GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)

source/bootloader/u-boot-2020.01/drivers/mtd/spi/fsl_espi_spl.c

@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <spi_flash.h>
+#include <malloc.h>
+
+#define ESPI_BOOT_IMAGE_SIZE	0x48
+#define ESPI_BOOT_IMAGE_ADDR	0x50
+#define CONFIG_CFG_DATA_SECTOR	0
+
+void fsl_spi_spl_load_image(uint32_t offs, unsigned int size, void *vdst)
+{
+	struct spi_flash *flash;
+
+	flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
+			CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
+	if (flash == NULL) {
+		puts("\nspi_flash_probe failed");
+		hang();
+	}
+
+	spi_flash_read(flash, offs, size, vdst);
+}
+
+/*
+ * The main entry for SPI booting. It's necessary that SDRAM is already
+ * configured and available since this code loads the main U-Boot image
+ * from SPI into SDRAM and starts it from there.
+ */
+void fsl_spi_boot(void)
+{
+	void (*uboot)(void) __noreturn;
+	u32 offset, code_len, copy_len = 0;
+#ifndef CONFIG_FSL_CORENET
+	unsigned char *buf = NULL;
+#endif
+	struct spi_flash *flash;
+
+	flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
+			CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
+	if (flash == NULL) {
+		puts("\nspi_flash_probe failed");
+		hang();
+	}
+
+#ifdef CONFIG_FSL_CORENET
+	offset = CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS;
+	code_len = CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE;
+#else
+	/*
+	* Load U-Boot image from SPI flash into RAM
+	*/
+	buf = malloc(flash->page_size);
+	if (buf == NULL) {
+		puts("\nmalloc failed");
+		hang();
+	}
+	memset(buf, 0, flash->page_size);
+
+	spi_flash_read(flash, CONFIG_CFG_DATA_SECTOR,
+		       flash->page_size, (void *)buf);
+	offset = *(u32 *)(buf + ESPI_BOOT_IMAGE_ADDR);
+	/* Skip spl code */
+	offset += CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS;
+	/* Get the code size from offset 0x48 */
+	code_len = *(u32 *)(buf + ESPI_BOOT_IMAGE_SIZE);
+	/* Skip spl code */
+	code_len = code_len - CONFIG_SPL_MAX_SIZE;
+#endif
+	/* copy code to DDR */
+	printf("Loading second stage boot loader ");
+	while (copy_len <= code_len) {
+		spi_flash_read(flash, offset + copy_len, 0x2000,
+			       (void *)(CONFIG_SYS_SPI_FLASH_U_BOOT_DST
+			       + copy_len));
+		copy_len = copy_len + 0x2000;
+		putc('.');
+	}
+
+	/*
+	* Jump to U-Boot image
+	*/
+	flush_cache(CONFIG_SYS_SPI_FLASH_U_BOOT_DST, code_len);
+	uboot = (void *)CONFIG_SYS_SPI_FLASH_U_BOOT_START;
+	(*uboot)();
+}