GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)

source/bootloader/u-boot-2020.01/doc/device-tree-bindings/timer/altera_timer.txt

@@ -0,0 +1,19 @@
+Altera Timer
+
+Required properties:
+
+- compatible : should be "altr,timer-1.0"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-parent: phandle of the interrupt controller
+- interrupts : Should contain the timer interrupt number
+- clock-frequency : The frequency of the clock that drives the counter, in Hz.
+
+Example:
+
+timer {
+	compatible = "altr,timer-1.0";
+	reg = <0x00400000 0x00000020>;
+	interrupt-parent = <&cpu>;
+	interrupts = <11>;
+	clock-frequency = <125000000>;
+};

source/bootloader/u-boot-2020.01/doc/device-tree-bindings/timer/arc_timer.txt

@@ -0,0 +1,24 @@
+ARC Timer
+
+Required properties:
+
+- compatible : should be "snps,arc-timer".
+- reg : Specifies timer ID, could be either 0 or 1.
+- clocks : Specifies clocks that drives the counter.
+
+Examples:
+
+timer@0 {
+	compatible = "snps,arc-timer";
+	clocks = <&core_clk>;
+	reg = <0>;
+};
+
+timer@1 {
+	compatible = "snps,arc-timer";
+	clocks = <&core_clk>;
+	reg = <1>;
+};
+
+NOTE: if you specify both timers, clocks always should be the same
+as each timer is driven by the same core clock.

source/bootloader/u-boot-2020.01/doc/device-tree-bindings/timer/atcpit100_timer.txt

@@ -0,0 +1,31 @@
+Andestech ATCPIT100 timer
+------------------------------------------------------------------
+ATCPIT100 is a generic IP block from Andes Technology, embedded in
+Andestech AE3XX, AE250 platforms and other designs.
+
+This timer is a set of compact multi-function timers, which can be
+used as pulse width modulators (PWM) as well as simple timers.
+
+It supports up to 4 PIT channels. Each PIT channel is a
+multi-function timer and provide the following usage scenarios:
+One 32-bit timer
+Two 16-bit timers
+Four 8-bit timers
+One 16-bit PWM
+One 16-bit timer and one 8-bit PWM
+Two 8-bit timer and one 8-bit PWM
+
+Required properties:
+- compatible	: Should be "andestech,atcpit100"
+- reg		: Address and length of the register set
+- interrupts	: Reference to the timer interrupt
+- clock-frequency : The rate in HZ in input of the Andestech ATCPIT100 timer
+
+Examples:
+
+timer0: timer@f0400000 {
+	compatible = "andestech,atcpit100";
+	reg = <0xf0400000 0x1000>;
+	interrupts = <2 4>;
+	clock-frequency = <30000000>;
+}:

source/bootloader/u-boot-2020.01/doc/device-tree-bindings/timer/fsl,mpc83xx-timer.txt

@@ -0,0 +1,21 @@
+MPC83xx timer devices
+
+MPC83xx SoCs offer a decrementer interrupt that can be used to implement delay
+functionality, and periodically triggered actions.
+
+Required properties:
+- compatible: must be "fsl,mpc83xx-timer"
+- clocks: must be a reference to the system's CSB (coherent system bus) clock,
+  provided by one of the "fsl,mpc83xx-clk" devices
+
+Example:
+
+socclocks: clocks {
+	compatible = "fsl,mpc832x-clk";
+	#clock-cells = <1>;
+};
+
+timer {
+	compatible = "fsl,mpc83xx-timer";
+	clocks = <&socclocks MPC83XX_CLK_CSB>;
+};

source/bootloader/u-boot-2020.01/doc/device-tree-bindings/timer/sandbox_timer.txt

@@ -0,0 +1,7 @@
+Sandbox timer
+
+The sandbox timer device is an emulated device which gets time from
+host os.
+
+Required properties:
+  compatible: "sandbox,timer"