained
+F:	board/sysam/amcore/
+F:	include/configs/amcore.h
+F:      configs/amcore_defconfig

source/bootloader/u-boot-2020.01/board/sysam/amcore/Makefile

@@ -0,0 +1,7 @@
+#
+# (C) Copyright 2014  Angelo Dureghello <angelo@sysam.it>
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+obj-y	= amcore.o

source/bootloader/u-boot-2020.01/board/sysam/amcore/amcore.c

@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Board functions for Sysam AMCORE (MCF5307 based) board
+ *
+ * (C) Copyright 2016  Angelo Dureghello <angelo@sysam.it>
+ *
+ * This file copies memory testdram() from sandburst/common/sb_common.c
+ */
+
+#include <common.h>
+#include <asm/immap.h>
+#include <asm/io.h>
+#include <dm.h>
+#include <dm/platform_data/serial_coldfire.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void init_lcd(void)
+{
+	/* setup for possible K0108 lcd connected on the parallel port */
+	sim_t *sim = (sim_t *)(MMAP_SIM);
+
+	out_be16(&sim->par, 0x300);
+
+	gpio_t *gpio = (gpio_t *)(MMAP_GPIO);
+
+	out_be16(&gpio->paddr, 0xfcff);
+	out_be16(&gpio->padat, 0x0c00);
+}
+
+int checkboard(void)
+{
+	puts("Board: ");
+	puts("AMCORE v.001(alpha)\n");
+
+	init_lcd();
+
+	return 0;
+}
+
+/*
+ * in dram_init we are here executing from flash
+ * case 1:
+ * is with no ACR/flash cache enabled
+ * nop = 40ns (scope measured)
+ */
+void fudelay(int usec)
+{
+	while (usec--)
+		asm volatile ("nop");
+}
+
+int dram_init(void)
+{
+	u32 dramsize, RC;
+
+	sdramctrl_t *dc = (sdramctrl_t *)(MMAP_DRAMC);
+
+	/*
+	 * SDRAM  MT48LC4M32B2 details
+	 * Memory block 0: 16 MB of SDRAM at address $00000000
+	 * Port size: 32-bit port
+	 *
+	 * Memory block 0 wired as follows:
+	 * CPU   : A15 A14 A13 A12 A11 A10 A9 A17 A18 A19 A20 A21 A22 A23
+	 * SDRAM :  A0  A1  A2  A3  A4  A5  A6 A7  A8  A9 A10 A11 BA0 BA1
+	 *
+	 * Ensure that there is a delay of at least 100 microseconds from
+	 * processor reset to the following code so that the SDRAM is ready
+	 * for commands.
+	 */
+	fudelay(100);
+
+	/*
+	 * DCR
+	 * set proper  RC as per specification
+	 */
+	RC = (CONFIG_SYS_CPU_CLK / 1000000) >> 1;
+	RC = (RC * 15) >> 4;
+
+	/* 0x8000 is the faster option */
+	out_be16(&dc->dcr, 0x8200 | RC);
+
+	/*
+	 * DACR0, page mode continuous, CMD on A20 0x0300
+	 */
+	out_be32(&dc->dacr0, 0x00003304);
+
+	dramsize = ((CONFIG_SYS_SDRAM_SIZE)-1) & 0xfffc0000;
+	out_be32(&dc->dmr0,  dramsize|1);
+
+	/* issue a PRECHARGE ALL */
+	out_be32(&dc->dacr0, 0x0000330c);
+	out_be32((u32 *)0x00000004, 0xbeaddeed);
+	/* issue AUTOREFRESH */
+	out_be32(&dc->dacr0, 0x0000b304);
+	/* let refresh occur */
+	fudelay(1);
+
+	out_be32(&dc->dacr0, 0x0000b344);
+	out_be32((u32 *)0x00000c00, 0xbeaddeed);
+
+	gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE,
+				    CONFIG_SYS_SDRAM_SIZE);
+
+	return 0;
+}
+
+static struct coldfire_serial_platdata mcf5307_serial_plat = {
+	.base = CONFIG_SYS_UART_BASE,
+	.port = 0,
+	.baudrate = CONFIG_BAUDRATE,
+};
+
+U_BOOT_DEVICE(coldfire_serial) = {
+	.name = "serial_coldfire",
+	.platdata = &mcf5307_serial_plat,
+};