GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)

source/bootloader/u-boot-2020.01/drivers/dfu/dfu_nand.c

@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dfu_nand.c -- DFU for NAND routines.
+ *
+ * Copyright (C) 2012-2013 Texas Instruments, Inc.
+ *
+ * Based on dfu_mmc.c which is:
+ * Copyright (C) 2012 Samsung Electronics
+ * author: Lukasz Majewski <l.majewski@samsung.com>
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <errno.h>
+#include <div64.h>
+#include <dfu.h>
+#include <linux/mtd/mtd.h>
+#include <jffs2/load_kernel.h>
+#include <nand.h>
+
+static int nand_block_op(enum dfu_op op, struct dfu_entity *dfu,
+			u64 offset, void *buf, long *len)
+{
+	loff_t start, lim;
+	size_t count, actual;
+	int ret;
+	struct mtd_info *mtd;
+
+	/* if buf == NULL return total size of the area */
+	if (buf == NULL) {
+		*len = dfu->data.nand.size;
+		return 0;
+	}
+
+	start = dfu->data.nand.start + offset + dfu->bad_skip;
+	lim = dfu->data.nand.start + dfu->data.nand.size - start;
+	count = *len;
+
+	mtd = get_nand_dev_by_index(nand_curr_device);
+
+	if (nand_curr_device < 0 ||
+	    nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
+	    !mtd) {
+		printf("%s: invalid nand device\n", __func__);
+		return -1;
+	}
+
+	if (op == DFU_OP_READ) {
+		ret = nand_read_skip_bad(mtd, start, &count, &actual,
+					 lim, buf);
+	} else {
+		nand_erase_options_t opts;
+
+		memset(&opts, 0, sizeof(opts));
+		opts.offset = start;
+		opts.length = count;
+		opts.spread = 1;
+		opts.quiet = 1;
+		opts.lim = lim;
+		/* first erase */
+		ret = nand_erase_opts(mtd, &opts);
+		if (ret)
+			return ret;
+		/* then write */
+		ret = nand_write_skip_bad(mtd, start, &count, &actual,
+					  lim, buf, WITH_WR_VERIFY);
+	}
+
+	if (ret != 0) {
+		printf("%s: nand_%s_skip_bad call failed at %llx!\n",
+		       __func__, op == DFU_OP_READ ? "read" : "write",
+		       start);
+		return ret;
+	}
+
+	/*
+	 * Find out where we stopped writing data.  This can be deeper into
+	 * the NAND than we expected due to having to skip bad blocks.  So
+	 * we must take this into account for the next write, if any.
+	 */
+	if (actual > count)
+		dfu->bad_skip += actual - count;
+
+	return ret;
+}
+
+static inline int nand_block_write(struct dfu_entity *dfu,
+		u64 offset, void *buf, long *len)
+{
+	return nand_block_op(DFU_OP_WRITE, dfu, offset, buf, len);
+}
+
+static inline int nand_block_read(struct dfu_entity *dfu,
+		u64 offset, void *buf, long *len)
+{
+	return nand_block_op(DFU_OP_READ, dfu, offset, buf, len);
+}
+
+static int dfu_write_medium_nand(struct dfu_entity *dfu,
+		u64 offset, void *buf, long *len)
+{
+	int ret = -1;
+
+	switch (dfu->layout) {
+	case DFU_RAW_ADDR:
+		ret = nand_block_write(dfu, offset, buf, len);
+		break;
+	default:
+		printf("%s: Layout (%s) not (yet) supported!\n", __func__,
+		       dfu_get_layout(dfu->layout));
+	}
+
+	return ret;
+}
+
+int dfu_get_medium_size_nand(struct dfu_entity *dfu, u64 *size)
+{
+	*size = dfu->data.nand.size;
+
+	return 0;
+}
+
+static int dfu_read_medium_nand(struct dfu_entity *dfu, u64 offset, void *buf,
+		long *len)
+{
+	int ret = -1;
+
+	switch (dfu->layout) {
+	case DFU_RAW_ADDR:
+		ret = nand_block_read(dfu, offset, buf, len);
+		break;
+	default:
+		printf("%s: Layout (%s) not (yet) supported!\n", __func__,
+		       dfu_get_layout(dfu->layout));
+	}
+
+	return ret;
+}
+
+static int dfu_flush_medium_nand(struct dfu_entity *dfu)
+{
+	int ret = 0;
+	u64 off;
+
+	/* in case of ubi partition, erase rest of the partition */
+	if (dfu->data.nand.ubi) {
+		struct mtd_info *mtd = get_nand_dev_by_index(nand_curr_device);
+		nand_erase_options_t opts;
+
+		if (nand_curr_device < 0 ||
+		    nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
+		    !mtd) {
+			printf("%s: invalid nand device\n", __func__);
+			return -1;
+		}
+
+		memset(&opts, 0, sizeof(opts));
+		off = dfu->offset;
+		if ((off & (mtd->erasesize - 1)) != 0) {
+			/*
+			 * last write ended with unaligned length
+			 * sector is erased, jump to next
+			 */
+			off = off & ~((mtd->erasesize - 1));
+			off += mtd->erasesize;
+		}
+		opts.offset = dfu->data.nand.start + off +
+				dfu->bad_skip;
+		opts.length = dfu->data.nand.start +
+				dfu->data.nand.size - opts.offset;
+		ret = nand_erase_opts(mtd, &opts);
+		if (ret != 0)
+			printf("Failure erase: %d\n", ret);
+	}
+
+	return ret;
+}
+
+unsigned int dfu_polltimeout_nand(struct dfu_entity *dfu)
+{
+	/*
+	 * Currently, Poll Timeout != 0 is only needed on nand
+	 * ubi partition, as the not used sectors need an erase
+	 */
+	if (dfu->data.nand.ubi)
+		return DFU_MANIFEST_POLL_TIMEOUT;
+
+	return DFU_DEFAULT_POLL_TIMEOUT;
+}
+
+int dfu_fill_entity_nand(struct dfu_entity *dfu, char *devstr, char *s)
+{
+	char *st;
+	int ret, dev, part;
+
+	dfu->data.nand.ubi = 0;
+	dfu->dev_type = DFU_DEV_NAND;
+	st = strsep(&s, " ");
+	if (!strcmp(st, "raw")) {
+		dfu->layout = DFU_RAW_ADDR;
+		dfu->data.nand.start = simple_strtoul(s, &s, 16);
+		s++;
+		dfu->data.nand.size = simple_strtoul(s, &s, 16);
+	} else if ((!strcmp(st, "part")) || (!strcmp(st, "partubi"))) {
+		char mtd_id[32];
+		struct mtd_device *mtd_dev;
+		u8 part_num;
+		struct part_info *pi;
+
+		dfu->layout = DFU_RAW_ADDR;
+
+		dev = simple_strtoul(s, &s, 10);
+		s++;
+		part = simple_strtoul(s, &s, 10);
+
+		sprintf(mtd_id, "%s%d,%d", "nand", dev, part - 1);
+		debug("using id '%s'\n", mtd_id);
+
+		mtdparts_init();
+
+		ret = find_dev_and_part(mtd_id, &mtd_dev, &part_num, &pi);
+		if (ret != 0) {
+			printf("Could not locate '%s'\n", mtd_id);
+			return -1;
+		}
+
+		dfu->data.nand.start = pi->offset;
+		dfu->data.nand.size = pi->size;
+		if (!strcmp(st, "partubi"))
+			dfu->data.nand.ubi = 1;
+	} else {
+		printf("%s: Memory layout (%s) not supported!\n", __func__, st);
+		return -1;
+	}
+
+	dfu->get_medium_size = dfu_get_medium_size_nand;
+	dfu->read_medium = dfu_read_medium_nand;
+	dfu->write_medium = dfu_write_medium_nand;
+	dfu->flush_medium = dfu_flush_medium_nand;
+	dfu->poll_timeout = dfu_polltimeout_nand;
+
+	/* initial state */
+	dfu->inited = 0;
+
+	return 0;
+}