GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)

2026-09-06 03:52:57 +08:00
commit b1928b41c0
21813 changed files with 4413081 additions and 0 deletions
@@ -0,0 +1,59 @@
+Texas Instruments TI SCI Generic Power Domain
+=============================================
+
+Some TI SoCs contain a system controller (like the SYSFW, etc...) that is
+responsible for controlling the state of the IPs that are present.
+Communication between the host processor running an OS and the system
+controller happens through a protocol known as TI SCI [1].
+
+[1] http://processors.wiki.ti.com/index.php/TISCI
+
+PM Domain Node
+==============
+The PM domain node represents the global PM domain managed by the SYSFW. Because
+this relies on the TI SCI protocol to communicate with the SYSFW it must be a
+child of the sysfw node.
+
+Required Properties:
+--------------------
+- compatible: Must be "ti,sci-pm-domain"
+- #power-domain-cells: Can be one of the following:
+			1: Containing the device id of each node
+			2: First entry should be device id
+			   Second entry should be one of the floowing:
+			   TI_SCI_PD_EXCLUSIVE: To allow device to be
+						exclusively controlled by
+						the requesting hosts.
+			   TI_SCI_PD_SHARED: To allow device to be shared
+					     by multiple hosts.
+
+Example (AM65x):
+----------------
+	sysfw: sysfw {
+		compatible = "ti,am654-system-controller";
+		...
+		k3_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <1>;
+		};
+	};
+
+PM Domain Consumers
+===================
+Hardware blocks belonging to a PM domain should contain a "power-domains"
+property that is a phandle pointing to the corresponding PM domain node
+along with an index representing the device id to be passed to the PMMC
+for device control.
+
+Required Properties:
+--------------------
+- power-domains: phandle pointing to the corresponding PM domain node
+		 and an ID representing the device.
+
+Example (AM65x):
+----------------
+	uart2: serial@02800000 {
+		compatible = "ti,omap4-uart";
+		...
+		power-domains = <&k3_pds 0x3f>;
+	};