GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)
This commit is contained in:
@@ -0,0 +1,267 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Copyright (C) 2014-2019, Toradex AG
|
||||
*/
|
||||
|
||||
/*
|
||||
* Helpers for Freescale PMIC PF0100
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <i2c.h>
|
||||
#include <asm/arch/imx-regs.h>
|
||||
#include <asm/arch/iomux.h>
|
||||
#include <asm/arch/mx6-pins.h>
|
||||
#include <asm/gpio.h>
|
||||
#include <asm/mach-imx/iomux-v3.h>
|
||||
|
||||
#include "pf0100_otp.inc"
|
||||
#include "pf0100.h"
|
||||
|
||||
/* define for PMIC register dump */
|
||||
/*#define DEBUG */
|
||||
|
||||
#define WARNBAR "@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@\n"
|
||||
|
||||
/* use GPIO: EXT_IO1 to switch on VPGM, ON: 1 */
|
||||
static __maybe_unused iomux_v3_cfg_t const pmic_prog_pads[] = {
|
||||
MX6_PAD_NANDF_D3__GPIO2_IO03 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||
# define PMIC_PROG_VOLTAGE IMX_GPIO_NR(2, 3)
|
||||
};
|
||||
|
||||
unsigned pmic_init(void)
|
||||
{
|
||||
int rc;
|
||||
struct udevice *dev = NULL;
|
||||
unsigned programmed = 0;
|
||||
uchar bus = 1;
|
||||
uchar devid, revid, val;
|
||||
|
||||
puts("PMIC: ");
|
||||
rc = i2c_get_chip_for_busnum(bus, PFUZE100_I2C_ADDR, 1, &dev);
|
||||
if (rc) {
|
||||
printf("failed to get device for PMIC at address 0x%x\n",
|
||||
PFUZE100_I2C_ADDR);
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* check for errors in PMIC fuses */
|
||||
if (dm_i2c_read(dev, PFUZE100_INTSTAT3, &val, 1) < 0) {
|
||||
puts("i2c pmic INTSTAT3 register read failed\n");
|
||||
return 0;
|
||||
}
|
||||
if (val & PFUZE100_BIT_OTP_ECCI) {
|
||||
puts("\n" WARNBAR);
|
||||
puts("WARNING: ecc errors found in pmic fuse banks\n");
|
||||
puts(WARNBAR);
|
||||
}
|
||||
if (dm_i2c_read(dev, PFUZE100_OTP_ECC_SE1, &val, 1) < 0) {
|
||||
puts("i2c pmic ECC_SE1 register read failed\n");
|
||||
return 0;
|
||||
}
|
||||
if (val & PFUZE100_BITS_ECC_SE1) {
|
||||
puts(WARNBAR);
|
||||
puts("WARNING: ecc has made bit corrections in banks 1 to 5\n");
|
||||
puts(WARNBAR);
|
||||
}
|
||||
if (dm_i2c_read(dev, PFUZE100_OTP_ECC_SE2, &val, 1) < 0) {
|
||||
puts("i2c pmic ECC_SE2 register read failed\n");
|
||||
return 0;
|
||||
}
|
||||
if (val & PFUZE100_BITS_ECC_SE2) {
|
||||
puts(WARNBAR);
|
||||
puts("WARNING: ecc has made bit corrections in banks 6 to 10\n"
|
||||
);
|
||||
puts(WARNBAR);
|
||||
}
|
||||
if (dm_i2c_read(dev, PFUZE100_OTP_ECC_DE1, &val, 1) < 0) {
|
||||
puts("i2c pmic ECC_DE register read failed\n");
|
||||
return 0;
|
||||
}
|
||||
if (val & PFUZE100_BITS_ECC_DE1) {
|
||||
puts(WARNBAR);
|
||||
puts("ERROR: banks 1 to 5 have uncorrectable bits\n");
|
||||
puts(WARNBAR);
|
||||
}
|
||||
if (dm_i2c_read(dev, PFUZE100_OTP_ECC_DE2, &val, 1) < 0) {
|
||||
puts("i2c pmic ECC_DE register read failed\n");
|
||||
return 0;
|
||||
}
|
||||
if (val & PFUZE100_BITS_ECC_DE2) {
|
||||
puts(WARNBAR);
|
||||
puts("ERROR: banks 6 to 10 have uncorrectable bits\n");
|
||||
puts(WARNBAR);
|
||||
}
|
||||
|
||||
/* get device ident */
|
||||
if (dm_i2c_read(dev, PFUZE100_DEVICEID, &devid, 1) < 0) {
|
||||
puts("i2c pmic devid read failed\n");
|
||||
return 0;
|
||||
}
|
||||
if (dm_i2c_read(dev, PFUZE100_REVID, &revid, 1) < 0) {
|
||||
puts("i2c pmic revid read failed\n");
|
||||
return 0;
|
||||
}
|
||||
printf("device id: 0x%.2x, revision id: 0x%.2x, ", devid, revid);
|
||||
|
||||
/* get device programmed state */
|
||||
val = PFUZE100_PAGE_REGISTER_PAGE1;
|
||||
if (dm_i2c_write(dev, PFUZE100_PAGE_REGISTER, &val, 1)) {
|
||||
puts("i2c write failed\n");
|
||||
return 0;
|
||||
}
|
||||
if (dm_i2c_read(dev, PFUZE100_FUSE_POR1, &val, 1) < 0) {
|
||||
puts("i2c fuse_por read failed\n");
|
||||
return 0;
|
||||
}
|
||||
if (val & PFUZE100_FUSE_POR_M)
|
||||
programmed++;
|
||||
|
||||
if (dm_i2c_read(dev, PFUZE100_FUSE_POR2, &val, 1) < 0) {
|
||||
puts("i2c fuse_por read failed\n");
|
||||
return programmed;
|
||||
}
|
||||
if (val & PFUZE100_FUSE_POR_M)
|
||||
programmed++;
|
||||
|
||||
if (dm_i2c_read(dev, PFUZE100_FUSE_POR3, &val, 1) < 0) {
|
||||
puts("i2c fuse_por read failed\n");
|
||||
return programmed;
|
||||
}
|
||||
if (val & PFUZE100_FUSE_POR_M)
|
||||
programmed++;
|
||||
|
||||
switch (programmed) {
|
||||
case 0:
|
||||
puts("not programmed\n");
|
||||
break;
|
||||
case 3:
|
||||
puts("programmed\n");
|
||||
break;
|
||||
default:
|
||||
puts("undefined programming state\n");
|
||||
break;
|
||||
}
|
||||
|
||||
#ifdef DEBUG
|
||||
{
|
||||
unsigned int i, j;
|
||||
|
||||
for (i = 0; i < 16; i++)
|
||||
printf("\t%x", i);
|
||||
for (j = 0; j < 0x80; ) {
|
||||
printf("\n%2x", j);
|
||||
for (i = 0; i < 16; i++) {
|
||||
dm_i2c_read(dev, j + i, &val, 1);
|
||||
printf("\t%2x", val);
|
||||
}
|
||||
j += 0x10;
|
||||
}
|
||||
printf("\nEXT Page 1");
|
||||
|
||||
val = PFUZE100_PAGE_REGISTER_PAGE1;
|
||||
if (dm_i2c_write(dev, PFUZE100_PAGE_REGISTER, &val, 1)) {
|
||||
puts("i2c write failed\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
for (j = 0x80; j < 0x100; ) {
|
||||
printf("\n%2x", j);
|
||||
for (i = 0; i < 16; i++) {
|
||||
dm_i2c_read(dev, j + i, &val, 1);
|
||||
printf("\t%2x", val);
|
||||
}
|
||||
j += 0x10;
|
||||
}
|
||||
printf("\nEXT Page 2");
|
||||
|
||||
val = PFUZE100_PAGE_REGISTER_PAGE2;
|
||||
if (dm_i2c_write(dev, PFUZE100_PAGE_REGISTER, &val, 1)) {
|
||||
puts("i2c write failed\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
for (j = 0x80; j < 0x100; ) {
|
||||
printf("\n%2x", j);
|
||||
for (i = 0; i < 16; i++) {
|
||||
dm_i2c_read(dev, j + i, &val, 1);
|
||||
printf("\t%2x", val);
|
||||
}
|
||||
j += 0x10;
|
||||
}
|
||||
printf("\n");
|
||||
}
|
||||
#endif /* DEBUG */
|
||||
|
||||
return programmed;
|
||||
}
|
||||
|
||||
#ifndef CONFIG_SPL_BUILD
|
||||
static int pf0100_prog(void)
|
||||
{
|
||||
int rc;
|
||||
struct udevice *dev = NULL;
|
||||
unsigned char bus = 1;
|
||||
unsigned char val;
|
||||
unsigned int i;
|
||||
|
||||
if (pmic_init() == 3) {
|
||||
puts("PMIC already programmed, exiting\n");
|
||||
return CMD_RET_FAILURE;
|
||||
}
|
||||
/* set up gpio to manipulate vprog, initially off */
|
||||
imx_iomux_v3_setup_multiple_pads(pmic_prog_pads,
|
||||
ARRAY_SIZE(pmic_prog_pads));
|
||||
gpio_direction_output(PMIC_PROG_VOLTAGE, 0);
|
||||
|
||||
rc = i2c_get_chip_for_busnum(bus, PFUZE100_I2C_ADDR, 1, &dev);
|
||||
if (rc) {
|
||||
printf("failed to get device for PMIC at address 0x%x\n",
|
||||
PFUZE100_I2C_ADDR);
|
||||
return CMD_RET_FAILURE;
|
||||
}
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(pmic_otp_prog); i++) {
|
||||
switch (pmic_otp_prog[i].cmd) {
|
||||
case pmic_i2c:
|
||||
val = (unsigned char) (pmic_otp_prog[i].value & 0xff);
|
||||
if (dm_i2c_write(dev, pmic_otp_prog[i].reg, &val, 1)) {
|
||||
printf("i2c write failed, reg 0x%2x, value 0x%2x\n",
|
||||
pmic_otp_prog[i].reg, val);
|
||||
return CMD_RET_FAILURE;
|
||||
}
|
||||
break;
|
||||
case pmic_delay:
|
||||
udelay(pmic_otp_prog[i].value * 1000);
|
||||
break;
|
||||
case pmic_vpgm:
|
||||
gpio_direction_output(PMIC_PROG_VOLTAGE,
|
||||
pmic_otp_prog[i].value);
|
||||
break;
|
||||
case pmic_pwr:
|
||||
/* TODO */
|
||||
break;
|
||||
}
|
||||
}
|
||||
return CMD_RET_SUCCESS;
|
||||
}
|
||||
|
||||
static int do_pf0100_prog(cmd_tbl_t *cmdtp, int flag, int argc,
|
||||
char * const argv[])
|
||||
{
|
||||
int ret;
|
||||
puts("Programming PMIC OTP...");
|
||||
ret = pf0100_prog();
|
||||
if (ret == CMD_RET_SUCCESS)
|
||||
puts("done.\n");
|
||||
else
|
||||
puts("failed.\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
U_BOOT_CMD(
|
||||
pf0100_otp_prog, 1, 0, do_pf0100_prog,
|
||||
"Program the OTP fuses on the PMIC PF0100",
|
||||
""
|
||||
);
|
||||
#endif /* CONFIG_SPL_BUILD */
|
||||
Reference in New Issue
Block a user