lai/gk-sdk
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)

Browse Source
This commit is contained in:
lai
2026-09-06 03:52:57 +08:00
commit b1928b41c0
21813 changed files with 4413081 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files
source/bootloader/u-boot-2020.01/drivers/mtd/ubi/Kconfig
+106
View File
@@ -0,0 +1,106 @@
menu "UBI support"
config UBI_SILENCE_MSG
bool "UBI silence verbose messages"
default ENV_IS_IN_UBI
help
Make the verbose messages from UBI stop printing. This leaves
warnings and errors enabled.
config MTD_UBI
bool "Enable UBI - Unsorted block images"
select RBTREE
select MTD_PARTITIONS
help
UBI is a software layer above MTD layer which admits of LVM-like
logical volumes on top of MTD devices, hides some complexities of
flash chips like wear and bad blocks and provides some other useful
capabilities. Please, consult the MTD web site for more details
(www.linux-mtd.infradead.org).
if MTD_UBI
config MTD_UBI_WL_THRESHOLD
int "UBI wear-leveling threshold"
default 4096
range 2 65536
help
This parameter defines the maximum difference between the highest
erase counter value and the lowest erase counter value of eraseblocks
of UBI devices. When this threshold is exceeded, UBI starts performing
wear leveling by means of moving data from eraseblock with low erase
counter to eraseblocks with high erase counter.
The default value should be OK for SLC NAND flashes, NOR flashes and
other flashes which have eraseblock life-cycle 100000 or more.
However, in case of MLC NAND flashes which typically have eraseblock
life-cycle less than 10000, the threshold should be lessened (e.g.,
to 128 or 256, although it does not have to be power of 2).
config MTD_UBI_BEB_LIMIT
int "Maximum expected bad eraseblock count per 1024 eraseblocks"
default 20
range 0 768
help
This option specifies the maximum bad physical eraseblocks UBI
expects on the MTD device (per 1024 eraseblocks). If the underlying
flash does not admit of bad eraseblocks (e.g. NOR flash), this value
is ignored.
NAND datasheets often specify the minimum and maximum NVM (Number of
Valid Blocks) for the flashes' endurance lifetime. The maximum
expected bad eraseblocks per 1024 eraseblocks then can be calculated
as "1024 * (1 - MinNVB / MaxNVB)", which gives 20 for most NANDs
(MaxNVB is basically the total count of eraseblocks on the chip).
To put it differently, if this value is 20, UBI will try to reserve
about 1.9% of physical eraseblocks for bad blocks handling. And that
will be 1.9% of eraseblocks on the entire NAND chip, not just the MTD
partition UBI attaches. This means that if you have, say, a NAND
flash chip admits maximum 40 bad eraseblocks, and it is split on two
MTD partitions of the same size, UBI will reserve 40 eraseblocks when
attaching a partition.
This option can be overridden by the "mtd=" UBI module parameter or
by the "attach" ioctl.
Leave the default value if unsure.
config MTD_UBI_FASTMAP
bool "UBI Fastmap (Experimental feature)"
default n
help
Important: this feature is experimental so far and the on-flash
format for fastmap may change in the next kernel versions
Fastmap is a mechanism which allows attaching an UBI device
in nearly constant time. Instead of scanning the whole MTD device it
only has to locate a checkpoint (called fastmap) on the device.
The on-flash fastmap contains all information needed to attach
the device. Using fastmap makes only sense on large devices where
attaching by scanning takes long. UBI will not automatically install
a fastmap on old images, but you can set the UBI module parameter
fm_autoconvert to 1 if you want so. Please note that fastmap-enabled
images are still usable with UBI implementations without
fastmap support. On typical flash devices the whole fastmap fits
into one PEB. UBI will reserve PEBs to hold two fastmaps.
If in doubt, say "N".
config MTD_UBI_FASTMAP_AUTOCONVERT
int "enable UBI Fastmap autoconvert"
depends on MTD_UBI_FASTMAP
default 0
help
Set this parameter to enable fastmap automatically on images
without a fastmap.
config MTD_UBI_FM_DEBUG
int "Enable UBI fastmap debug"
depends on MTD_UBI_FASTMAP
default 0
help
Enable UBI fastmap debug
endif # MTD_UBI
endmenu # "Enable UBI - Unsorted block images"
source/bootloader/u-boot-2020.01/drivers/mtd/ubi/Makefile
+9
View File
@@ -0,0 +1,9 @@
# SPDX-License-Identifier: GPL-2.0+
#
# (C) Copyright 2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
obj-y += attach.o build.o vtbl.o vmt.o upd.o kapi.o eba.o io.o wl.o crc32.o
obj-$(CONFIG_MTD_UBI_FASTMAP) += fastmap.o
obj-y += misc.o
obj-y += debug.o
source/bootloader/u-boot-2020.01/drivers/mtd/ubi/attach.c
+1763
View File
File diff suppressed because it is too large Load Diff
source/bootloader/u-boot-2020.01/drivers/mtd/ubi/build.c
+1552
View File
File diff suppressed because it is too large Load Diff
source/bootloader/u-boot-2020.01/drivers/mtd/ubi/crc32.c
+511
View File
@@ -0,0 +1,511 @@
/*
* Oct 15, 2000 Matt Domsch <Matt_Domsch@dell.com>
* Nicer crc32 functions/docs submitted by linux@horizon.com. Thanks!
* Code was from the public domain, copyright abandoned. Code was
* subsequently included in the kernel, thus was re-licensed under the
* GNU GPL v2.
*
* Oct 12, 2000 Matt Domsch <Matt_Domsch@dell.com>
* Same crc32 function was used in 5 other places in the kernel.
* I made one version, and deleted the others.
* There are various incantations of crc32(). Some use a seed of 0 or ~0.
* Some xor at the end with ~0. The generic crc32() function takes
* seed as an argument, and doesn't xor at the end. Then individual
* users can do whatever they need.
* drivers/net/smc9194.c uses seed ~0, doesn't xor with ~0.
* fs/jffs2 uses seed 0, doesn't xor with ~0.
* fs/partitions/efi.c uses seed ~0, xor's with ~0.
*
* This source code is licensed under the GNU General Public License,
* Version 2. See the file COPYING for more details.
*/
#ifndef __UBOOT__
#include <linux/crc32.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/compiler.h>
#include <u-boot/crc.h>
#endif
#include <linux/types.h>
#include <asm/byteorder.h>
#ifndef __UBOOT__
#include <linux/slab.h>
#include <linux/init.h>
#include <asm/atomic.h>
#endif
#include "crc32defs.h"
#define CRC_LE_BITS 8
#if CRC_LE_BITS == 8
#define tole(x) cpu_to_le32(x)
#define tobe(x) cpu_to_be32(x)
#else
#define tole(x) (x)
#define tobe(x) (x)
#endif
#include "crc32table.h"
#ifndef __UBOOT__
MODULE_AUTHOR("Matt Domsch <Matt_Domsch@dell.com>");
MODULE_DESCRIPTION("Ethernet CRC32 calculations");
MODULE_LICENSE("GPL");
#endif
/**
* crc32_le() - Calculate bitwise little-endian Ethernet AUTODIN II CRC32
* @crc: seed value for computation. ~0 for Ethernet, sometimes 0 for
* other uses, or the previous crc32 value if computing incrementally.
* @p: pointer to buffer over which CRC is run
* @len: length of buffer @p
*/
u32 crc32_le(u32 crc, unsigned char const *p, size_t len);
#if CRC_LE_BITS == 1
/*
* In fact, the table-based code will work in this case, but it can be
* simplified by inlining the table in ?: form.
*/
u32 crc32_le(u32 crc, unsigned char const *p, size_t len)
{
int i;
while (len--) {
crc ^= *p++;
for (i = 0; i < 8; i++)
crc = (crc >> 1) ^ ((crc & 1) ? CRCPOLY_LE : 0);
}
return crc;
}
#else /* Table-based approach */
u32 crc32_le(u32 crc, unsigned char const *p, size_t len)
{
# if CRC_LE_BITS == 8
const u32 *b =(u32 *)p;
const u32 *tab = crc32table_le;
# ifdef __LITTLE_ENDIAN
# define DO_CRC(x) crc = tab[ (crc ^ (x)) & 255 ] ^ (crc>>8)
# else
# define DO_CRC(x) crc = tab[ ((crc >> 24) ^ (x)) & 255] ^ (crc<<8)
# endif
/* printf("Crc32_le crc=%x\n",crc); */
crc = __cpu_to_le32(crc);
/* Align it */
if((((long)b)&3 && len)){
do {
u8 *p = (u8 *)b;
DO_CRC(*p++);
b = (void *)p;
} while ((--len) && ((long)b)&3 );
}
if((len >= 4)){
/* load data 32 bits wide, xor data 32 bits wide. */
size_t save_len = len & 3;
len = len >> 2;
--b; /* use pre increment below(*++b) for speed */
do {
crc ^= *++b;
DO_CRC(0);
DO_CRC(0);
DO_CRC(0);
DO_CRC(0);
} while (--len);
b++; /* point to next byte(s) */
len = save_len;
}
/* And the last few bytes */
if(len){
do {
u8 *p = (u8 *)b;
DO_CRC(*p++);
b = (void *)p;
} while (--len);
}
return __le32_to_cpu(crc);
#undef ENDIAN_SHIFT
#undef DO_CRC
# elif CRC_LE_BITS == 4
while (len--) {
crc ^= *p++;
crc = (crc >> 4) ^ crc32table_le[crc & 15];
crc = (crc >> 4) ^ crc32table_le[crc & 15];
}
return crc;
# elif CRC_LE_BITS == 2
while (len--) {
crc ^= *p++;
crc = (crc >> 2) ^ crc32table_le[crc & 3];
crc = (crc >> 2) ^ crc32table_le[crc & 3];
crc = (crc >> 2) ^ crc32table_le[crc & 3];
crc = (crc >> 2) ^ crc32table_le[crc & 3];
}
return crc;
# endif
}
#endif
#ifndef __UBOOT__
/**
* crc32_be() - Calculate bitwise big-endian Ethernet AUTODIN II CRC32
* @crc: seed value for computation. ~0 for Ethernet, sometimes 0 for
* other uses, or the previous crc32 value if computing incrementally.
* @p: pointer to buffer over which CRC is run
* @len: length of buffer @p
*/
u32 __attribute_pure__ crc32_be(u32 crc, unsigned char const *p, size_t len);
#if CRC_BE_BITS == 1
/*
* In fact, the table-based code will work in this case, but it can be
* simplified by inlining the table in ?: form.
*/
u32 __attribute_pure__ crc32_be(u32 crc, unsigned char const *p, size_t len)
{
int i;
while (len--) {
crc ^= *p++ << 24;
for (i = 0; i < 8; i++)
crc =
(crc << 1) ^ ((crc & 0x80000000) ? CRCPOLY_BE :
0);
}
return crc;
}
#else /* Table-based approach */
u32 __attribute_pure__ crc32_be(u32 crc, unsigned char const *p, size_t len)
{
# if CRC_BE_BITS == 8
const u32 *b =(u32 *)p;
const u32 *tab = crc32table_be;
# ifdef __LITTLE_ENDIAN
# define DO_CRC(x) crc = tab[ (crc ^ (x)) & 255 ] ^ (crc>>8)
# else
# define DO_CRC(x) crc = tab[ ((crc >> 24) ^ (x)) & 255] ^ (crc<<8)
# endif
crc = __cpu_to_be32(crc);
/* Align it */
if(unlikely(((long)b)&3 && len)){
do {
u8 *p = (u8 *)b;
DO_CRC(*p++);
b = (u32 *)p;
} while ((--len) && ((long)b)&3 );
}
if(likely(len >= 4)){
/* load data 32 bits wide, xor data 32 bits wide. */
size_t save_len = len & 3;
len = len >> 2;
--b; /* use pre increment below(*++b) for speed */
do {
crc ^= *++b;
DO_CRC(0);
DO_CRC(0);
DO_CRC(0);
DO_CRC(0);
} while (--len);
b++; /* point to next byte(s) */
len = save_len;
}
/* And the last few bytes */
if(len){
do {
u8 *p = (u8 *)b;
DO_CRC(*p++);
b = (void *)p;
} while (--len);
}
return __be32_to_cpu(crc);
#undef ENDIAN_SHIFT
#undef DO_CRC
# elif CRC_BE_BITS == 4
while (len--) {
crc ^= *p++ << 24;
crc = (crc << 4) ^ crc32table_be[crc >> 28];
crc = (crc << 4) ^ crc32table_be[crc >> 28];
}
return crc;
# elif CRC_BE_BITS == 2
while (len--) {
crc ^= *p++ << 24;
crc = (crc << 2) ^ crc32table_be[crc >> 30];
crc = (crc << 2) ^ crc32table_be[crc >> 30];
crc = (crc << 2) ^ crc32table_be[crc >> 30];
crc = (crc << 2) ^ crc32table_be[crc >> 30];
}
return crc;
# endif
}
#endif
EXPORT_SYMBOL(crc32_le);
EXPORT_SYMBOL(crc32_be);
#endif
/*
* A brief CRC tutorial.
*
* A CRC is a long-division remainder. You add the CRC to the message,
* and the whole thing (message+CRC) is a multiple of the given
* CRC polynomial. To check the CRC, you can either check that the
* CRC matches the recomputed value, *or* you can check that the
* remainder computed on the message+CRC is 0. This latter approach
* is used by a lot of hardware implementations, and is why so many
* protocols put the end-of-frame flag after the CRC.
*
* It's actually the same long division you learned in school, except that
* - We're working in binary, so the digits are only 0 and 1, and
* - When dividing polynomials, there are no carries. Rather than add and
* subtract, we just xor. Thus, we tend to get a bit sloppy about
* the difference between adding and subtracting.
*
* A 32-bit CRC polynomial is actually 33 bits long. But since it's
* 33 bits long, bit 32 is always going to be set, so usually the CRC
* is written in hex with the most significant bit omitted. (If you're
* familiar with the IEEE 754 floating-point format, it's the same idea.)
*
* Note that a CRC is computed over a string of *bits*, so you have
* to decide on the endianness of the bits within each byte. To get
* the best error-detecting properties, this should correspond to the
* order they're actually sent. For example, standard RS-232 serial is
* little-endian; the most significant bit (sometimes used for parity)
* is sent last. And when appending a CRC word to a message, you should
* do it in the right order, matching the endianness.
*
* Just like with ordinary division, the remainder is always smaller than
* the divisor (the CRC polynomial) you're dividing by. Each step of the
* division, you take one more digit (bit) of the dividend and append it
* to the current remainder. Then you figure out the appropriate multiple
* of the divisor to subtract to being the remainder back into range.
* In binary, it's easy - it has to be either 0 or 1, and to make the
* XOR cancel, it's just a copy of bit 32 of the remainder.
*
* When computing a CRC, we don't care about the quotient, so we can
* throw the quotient bit away, but subtract the appropriate multiple of
* the polynomial from the remainder and we're back to where we started,
* ready to process the next bit.
*
* A big-endian CRC written this way would be coded like:
* for (i = 0; i < input_bits; i++) {
* multiple = remainder & 0x80000000 ? CRCPOLY : 0;
* remainder = (remainder << 1 | next_input_bit()) ^ multiple;
* }
* Notice how, to get at bit 32 of the shifted remainder, we look
* at bit 31 of the remainder *before* shifting it.
*
* But also notice how the next_input_bit() bits we're shifting into
* the remainder don't actually affect any decision-making until
* 32 bits later. Thus, the first 32 cycles of this are pretty boring.
* Also, to add the CRC to a message, we need a 32-bit-long hole for it at
* the end, so we have to add 32 extra cycles shifting in zeros at the
* end of every message,
*
* So the standard trick is to rearrage merging in the next_input_bit()
* until the moment it's needed. Then the first 32 cycles can be precomputed,
* and merging in the final 32 zero bits to make room for the CRC can be
* skipped entirely.
* This changes the code to:
* for (i = 0; i < input_bits; i++) {
* remainder ^= next_input_bit() << 31;
* multiple = (remainder & 0x80000000) ? CRCPOLY : 0;
* remainder = (remainder << 1) ^ multiple;
* }
* With this optimization, the little-endian code is simpler:
* for (i = 0; i < input_bits; i++) {
* remainder ^= next_input_bit();
* multiple = (remainder & 1) ? CRCPOLY : 0;
* remainder = (remainder >> 1) ^ multiple;
* }
*
* Note that the other details of endianness have been hidden in CRCPOLY
* (which must be bit-reversed) and next_input_bit().
*
* However, as long as next_input_bit is returning the bits in a sensible
* order, we can actually do the merging 8 or more bits at a time rather
* than one bit at a time:
* for (i = 0; i < input_bytes; i++) {
* remainder ^= next_input_byte() << 24;
* for (j = 0; j < 8; j++) {
* multiple = (remainder & 0x80000000) ? CRCPOLY : 0;
* remainder = (remainder << 1) ^ multiple;
* }
* }
* Or in little-endian:
* for (i = 0; i < input_bytes; i++) {
* remainder ^= next_input_byte();
* for (j = 0; j < 8; j++) {
* multiple = (remainder & 1) ? CRCPOLY : 0;
* remainder = (remainder << 1) ^ multiple;
* }
* }
* If the input is a multiple of 32 bits, you can even XOR in a 32-bit
* word at a time and increase the inner loop count to 32.
*
* You can also mix and match the two loop styles, for example doing the
* bulk of a message byte-at-a-time and adding bit-at-a-time processing
* for any fractional bytes at the end.
*
* The only remaining optimization is to the byte-at-a-time table method.
* Here, rather than just shifting one bit of the remainder to decide
* in the correct multiple to subtract, we can shift a byte at a time.
* This produces a 40-bit (rather than a 33-bit) intermediate remainder,
* but again the multiple of the polynomial to subtract depends only on
* the high bits, the high 8 bits in this case.
*
* The multile we need in that case is the low 32 bits of a 40-bit
* value whose high 8 bits are given, and which is a multiple of the
* generator polynomial. This is simply the CRC-32 of the given
* one-byte message.
*
* Two more details: normally, appending zero bits to a message which
* is already a multiple of a polynomial produces a larger multiple of that
* polynomial. To enable a CRC to detect this condition, it's common to
* invert the CRC before appending it. This makes the remainder of the
* message+crc come out not as zero, but some fixed non-zero value.
*
* The same problem applies to zero bits prepended to the message, and
* a similar solution is used. Instead of starting with a remainder of
* 0, an initial remainder of all ones is used. As long as you start
* the same way on decoding, it doesn't make a difference.
*/
#ifdef UNITTEST
#include <stdlib.h>
#include <stdio.h>
#ifndef __UBOOT__
static void
buf_dump(char const *prefix, unsigned char const *buf, size_t len)
{
fputs(prefix, stdout);
while (len--)
printf(" %02x", *buf++);
putchar('\n');
}
#endif
static void bytereverse(unsigned char *buf, size_t len)
{
while (len--) {
unsigned char x = bitrev8(*buf);
*buf++ = x;
}
}
static void random_garbage(unsigned char *buf, size_t len)
{
while (len--)
*buf++ = (unsigned char) random();
}
#ifndef __UBOOT__
static void store_le(u32 x, unsigned char *buf)
{
buf[0] = (unsigned char) x;
buf[1] = (unsigned char) (x >> 8);
buf[2] = (unsigned char) (x >> 16);
buf[3] = (unsigned char) (x >> 24);
}
#endif
static void store_be(u32 x, unsigned char *buf)
{
buf[0] = (unsigned char) (x >> 24);
buf[1] = (unsigned char) (x >> 16);
buf[2] = (unsigned char) (x >> 8);
buf[3] = (unsigned char) x;
}
/*
* This checks that CRC(buf + CRC(buf)) = 0, and that
* CRC commutes with bit-reversal. This has the side effect
* of bytewise bit-reversing the input buffer, and returns
* the CRC of the reversed buffer.
*/
static u32 test_step(u32 init, unsigned char *buf, size_t len)
{
u32 crc1, crc2;
size_t i;
crc1 = crc32_be(init, buf, len);
store_be(crc1, buf + len);
crc2 = crc32_be(init, buf, len + 4);
if (crc2)
printf("\nCRC cancellation fail: 0x%08x should be 0\n",
crc2);
for (i = 0; i <= len + 4; i++) {
crc2 = crc32_be(init, buf, i);
crc2 = crc32_be(crc2, buf + i, len + 4 - i);
if (crc2)
printf("\nCRC split fail: 0x%08x\n", crc2);
}
/* Now swap it around for the other test */
bytereverse(buf, len + 4);
init = bitrev32(init);
crc2 = bitrev32(crc1);
if (crc1 != bitrev32(crc2))
printf("\nBit reversal fail: 0x%08x -> 0x%08x -> 0x%08x\n",
crc1, crc2, bitrev32(crc2));
crc1 = crc32_le(init, buf, len);
if (crc1 != crc2)
printf("\nCRC endianness fail: 0x%08x != 0x%08x\n", crc1,
crc2);
crc2 = crc32_le(init, buf, len + 4);
if (crc2)
printf("\nCRC cancellation fail: 0x%08x should be 0\n",
crc2);
for (i = 0; i <= len + 4; i++) {
crc2 = crc32_le(init, buf, i);
crc2 = crc32_le(crc2, buf + i, len + 4 - i);
if (crc2)
printf("\nCRC split fail: 0x%08x\n", crc2);
}
return crc1;
}
#define SIZE 64
#define INIT1 0
#define INIT2 0
int main(void)
{
unsigned char buf1[SIZE + 4];
unsigned char buf2[SIZE + 4];
unsigned char buf3[SIZE + 4];
int i, j;
u32 crc1, crc2, crc3;
for (i = 0; i <= SIZE; i++) {
printf("\rTesting length %d...", i);
fflush(stdout);
random_garbage(buf1, i);
random_garbage(buf2, i);
for (j = 0; j < i; j++)
buf3[j] = buf1[j] ^ buf2[j];
crc1 = test_step(INIT1, buf1, i);
crc2 = test_step(INIT2, buf2, i);
/* Now check that CRC(buf1 ^ buf2) = CRC(buf1) ^ CRC(buf2) */
crc3 = test_step(INIT1 ^ INIT2, buf3, i);
if (crc3 != (crc1 ^ crc2))
printf("CRC XOR fail: 0x%08x != 0x%08x ^ 0x%08x\n",
crc3, crc1, crc2);
}
printf("\nAll test complete. No failures expected.\n");
return 0;
}
#endif /* UNITTEST */
source/bootloader/u-boot-2020.01/drivers/mtd/ubi/crc32defs.h
+32
View File
@@ -0,0 +1,32 @@
/*
* There are multiple 16-bit CRC polynomials in common use, but this is
* *the* standard CRC-32 polynomial, first popularized by Ethernet.
* x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x^1+x^0
*/
#define CRCPOLY_LE 0xedb88320
#define CRCPOLY_BE 0x04c11db7
/* How many bits at a time to use. Requires a table of 4<<CRC_xx_BITS bytes. */
/* For less performance-sensitive, use 4 */
#ifndef CRC_LE_BITS
# define CRC_LE_BITS 8
#endif
#ifndef CRC_BE_BITS
# define CRC_BE_BITS 8
#endif
/*
* Little-endian CRC computation. Used with serial bit streams sent
* lsbit-first. Be sure to use cpu_to_le32() to append the computed CRC.
*/
#if CRC_LE_BITS > 8 || CRC_LE_BITS < 1 || CRC_LE_BITS & CRC_LE_BITS-1
# error CRC_LE_BITS must be a power of 2 between 1 and 8
#endif
/*
* Big-endian CRC computation. Used with serial bit streams sent
* msbit-first. Be sure to use cpu_to_be32() to append the computed CRC.
*/
#if CRC_BE_BITS > 8 || CRC_BE_BITS < 1 || CRC_BE_BITS & CRC_BE_BITS-1
# error CRC_BE_BITS must be a power of 2 between 1 and 8
#endif
source/bootloader/u-boot-2020.01/drivers/mtd/ubi/crc32table.h
+136
View File
@@ -0,0 +1,136 @@
/* this file is generated - do not edit */
static const u32 crc32table_le[] = {
tole(0x00000000L), tole(0x77073096L), tole(0xee0e612cL), tole(0x990951baL),
tole(0x076dc419L), tole(0x706af48fL), tole(0xe963a535L), tole(0x9e6495a3L),
tole(0x0edb8832L), tole(0x79dcb8a4L), tole(0xe0d5e91eL), tole(0x97d2d988L),
tole(0x09b64c2bL), tole(0x7eb17cbdL), tole(0xe7b82d07L), tole(0x90bf1d91L),
tole(0x1db71064L), tole(0x6ab020f2L), tole(0xf3b97148L), tole(0x84be41deL),
tole(0x1adad47dL), tole(0x6ddde4ebL), tole(0xf4d4b551L), tole(0x83d385c7L),
tole(0x136c9856L), tole(0x646ba8c0L), tole(0xfd62f97aL), tole(0x8a65c9ecL),
tole(0x14015c4fL), tole(0x63066cd9L), tole(0xfa0f3d63L), tole(0x8d080df5L),
tole(0x3b6e20c8L), tole(0x4c69105eL), tole(0xd56041e4L), tole(0xa2677172L),
tole(0x3c03e4d1L), tole(0x4b04d447L), tole(0xd20d85fdL), tole(0xa50ab56bL),
tole(0x35b5a8faL), tole(0x42b2986cL), tole(0xdbbbc9d6L), tole(0xacbcf940L),
tole(0x32d86ce3L), tole(0x45df5c75L), tole(0xdcd60dcfL), tole(0xabd13d59L),
tole(0x26d930acL), tole(0x51de003aL), tole(0xc8d75180L), tole(0xbfd06116L),
tole(0x21b4f4b5L), tole(0x56b3c423L), tole(0xcfba9599L), tole(0xb8bda50fL),
tole(0x2802b89eL), tole(0x5f058808L), tole(0xc60cd9b2L), tole(0xb10be924L),
tole(0x2f6f7c87L), tole(0x58684c11L), tole(0xc1611dabL), tole(0xb6662d3dL),
tole(0x76dc4190L), tole(0x01db7106L), tole(0x98d220bcL), tole(0xefd5102aL),
tole(0x71b18589L), tole(0x06b6b51fL), tole(0x9fbfe4a5L), tole(0xe8b8d433L),
tole(0x7807c9a2L), tole(0x0f00f934L), tole(0x9609a88eL), tole(0xe10e9818L),
tole(0x7f6a0dbbL), tole(0x086d3d2dL), tole(0x91646c97L), tole(0xe6635c01L),
tole(0x6b6b51f4L), tole(0x1c6c6162L), tole(0x856530d8L), tole(0xf262004eL),
tole(0x6c0695edL), tole(0x1b01a57bL), tole(0x8208f4c1L), tole(0xf50fc457L),
tole(0x65b0d9c6L), tole(0x12b7e950L), tole(0x8bbeb8eaL), tole(0xfcb9887cL),
tole(0x62dd1ddfL), tole(0x15da2d49L), tole(0x8cd37cf3L), tole(0xfbd44c65L),
tole(0x4db26158L), tole(0x3ab551ceL), tole(0xa3bc0074L), tole(0xd4bb30e2L),
tole(0x4adfa541L), tole(0x3dd895d7L), tole(0xa4d1c46dL), tole(0xd3d6f4fbL),
tole(0x4369e96aL), tole(0x346ed9fcL), tole(0xad678846L), tole(0xda60b8d0L),
tole(0x44042d73L), tole(0x33031de5L), tole(0xaa0a4c5fL), tole(0xdd0d7cc9L),
tole(0x5005713cL), tole(0x270241aaL), tole(0xbe0b1010L), tole(0xc90c2086L),
tole(0x5768b525L), tole(0x206f85b3L), tole(0xb966d409L), tole(0xce61e49fL),
tole(0x5edef90eL), tole(0x29d9c998L), tole(0xb0d09822L), tole(0xc7d7a8b4L),
tole(0x59b33d17L), tole(0x2eb40d81L), tole(0xb7bd5c3bL), tole(0xc0ba6cadL),
tole(0xedb88320L), tole(0x9abfb3b6L), tole(0x03b6e20cL), tole(0x74b1d29aL),
tole(0xead54739L), tole(0x9dd277afL), tole(0x04db2615L), tole(0x73dc1683L),
tole(0xe3630b12L), tole(0x94643b84L), tole(0x0d6d6a3eL), tole(0x7a6a5aa8L),
tole(0xe40ecf0bL), tole(0x9309ff9dL), tole(0x0a00ae27L), tole(0x7d079eb1L),
tole(0xf00f9344L), tole(0x8708a3d2L), tole(0x1e01f268L), tole(0x6906c2feL),
tole(0xf762575dL), tole(0x806567cbL), tole(0x196c3671L), tole(0x6e6b06e7L),
tole(0xfed41b76L), tole(0x89d32be0L), tole(0x10da7a5aL), tole(0x67dd4accL),
tole(0xf9b9df6fL), tole(0x8ebeeff9L), tole(0x17b7be43L), tole(0x60b08ed5L),
tole(0xd6d6a3e8L), tole(0xa1d1937eL), tole(0x38d8c2c4L), tole(0x4fdff252L),
tole(0xd1bb67f1L), tole(0xa6bc5767L), tole(0x3fb506ddL), tole(0x48b2364bL),
tole(0xd80d2bdaL), tole(0xaf0a1b4cL), tole(0x36034af6L), tole(0x41047a60L),
tole(0xdf60efc3L), tole(0xa867df55L), tole(0x316e8eefL), tole(0x4669be79L),
tole(0xcb61b38cL), tole(0xbc66831aL), tole(0x256fd2a0L), tole(0x5268e236L),
tole(0xcc0c7795L), tole(0xbb0b4703L), tole(0x220216b9L), tole(0x5505262fL),
tole(0xc5ba3bbeL), tole(0xb2bd0b28L), tole(0x2bb45a92L), tole(0x5cb36a04L),
tole(0xc2d7ffa7L), tole(0xb5d0cf31L), tole(0x2cd99e8bL), tole(0x5bdeae1dL),
tole(0x9b64c2b0L), tole(0xec63f226L), tole(0x756aa39cL), tole(0x026d930aL),
tole(0x9c0906a9L), tole(0xeb0e363fL), tole(0x72076785L), tole(0x05005713L),
tole(0x95bf4a82L), tole(0xe2b87a14L), tole(0x7bb12baeL), tole(0x0cb61b38L),
tole(0x92d28e9bL), tole(0xe5d5be0dL), tole(0x7cdcefb7L), tole(0x0bdbdf21L),
tole(0x86d3d2d4L), tole(0xf1d4e242L), tole(0x68ddb3f8L), tole(0x1fda836eL),
tole(0x81be16cdL), tole(0xf6b9265bL), tole(0x6fb077e1L), tole(0x18b74777L),
tole(0x88085ae6L), tole(0xff0f6a70L), tole(0x66063bcaL), tole(0x11010b5cL),
tole(0x8f659effL), tole(0xf862ae69L), tole(0x616bffd3L), tole(0x166ccf45L),
tole(0xa00ae278L), tole(0xd70dd2eeL), tole(0x4e048354L), tole(0x3903b3c2L),
tole(0xa7672661L), tole(0xd06016f7L), tole(0x4969474dL), tole(0x3e6e77dbL),
tole(0xaed16a4aL), tole(0xd9d65adcL), tole(0x40df0b66L), tole(0x37d83bf0L),
tole(0xa9bcae53L), tole(0xdebb9ec5L), tole(0x47b2cf7fL), tole(0x30b5ffe9L),
tole(0xbdbdf21cL), tole(0xcabac28aL), tole(0x53b39330L), tole(0x24b4a3a6L),
tole(0xbad03605L), tole(0xcdd70693L), tole(0x54de5729L), tole(0x23d967bfL),
tole(0xb3667a2eL), tole(0xc4614ab8L), tole(0x5d681b02L), tole(0x2a6f2b94L),
tole(0xb40bbe37L), tole(0xc30c8ea1L), tole(0x5a05df1bL), tole(0x2d02ef8dL)
};
#ifndef __UBOOT__
static const u32 crc32table_be[] = {
tobe(0x00000000L), tobe(0x04c11db7L), tobe(0x09823b6eL), tobe(0x0d4326d9L),
tobe(0x130476dcL), tobe(0x17c56b6bL), tobe(0x1a864db2L), tobe(0x1e475005L),
tobe(0x2608edb8L), tobe(0x22c9f00fL), tobe(0x2f8ad6d6L), tobe(0x2b4bcb61L),
tobe(0x350c9b64L), tobe(0x31cd86d3L), tobe(0x3c8ea00aL), tobe(0x384fbdbdL),
tobe(0x4c11db70L), tobe(0x48d0c6c7L), tobe(0x4593e01eL), tobe(0x4152fda9L),
tobe(0x5f15adacL), tobe(0x5bd4b01bL), tobe(0x569796c2L), tobe(0x52568b75L),
tobe(0x6a1936c8L), tobe(0x6ed82b7fL), tobe(0x639b0da6L), tobe(0x675a1011L),
tobe(0x791d4014L), tobe(0x7ddc5da3L), tobe(0x709f7b7aL), tobe(0x745e66cdL),
tobe(0x9823b6e0L), tobe(0x9ce2ab57L), tobe(0x91a18d8eL), tobe(0x95609039L),
tobe(0x8b27c03cL), tobe(0x8fe6dd8bL), tobe(0x82a5fb52L), tobe(0x8664e6e5L),
tobe(0xbe2b5b58L), tobe(0xbaea46efL), tobe(0xb7a96036L), tobe(0xb3687d81L),
tobe(0xad2f2d84L), tobe(0xa9ee3033L), tobe(0xa4ad16eaL), tobe(0xa06c0b5dL),
tobe(0xd4326d90L), tobe(0xd0f37027L), tobe(0xddb056feL), tobe(0xd9714b49L),
tobe(0xc7361b4cL), tobe(0xc3f706fbL), tobe(0xceb42022L), tobe(0xca753d95L),
tobe(0xf23a8028L), tobe(0xf6fb9d9fL), tobe(0xfbb8bb46L), tobe(0xff79a6f1L),
tobe(0xe13ef6f4L), tobe(0xe5ffeb43L), tobe(0xe8bccd9aL), tobe(0xec7dd02dL),
tobe(0x34867077L), tobe(0x30476dc0L), tobe(0x3d044b19L), tobe(0x39c556aeL),
tobe(0x278206abL), tobe(0x23431b1cL), tobe(0x2e003dc5L), tobe(0x2ac12072L),
tobe(0x128e9dcfL), tobe(0x164f8078L), tobe(0x1b0ca6a1L), tobe(0x1fcdbb16L),
tobe(0x018aeb13L), tobe(0x054bf6a4L), tobe(0x0808d07dL), tobe(0x0cc9cdcaL),
tobe(0x7897ab07L), tobe(0x7c56b6b0L), tobe(0x71159069L), tobe(0x75d48ddeL),
tobe(0x6b93dddbL), tobe(0x6f52c06cL), tobe(0x6211e6b5L), tobe(0x66d0fb02L),
tobe(0x5e9f46bfL), tobe(0x5a5e5b08L), tobe(0x571d7dd1L), tobe(0x53dc6066L),
tobe(0x4d9b3063L), tobe(0x495a2dd4L), tobe(0x44190b0dL), tobe(0x40d816baL),
tobe(0xaca5c697L), tobe(0xa864db20L), tobe(0xa527fdf9L), tobe(0xa1e6e04eL),
tobe(0xbfa1b04bL), tobe(0xbb60adfcL), tobe(0xb6238b25L), tobe(0xb2e29692L),
tobe(0x8aad2b2fL), tobe(0x8e6c3698L), tobe(0x832f1041L), tobe(0x87ee0df6L),
tobe(0x99a95df3L), tobe(0x9d684044L), tobe(0x902b669dL), tobe(0x94ea7b2aL),
tobe(0xe0b41de7L), tobe(0xe4750050L), tobe(0xe9362689L), tobe(0xedf73b3eL),
tobe(0xf3b06b3bL), tobe(0xf771768cL), tobe(0xfa325055L), tobe(0xfef34de2L),
tobe(0xc6bcf05fL), tobe(0xc27dede8L), tobe(0xcf3ecb31L), tobe(0xcbffd686L),
tobe(0xd5b88683L), tobe(0xd1799b34L), tobe(0xdc3abdedL), tobe(0xd8fba05aL),
tobe(0x690ce0eeL), tobe(0x6dcdfd59L), tobe(0x608edb80L), tobe(0x644fc637L),
tobe(0x7a089632L), tobe(0x7ec98b85L), tobe(0x738aad5cL), tobe(0x774bb0ebL),
tobe(0x4f040d56L), tobe(0x4bc510e1L), tobe(0x46863638L), tobe(0x42472b8fL),
tobe(0x5c007b8aL), tobe(0x58c1663dL), tobe(0x558240e4L), tobe(0x51435d53L),
tobe(0x251d3b9eL), tobe(0x21dc2629L), tobe(0x2c9f00f0L), tobe(0x285e1d47L),
tobe(0x36194d42L), tobe(0x32d850f5L), tobe(0x3f9b762cL), tobe(0x3b5a6b9bL),
tobe(0x0315d626L), tobe(0x07d4cb91L), tobe(0x0a97ed48L), tobe(0x0e56f0ffL),
tobe(0x1011a0faL), tobe(0x14d0bd4dL), tobe(0x19939b94L), tobe(0x1d528623L),
tobe(0xf12f560eL), tobe(0xf5ee4bb9L), tobe(0xf8ad6d60L), tobe(0xfc6c70d7L),
tobe(0xe22b20d2L), tobe(0xe6ea3d65L), tobe(0xeba91bbcL), tobe(0xef68060bL),
tobe(0xd727bbb6L), tobe(0xd3e6a601L), tobe(0xdea580d8L), tobe(0xda649d6fL),
tobe(0xc423cd6aL), tobe(0xc0e2d0ddL), tobe(0xcda1f604L), tobe(0xc960ebb3L),
tobe(0xbd3e8d7eL), tobe(0xb9ff90c9L), tobe(0xb4bcb610L), tobe(0xb07daba7L),
tobe(0xae3afba2L), tobe(0xaafbe615L), tobe(0xa7b8c0ccL), tobe(0xa379dd7bL),
tobe(0x9b3660c6L), tobe(0x9ff77d71L), tobe(0x92b45ba8L), tobe(0x9675461fL),
tobe(0x8832161aL), tobe(0x8cf30badL), tobe(0x81b02d74L), tobe(0x857130c3L),
tobe(0x5d8a9099L), tobe(0x594b8d2eL), tobe(0x5408abf7L), tobe(0x50c9b640L),
tobe(0x4e8ee645L), tobe(0x4a4ffbf2L), tobe(0x470cdd2bL), tobe(0x43cdc09cL),
tobe(0x7b827d21L), tobe(0x7f436096L), tobe(0x7200464fL), tobe(0x76c15bf8L),
tobe(0x68860bfdL), tobe(0x6c47164aL), tobe(0x61043093L), tobe(0x65c52d24L),
tobe(0x119b4be9L), tobe(0x155a565eL), tobe(0x18197087L), tobe(0x1cd86d30L),
tobe(0x029f3d35L), tobe(0x065e2082L), tobe(0x0b1d065bL), tobe(0x0fdc1becL),
tobe(0x3793a651L), tobe(0x3352bbe6L), tobe(0x3e119d3fL), tobe(0x3ad08088L),
tobe(0x2497d08dL), tobe(0x2056cd3aL), tobe(0x2d15ebe3L), tobe(0x29d4f654L),
tobe(0xc5a92679L), tobe(0xc1683bceL), tobe(0xcc2b1d17L), tobe(0xc8ea00a0L),
tobe(0xd6ad50a5L), tobe(0xd26c4d12L), tobe(0xdf2f6bcbL), tobe(0xdbee767cL),
tobe(0xe3a1cbc1L), tobe(0xe760d676L), tobe(0xea23f0afL), tobe(0xeee2ed18L),
tobe(0xf0a5bd1dL), tobe(0xf464a0aaL), tobe(0xf9278673L), tobe(0xfde69bc4L),
tobe(0x89b8fd09L), tobe(0x8d79e0beL), tobe(0x803ac667L), tobe(0x84fbdbd0L),
tobe(0x9abc8bd5L), tobe(0x9e7d9662L), tobe(0x933eb0bbL), tobe(0x97ffad0cL),
tobe(0xafb010b1L), tobe(0xab710d06L), tobe(0xa6322bdfL), tobe(0xa2f33668L),
tobe(0xbcb4666dL), tobe(0xb8757bdaL), tobe(0xb5365d03L), tobe(0xb1f740b4L)
};
#endif
source/bootloader/u-boot-2020.01/drivers/mtd/ubi/debug.c
+561
View File
@@ -0,0 +1,561 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) International Business Machines Corp., 2006
*
* Author: Artem Bityutskiy (Битюцкий Артём)
*/
#include <hexdump.h>
#include <ubi_uboot.h>
#include "ubi.h"
#ifndef __UBOOT__
#include <linux/debugfs.h>
#include <linux/uaccess.h>
#include <linux/module.h>
#endif
/**
* ubi_dump_flash - dump a region of flash.
* @ubi: UBI device description object
* @pnum: the physical eraseblock number to dump
* @offset: the starting offset within the physical eraseblock to dump
* @len: the length of the region to dump
*/
void ubi_dump_flash(struct ubi_device *ubi, int pnum, int offset, int len)
{
int err;
size_t read;
void *buf;
loff_t addr = (loff_t)pnum * ubi->peb_size + offset;
buf = vmalloc(len);
if (!buf)
return;
err = mtd_read(ubi->mtd, addr, len, &read, buf);
if (err && err != -EUCLEAN) {
ubi_err(ubi, "err %d while reading %d bytes from PEB %d:%d, read %zd bytes",
err, len, pnum, offset, read);
goto out;
}
ubi_msg(ubi, "dumping %d bytes of data from PEB %d, offset %d",
len, pnum, offset);
print_hex_dump("", DUMP_PREFIX_OFFSET, 32, 1, buf, len, 1);
out:
vfree(buf);
return;
}
/**
* ubi_dump_ec_hdr - dump an erase counter header.
* @ec_hdr: the erase counter header to dump
*/
void ubi_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr)
{
pr_err("Erase counter header dump:\n");
pr_err("\tmagic %#08x\n", be32_to_cpu(ec_hdr->magic));
pr_err("\tversion %d\n", (int)ec_hdr->version);
pr_err("\tec %llu\n", (long long)be64_to_cpu(ec_hdr->ec));
pr_err("\tvid_hdr_offset %d\n", be32_to_cpu(ec_hdr->vid_hdr_offset));
pr_err("\tdata_offset %d\n", be32_to_cpu(ec_hdr->data_offset));
pr_err("\timage_seq %d\n", be32_to_cpu(ec_hdr->image_seq));
pr_err("\thdr_crc %#08x\n", be32_to_cpu(ec_hdr->hdr_crc));
pr_err("erase counter header hexdump:\n");
print_hex_dump("", DUMP_PREFIX_OFFSET, 32, 1,
ec_hdr, UBI_EC_HDR_SIZE, 1);
}
/**
* ubi_dump_vid_hdr - dump a volume identifier header.
* @vid_hdr: the volume identifier header to dump
*/
void ubi_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr)
{
pr_err("Volume identifier header dump:\n");
pr_err("\tmagic %08x\n", be32_to_cpu(vid_hdr->magic));
pr_err("\tversion %d\n", (int)vid_hdr->version);
pr_err("\tvol_type %d\n", (int)vid_hdr->vol_type);
pr_err("\tcopy_flag %d\n", (int)vid_hdr->copy_flag);
pr_err("\tcompat %d\n", (int)vid_hdr->compat);
pr_err("\tvol_id %d\n", be32_to_cpu(vid_hdr->vol_id));
pr_err("\tlnum %d\n", be32_to_cpu(vid_hdr->lnum));
pr_err("\tdata_size %d\n", be32_to_cpu(vid_hdr->data_size));
pr_err("\tused_ebs %d\n", be32_to_cpu(vid_hdr->used_ebs));
pr_err("\tdata_pad %d\n", be32_to_cpu(vid_hdr->data_pad));
pr_err("\tsqnum %llu\n",
(unsigned long long)be64_to_cpu(vid_hdr->sqnum));
pr_err("\thdr_crc %08x\n", be32_to_cpu(vid_hdr->hdr_crc));
pr_err("Volume identifier header hexdump:\n");
print_hex_dump("", DUMP_PREFIX_OFFSET, 32, 1,
vid_hdr, UBI_VID_HDR_SIZE, 1);
}
/**
* ubi_dump_vol_info - dump volume information.
* @vol: UBI volume description object
*/
void ubi_dump_vol_info(const struct ubi_volume *vol)
{
printf("Volume information dump:\n");
printf("\tvol_id %d\n", vol->vol_id);
printf("\treserved_pebs %d\n", vol->reserved_pebs);
printf("\talignment %d\n", vol->alignment);
printf("\tdata_pad %d\n", vol->data_pad);
printf("\tvol_type %d\n", vol->vol_type);
printf("\tname_len %d\n", vol->name_len);
printf("\tusable_leb_size %d\n", vol->usable_leb_size);
printf("\tused_ebs %d\n", vol->used_ebs);
printf("\tused_bytes %lld\n", vol->used_bytes);
printf("\tlast_eb_bytes %d\n", vol->last_eb_bytes);
printf("\tcorrupted %d\n", vol->corrupted);
printf("\tupd_marker %d\n", vol->upd_marker);
printf("\tskip_check %d\n", vol->skip_check);
if (vol->name_len <= UBI_VOL_NAME_MAX &&
strnlen(vol->name, vol->name_len + 1) == vol->name_len) {
printf("\tname %s\n", vol->name);
} else {
printf("\t1st 5 characters of name: %c%c%c%c%c\n",
vol->name[0], vol->name[1], vol->name[2],
vol->name[3], vol->name[4]);
}
}
/**
* ubi_dump_vtbl_record - dump a &struct ubi_vtbl_record object.
* @r: the object to dump
* @idx: volume table index
*/
void ubi_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx)
{
int name_len = be16_to_cpu(r->name_len);
pr_err("Volume table record %d dump:\n", idx);
pr_err("\treserved_pebs %d\n", be32_to_cpu(r->reserved_pebs));
pr_err("\talignment %d\n", be32_to_cpu(r->alignment));
pr_err("\tdata_pad %d\n", be32_to_cpu(r->data_pad));
pr_err("\tvol_type %d\n", (int)r->vol_type);
pr_err("\tupd_marker %d\n", (int)r->upd_marker);
pr_err("\tname_len %d\n", name_len);
if (r->name[0] == '\0') {
pr_err("\tname NULL\n");
return;
}
if (name_len <= UBI_VOL_NAME_MAX &&
strnlen(&r->name[0], name_len + 1) == name_len) {
pr_err("\tname %s\n", &r->name[0]);
} else {
pr_err("\t1st 5 characters of name: %c%c%c%c%c\n",
r->name[0], r->name[1], r->name[2], r->name[3],
r->name[4]);
}
pr_err("\tcrc %#08x\n", be32_to_cpu(r->crc));
}
/**
* ubi_dump_av - dump a &struct ubi_ainf_volume object.
* @av: the object to dump
*/
void ubi_dump_av(const struct ubi_ainf_volume *av)
{
pr_err("Volume attaching information dump:\n");
pr_err("\tvol_id %d\n", av->vol_id);
pr_err("\thighest_lnum %d\n", av->highest_lnum);
pr_err("\tleb_count %d\n", av->leb_count);
pr_err("\tcompat %d\n", av->compat);
pr_err("\tvol_type %d\n", av->vol_type);
pr_err("\tused_ebs %d\n", av->used_ebs);
pr_err("\tlast_data_size %d\n", av->last_data_size);
pr_err("\tdata_pad %d\n", av->data_pad);
}
/**
* ubi_dump_aeb - dump a &struct ubi_ainf_peb object.
* @aeb: the object to dump
* @type: object type: 0 - not corrupted, 1 - corrupted
*/
void ubi_dump_aeb(const struct ubi_ainf_peb *aeb, int type)
{
pr_err("eraseblock attaching information dump:\n");
pr_err("\tec %d\n", aeb->ec);
pr_err("\tpnum %d\n", aeb->pnum);
if (type == 0) {
pr_err("\tlnum %d\n", aeb->lnum);
pr_err("\tscrub %d\n", aeb->scrub);
pr_err("\tsqnum %llu\n", aeb->sqnum);
}
}
/**
* ubi_dump_mkvol_req - dump a &struct ubi_mkvol_req object.
* @req: the object to dump
*/
void ubi_dump_mkvol_req(const struct ubi_mkvol_req *req)
{
char nm[17];
pr_err("Volume creation request dump:\n");
pr_err("\tvol_id %d\n", req->vol_id);
pr_err("\talignment %d\n", req->alignment);
pr_err("\tbytes %lld\n", (long long)req->bytes);
pr_err("\tvol_type %d\n", req->vol_type);
pr_err("\tname_len %d\n", req->name_len);
memcpy(nm, req->name, 16);
nm[16] = 0;
pr_err("\t1st 16 characters of name: %s\n", nm);
}
#ifndef __UBOOT__
/*
* Root directory for UBI stuff in debugfs. Contains sub-directories which
* contain the stuff specific to particular UBI devices.
*/
static struct dentry *dfs_rootdir;
/**
* ubi_debugfs_init - create UBI debugfs directory.
*
* Create UBI debugfs directory. Returns zero in case of success and a negative
* error code in case of failure.
*/
int ubi_debugfs_init(void)
{
if (!IS_ENABLED(CONFIG_DEBUG_FS))
return 0;
dfs_rootdir = debugfs_create_dir("ubi", NULL);
if (IS_ERR_OR_NULL(dfs_rootdir)) {
int err = dfs_rootdir ? -ENODEV : PTR_ERR(dfs_rootdir);
pr_err("UBI error: cannot create \"ubi\" debugfs directory, error %d\n",
err);
return err;
}
return 0;
}
/**
* ubi_debugfs_exit - remove UBI debugfs directory.
*/
void ubi_debugfs_exit(void)
{
if (IS_ENABLED(CONFIG_DEBUG_FS))
debugfs_remove(dfs_rootdir);
}
/* Read an UBI debugfs file */
static ssize_t dfs_file_read(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
unsigned long ubi_num = (unsigned long)file->private_data;
struct dentry *dent = file->f_path.dentry;
struct ubi_device *ubi;
struct ubi_debug_info *d;
char buf[8];
int val;
ubi = ubi_get_device(ubi_num);
if (!ubi)
return -ENODEV;
d = &ubi->dbg;
if (dent == d->dfs_chk_gen)
val = d->chk_gen;
else if (dent == d->dfs_chk_io)
val = d->chk_io;
else if (dent == d->dfs_chk_fastmap)
val = d->chk_fastmap;
else if (dent == d->dfs_disable_bgt)
val = d->disable_bgt;
else if (dent == d->dfs_emulate_bitflips)
val = d->emulate_bitflips;
else if (dent == d->dfs_emulate_io_failures)
val = d->emulate_io_failures;
else if (dent == d->dfs_emulate_power_cut) {
snprintf(buf, sizeof(buf), "%u\n", d->emulate_power_cut);
count = simple_read_from_buffer(user_buf, count, ppos,
buf, strlen(buf));
goto out;
} else if (dent == d->dfs_power_cut_min) {
snprintf(buf, sizeof(buf), "%u\n", d->power_cut_min);
count = simple_read_from_buffer(user_buf, count, ppos,
buf, strlen(buf));
goto out;
} else if (dent == d->dfs_power_cut_max) {
snprintf(buf, sizeof(buf), "%u\n", d->power_cut_max);
count = simple_read_from_buffer(user_buf, count, ppos,
buf, strlen(buf));
goto out;
}
else {
count = -EINVAL;
goto out;
}
if (val)
buf[0] = '1';
else
buf[0] = '0';
buf[1] = '\n';
buf[2] = 0x00;
count = simple_read_from_buffer(user_buf, count, ppos, buf, 2);
out:
ubi_put_device(ubi);
return count;
}
/* Write an UBI debugfs file */
static ssize_t dfs_file_write(struct file *file, const char __user *user_buf,
size_t count, loff_t *ppos)
{
unsigned long ubi_num = (unsigned long)file->private_data;
struct dentry *dent = file->f_path.dentry;
struct ubi_device *ubi;
struct ubi_debug_info *d;
size_t buf_size;
char buf[8] = {0};
int val;
ubi = ubi_get_device(ubi_num);
if (!ubi)
return -ENODEV;
d = &ubi->dbg;
buf_size = min_t(size_t, count, (sizeof(buf) - 1));
if (copy_from_user(buf, user_buf, buf_size)) {
count = -EFAULT;
goto out;
}
if (dent == d->dfs_power_cut_min) {
if (kstrtouint(buf, 0, &d->power_cut_min) != 0)
count = -EINVAL;
goto out;
} else if (dent == d->dfs_power_cut_max) {
if (kstrtouint(buf, 0, &d->power_cut_max) != 0)
count = -EINVAL;
goto out;
} else if (dent == d->dfs_emulate_power_cut) {
if (kstrtoint(buf, 0, &val) != 0)
count = -EINVAL;
d->emulate_power_cut = val;
goto out;
}
if (buf[0] == '1')
val = 1;
else if (buf[0] == '0')
val = 0;
else {
count = -EINVAL;
goto out;
}
if (dent == d->dfs_chk_gen)
d->chk_gen = val;
else if (dent == d->dfs_chk_io)
d->chk_io = val;
else if (dent == d->dfs_chk_fastmap)
d->chk_fastmap = val;
else if (dent == d->dfs_disable_bgt)
d->disable_bgt = val;
else if (dent == d->dfs_emulate_bitflips)
d->emulate_bitflips = val;
else if (dent == d->dfs_emulate_io_failures)
d->emulate_io_failures = val;
else
count = -EINVAL;
out:
ubi_put_device(ubi);
return count;
}
/* File operations for all UBI debugfs files */
static const struct file_operations dfs_fops = {
.read = dfs_file_read,
.write = dfs_file_write,
.open = simple_open,
.llseek = no_llseek,
.owner = THIS_MODULE,
};
/**
* ubi_debugfs_init_dev - initialize debugfs for an UBI device.
* @ubi: UBI device description object
*
* This function creates all debugfs files for UBI device @ubi. Returns zero in
* case of success and a negative error code in case of failure.
*/
int ubi_debugfs_init_dev(struct ubi_device *ubi)
{
int err, n;
unsigned long ubi_num = ubi->ubi_num;
const char *fname;
struct dentry *dent;
struct ubi_debug_info *d = &ubi->dbg;
if (!IS_ENABLED(CONFIG_DEBUG_FS))
return 0;
n = snprintf(d->dfs_dir_name, UBI_DFS_DIR_LEN + 1, UBI_DFS_DIR_NAME,
ubi->ubi_num);
if (n == UBI_DFS_DIR_LEN) {
/* The array size is too small */
fname = UBI_DFS_DIR_NAME;
dent = ERR_PTR(-EINVAL);
goto out;
}
fname = d->dfs_dir_name;
dent = debugfs_create_dir(fname, dfs_rootdir);
if (IS_ERR_OR_NULL(dent))
goto out;
d->dfs_dir = dent;
fname = "chk_gen";
dent = debugfs_create_file(fname, S_IWUSR, d->dfs_dir, (void *)ubi_num,
&dfs_fops);
if (IS_ERR_OR_NULL(dent))
goto out_remove;
d->dfs_chk_gen = dent;
fname = "chk_io";
dent = debugfs_create_file(fname, S_IWUSR, d->dfs_dir, (void *)ubi_num,
&dfs_fops);
if (IS_ERR_OR_NULL(dent))
goto out_remove;
d->dfs_chk_io = dent;
fname = "chk_fastmap";
dent = debugfs_create_file(fname, S_IWUSR, d->dfs_dir, (void *)ubi_num,
&dfs_fops);
if (IS_ERR_OR_NULL(dent))
goto out_remove;
d->dfs_chk_fastmap = dent;
fname = "tst_disable_bgt";
dent = debugfs_create_file(fname, S_IWUSR, d->dfs_dir, (void *)ubi_num,
&dfs_fops);
if (IS_ERR_OR_NULL(dent))
goto out_remove;
d->dfs_disable_bgt = dent;
fname = "tst_emulate_bitflips";
dent = debugfs_create_file(fname, S_IWUSR, d->dfs_dir, (void *)ubi_num,
&dfs_fops);
if (IS_ERR_OR_NULL(dent))
goto out_remove;
d->dfs_emulate_bitflips = dent;
fname = "tst_emulate_io_failures";
dent = debugfs_create_file(fname, S_IWUSR, d->dfs_dir, (void *)ubi_num,
&dfs_fops);
if (IS_ERR_OR_NULL(dent))
goto out_remove;
d->dfs_emulate_io_failures = dent;
fname = "tst_emulate_power_cut";
dent = debugfs_create_file(fname, S_IWUSR, d->dfs_dir, (void *)ubi_num,
&dfs_fops);
if (IS_ERR_OR_NULL(dent))
goto out_remove;
d->dfs_emulate_power_cut = dent;
fname = "tst_emulate_power_cut_min";
dent = debugfs_create_file(fname, S_IWUSR, d->dfs_dir, (void *)ubi_num,
&dfs_fops);
if (IS_ERR_OR_NULL(dent))
goto out_remove;
d->dfs_power_cut_min = dent;
fname = "tst_emulate_power_cut_max";
dent = debugfs_create_file(fname, S_IWUSR, d->dfs_dir, (void *)ubi_num,
&dfs_fops);
if (IS_ERR_OR_NULL(dent))
goto out_remove;
d->dfs_power_cut_max = dent;
return 0;
out_remove:
debugfs_remove_recursive(d->dfs_dir);
out:
err = dent ? PTR_ERR(dent) : -ENODEV;
ubi_err(ubi, "cannot create \"%s\" debugfs file or directory, error %d\n",
fname, err);
return err;
}
/**
* dbg_debug_exit_dev - free all debugfs files corresponding to device @ubi
* @ubi: UBI device description object
*/
void ubi_debugfs_exit_dev(struct ubi_device *ubi)
{
if (IS_ENABLED(CONFIG_DEBUG_FS))
debugfs_remove_recursive(ubi->dbg.dfs_dir);
}
/**
* ubi_dbg_power_cut - emulate a power cut if it is time to do so
* @ubi: UBI device description object
* @caller: Flags set to indicate from where the function is being called
*
* Returns non-zero if a power cut was emulated, zero if not.
*/
int ubi_dbg_power_cut(struct ubi_device *ubi, int caller)
{
unsigned int range;
if ((ubi->dbg.emulate_power_cut & caller) == 0)
return 0;
if (ubi->dbg.power_cut_counter == 0) {
ubi->dbg.power_cut_counter = ubi->dbg.power_cut_min;
if (ubi->dbg.power_cut_max > ubi->dbg.power_cut_min) {
range = ubi->dbg.power_cut_max - ubi->dbg.power_cut_min;
ubi->dbg.power_cut_counter += prandom_u32() % range;
}
return 0;
}
ubi->dbg.power_cut_counter--;
if (ubi->dbg.power_cut_counter)
return 0;
ubi_msg(ubi, "XXXXXXXXXXXXXXX emulating a power cut XXXXXXXXXXXXXXXX");
ubi_ro_mode(ubi);
return 1;
}
#else
int ubi_debugfs_init(void)
{
return 0;
}
void ubi_debugfs_exit(void)
{
}
int ubi_debugfs_init_dev(struct ubi_device *ubi)
{
return 0;
}
void ubi_debugfs_exit_dev(struct ubi_device *ubi)
{
}
int ubi_dbg_power_cut(struct ubi_device *ubi, int caller)
{
return 0;
}
#endif
source/bootloader/u-boot-2020.01/drivers/mtd/ubi/debug.h
+143
View File
@@ -0,0 +1,143 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (c) International Business Machines Corp., 2006
*
* Author: Artem Bityutskiy (Битюцкий Артём)
*/
#ifndef __UBI_DEBUG_H__
#define __UBI_DEBUG_H__
void ubi_dump_flash(struct ubi_device *ubi, int pnum, int offset, int len);
void ubi_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr);
void ubi_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr);
#ifndef __UBOOT__
#include <linux/random.h>
#endif
#include <hexdump.h>
#ifndef __UBOOT__
#define ubi_assert(expr) do { \
if (unlikely(!(expr))) { \
pr_crit("UBI assert failed in %s at %u (pid %d)\n", \
__func__, __LINE__, current->pid); \
dump_stack(); \
} \
} while (0)
#else
#define ubi_assert(expr) do { \
if (unlikely(!(expr))) { \
pr_debug("UBI assert failed in %s at %u\n", \
__func__, __LINE__); \
dump_stack(); \
} \
} while (0)
#endif
#define ubi_dbg_print_hex_dump(ps, pt, r, g, b, len, a) \
print_hex_dump(ps, pt, r, g, b, len, a)
#define ubi_dbg_msg(type, fmt, ...) \
pr_debug("UBI DBG " type " (pid %d): " fmt "\n", current->pid, \
##__VA_ARGS__)
/* General debugging messages */
#define dbg_gen(fmt, ...) ubi_dbg_msg("gen", fmt, ##__VA_ARGS__)
/* Messages from the eraseblock association sub-system */
#define dbg_eba(fmt, ...) ubi_dbg_msg("eba", fmt, ##__VA_ARGS__)
/* Messages from the wear-leveling sub-system */
#define dbg_wl(fmt, ...) ubi_dbg_msg("wl", fmt, ##__VA_ARGS__)
/* Messages from the input/output sub-system */
#define dbg_io(fmt, ...) ubi_dbg_msg("io", fmt, ##__VA_ARGS__)
/* Initialization and build messages */
#define dbg_bld(fmt, ...) ubi_dbg_msg("bld", fmt, ##__VA_ARGS__)
void ubi_dump_vol_info(const struct ubi_volume *vol);
void ubi_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx);
void ubi_dump_av(const struct ubi_ainf_volume *av);
void ubi_dump_aeb(const struct ubi_ainf_peb *aeb, int type);
void ubi_dump_mkvol_req(const struct ubi_mkvol_req *req);
int ubi_self_check_all_ff(struct ubi_device *ubi, int pnum, int offset,
int len);
int ubi_debugfs_init(void);
void ubi_debugfs_exit(void);
int ubi_debugfs_init_dev(struct ubi_device *ubi);
void ubi_debugfs_exit_dev(struct ubi_device *ubi);
/**
* ubi_dbg_is_bgt_disabled - if the background thread is disabled.
* @ubi: UBI device description object
*
* Returns non-zero if the UBI background thread is disabled for testing
* purposes.
*/
static inline int ubi_dbg_is_bgt_disabled(const struct ubi_device *ubi)
{
return ubi->dbg.disable_bgt;
}
/**
* ubi_dbg_is_bitflip - if it is time to emulate a bit-flip.
* @ubi: UBI device description object
*
* Returns non-zero if a bit-flip should be emulated, otherwise returns zero.
*/
static inline int ubi_dbg_is_bitflip(const struct ubi_device *ubi)
{
if (ubi->dbg.emulate_bitflips)
return !(prandom_u32() % 200);
return 0;
}
/**
* ubi_dbg_is_write_failure - if it is time to emulate a write failure.
* @ubi: UBI device description object
*
* Returns non-zero if a write failure should be emulated, otherwise returns
* zero.
*/
static inline int ubi_dbg_is_write_failure(const struct ubi_device *ubi)
{
if (ubi->dbg.emulate_io_failures)
return !(prandom_u32() % 500);
return 0;
}
/**
* ubi_dbg_is_erase_failure - if its time to emulate an erase failure.
* @ubi: UBI device description object
*
* Returns non-zero if an erase failure should be emulated, otherwise returns
* zero.
*/
static inline int ubi_dbg_is_erase_failure(const struct ubi_device *ubi)
{
if (ubi->dbg.emulate_io_failures)
return !(prandom_u32() % 400);
return 0;
}
static inline int ubi_dbg_chk_io(const struct ubi_device *ubi)
{
return ubi->dbg.chk_io;
}
static inline int ubi_dbg_chk_gen(const struct ubi_device *ubi)
{
return ubi->dbg.chk_gen;
}
static inline int ubi_dbg_chk_fastmap(const struct ubi_device *ubi)
{
return ubi->dbg.chk_fastmap;
}
static inline void ubi_enable_dbg_chk_fastmap(struct ubi_device *ubi)
{
ubi->dbg.chk_fastmap = 1;
}
int ubi_dbg_power_cut(struct ubi_device *ubi, int caller);
#endif /* !__UBI_DEBUG_H__ */
source/bootloader/u-boot-2020.01/drivers/mtd/ubi/eba.c
+1472
View File
File diff suppressed because it is too large Load Diff
source/bootloader/u-boot-2020.01/drivers/mtd/ubi/fastmap-wl.c
+395
View File
@@ -0,0 +1,395 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2012 Linutronix GmbH
* Copyright (c) 2014 sigma star gmbh
* Author: Richard Weinberger <richard@nod.at>
*
*/
/**
* update_fastmap_work_fn - calls ubi_update_fastmap from a work queue
* @wrk: the work description object
*/
#ifndef __UBOOT__
static void update_fastmap_work_fn(struct work_struct *wrk)
#else
void update_fastmap_work_fn(struct ubi_device *ubi)
#endif
{
#ifndef __UBOOT__
struct ubi_device *ubi = container_of(wrk, struct ubi_device, fm_work);
#endif
ubi_update_fastmap(ubi);
spin_lock(&ubi->wl_lock);
ubi->fm_work_scheduled = 0;
spin_unlock(&ubi->wl_lock);
}
/**
* find_anchor_wl_entry - find wear-leveling entry to used as anchor PEB.
* @root: the RB-tree where to look for
*/
static struct ubi_wl_entry *find_anchor_wl_entry(struct rb_root *root)
{
struct rb_node *p;
struct ubi_wl_entry *e, *victim = NULL;
int max_ec = UBI_MAX_ERASECOUNTER;
ubi_rb_for_each_entry(p, e, root, u.rb) {
if (e->pnum < UBI_FM_MAX_START && e->ec < max_ec) {
victim = e;
max_ec = e->ec;
}
}
return victim;
}
/**
* return_unused_pool_pebs - returns unused PEB to the free tree.
* @ubi: UBI device description object
* @pool: fastmap pool description object
*/
static void return_unused_pool_pebs(struct ubi_device *ubi,
struct ubi_fm_pool *pool)
{
int i;
struct ubi_wl_entry *e;
for (i = pool->used; i < pool->size; i++) {
e = ubi->lookuptbl[pool->pebs[i]];
wl_tree_add(e, &ubi->free);
ubi->free_count++;
}
}
static int anchor_pebs_avalible(struct rb_root *root)
{
struct rb_node *p;
struct ubi_wl_entry *e;
ubi_rb_for_each_entry(p, e, root, u.rb)
if (e->pnum < UBI_FM_MAX_START)
return 1;
return 0;
}
/**
* ubi_wl_get_fm_peb - find a physical erase block with a given maximal number.
* @ubi: UBI device description object
* @anchor: This PEB will be used as anchor PEB by fastmap
*
* The function returns a physical erase block with a given maximal number
* and removes it from the wl subsystem.
* Must be called with wl_lock held!
*/
struct ubi_wl_entry *ubi_wl_get_fm_peb(struct ubi_device *ubi, int anchor)
{
struct ubi_wl_entry *e = NULL;
if (!ubi->free.rb_node || (ubi->free_count - ubi->beb_rsvd_pebs < 1))
goto out;
if (anchor)
e = find_anchor_wl_entry(&ubi->free);
else
e = find_mean_wl_entry(ubi, &ubi->free);
if (!e)
goto out;
self_check_in_wl_tree(ubi, e, &ubi->free);
/* remove it from the free list,
* the wl subsystem does no longer know this erase block */
rb_erase(&e->u.rb, &ubi->free);
ubi->free_count--;
out:
return e;
}
/**
* ubi_refill_pools - refills all fastmap PEB pools.
* @ubi: UBI device description object
*/
void ubi_refill_pools(struct ubi_device *ubi)
{
struct ubi_fm_pool *wl_pool = &ubi->fm_wl_pool;
struct ubi_fm_pool *pool = &ubi->fm_pool;
struct ubi_wl_entry *e;
int enough;
spin_lock(&ubi->wl_lock);
return_unused_pool_pebs(ubi, wl_pool);
return_unused_pool_pebs(ubi, pool);
wl_pool->size = 0;
pool->size = 0;
for (;;) {
enough = 0;
if (pool->size < pool->max_size) {
if (!ubi->free.rb_node)
break;
e = wl_get_wle(ubi);
if (!e)
break;
pool->pebs[pool->size] = e->pnum;
pool->size++;
} else
enough++;
if (wl_pool->size < wl_pool->max_size) {
if (!ubi->free.rb_node ||
(ubi->free_count - ubi->beb_rsvd_pebs < 5))
break;
e = find_wl_entry(ubi, &ubi->free, WL_FREE_MAX_DIFF);
self_check_in_wl_tree(ubi, e, &ubi->free);
rb_erase(&e->u.rb, &ubi->free);
ubi->free_count--;
wl_pool->pebs[wl_pool->size] = e->pnum;
wl_pool->size++;
} else
enough++;
if (enough == 2)
break;
}
wl_pool->used = 0;
pool->used = 0;
spin_unlock(&ubi->wl_lock);
}
/**
* produce_free_peb - produce a free physical eraseblock.
* @ubi: UBI device description object
*
* This function tries to make a free PEB by means of synchronous execution of
* pending works. This may be needed if, for example the background thread is
* disabled. Returns zero in case of success and a negative error code in case
* of failure.
*/
static int produce_free_peb(struct ubi_device *ubi)
{
int err;
while (!ubi->free.rb_node && ubi->works_count) {
dbg_wl("do one work synchronously");
err = do_work(ubi);
if (err)
return err;
}
return 0;
}
/**
* ubi_wl_get_peb - get a physical eraseblock.
* @ubi: UBI device description object
*
* This function returns a physical eraseblock in case of success and a
* negative error code in case of failure.
* Returns with ubi->fm_eba_sem held in read mode!
*/
int ubi_wl_get_peb(struct ubi_device *ubi)
{
int ret, retried = 0;
struct ubi_fm_pool *pool = &ubi->fm_pool;
struct ubi_fm_pool *wl_pool = &ubi->fm_wl_pool;
again:
down_read(&ubi->fm_eba_sem);
spin_lock(&ubi->wl_lock);
/* We check here also for the WL pool because at this point we can
* refill the WL pool synchronous. */
if (pool->used == pool->size || wl_pool->used == wl_pool->size) {
spin_unlock(&ubi->wl_lock);
up_read(&ubi->fm_eba_sem);
ret = ubi_update_fastmap(ubi);
if (ret) {
ubi_msg(ubi, "Unable to write a new fastmap: %i", ret);
down_read(&ubi->fm_eba_sem);
return -ENOSPC;
}
down_read(&ubi->fm_eba_sem);
spin_lock(&ubi->wl_lock);
}
if (pool->used == pool->size) {
spin_unlock(&ubi->wl_lock);
if (retried) {
ubi_err(ubi, "Unable to get a free PEB from user WL pool");
ret = -ENOSPC;
goto out;
}
retried = 1;
up_read(&ubi->fm_eba_sem);
ret = produce_free_peb(ubi);
if (ret < 0) {
down_read(&ubi->fm_eba_sem);
goto out;
}
goto again;
}
ubi_assert(pool->used < pool->size);
ret = pool->pebs[pool->used++];
prot_queue_add(ubi, ubi->lookuptbl[ret]);
spin_unlock(&ubi->wl_lock);
out:
return ret;
}
/* get_peb_for_wl - returns a PEB to be used internally by the WL sub-system.
*
* @ubi: UBI device description object
*/
static struct ubi_wl_entry *get_peb_for_wl(struct ubi_device *ubi)
{
struct ubi_fm_pool *pool = &ubi->fm_wl_pool;
int pnum;
if (pool->used == pool->size) {
#ifndef __UBOOT__
/* We cannot update the fastmap here because this
* function is called in atomic context.
* Let's fail here and refill/update it as soon as possible. */
if (!ubi->fm_work_scheduled) {
ubi->fm_work_scheduled = 1;
schedule_work(&ubi->fm_work);
}
return NULL;
#else
/*
* No work queues in U-Boot, we must do this immediately
*/
update_fastmap_work_fn(ubi);
#endif
}
pnum = pool->pebs[pool->used++];
return ubi->lookuptbl[pnum];
}
/**
* ubi_ensure_anchor_pebs - schedule wear-leveling to produce an anchor PEB.
* @ubi: UBI device description object
*/
int ubi_ensure_anchor_pebs(struct ubi_device *ubi)
{
struct ubi_work *wrk;
spin_lock(&ubi->wl_lock);
if (ubi->wl_scheduled) {
spin_unlock(&ubi->wl_lock);
return 0;
}
ubi->wl_scheduled = 1;
spin_unlock(&ubi->wl_lock);
wrk = kmalloc(sizeof(struct ubi_work), GFP_NOFS);
if (!wrk) {
spin_lock(&ubi->wl_lock);
ubi->wl_scheduled = 0;
spin_unlock(&ubi->wl_lock);
return -ENOMEM;
}
wrk->anchor = 1;
wrk->func = &wear_leveling_worker;
schedule_ubi_work(ubi, wrk);
return 0;
}
/**
* ubi_wl_put_fm_peb - returns a PEB used in a fastmap to the wear-leveling
* sub-system.
* see: ubi_wl_put_peb()
*
* @ubi: UBI device description object
* @fm_e: physical eraseblock to return
* @lnum: the last used logical eraseblock number for the PEB
* @torture: if this physical eraseblock has to be tortured
*/
int ubi_wl_put_fm_peb(struct ubi_device *ubi, struct ubi_wl_entry *fm_e,
int lnum, int torture)
{
struct ubi_wl_entry *e;
int vol_id, pnum = fm_e->pnum;
dbg_wl("PEB %d", pnum);
ubi_assert(pnum >= 0);
ubi_assert(pnum < ubi->peb_count);
spin_lock(&ubi->wl_lock);
e = ubi->lookuptbl[pnum];
/* This can happen if we recovered from a fastmap the very
* first time and writing now a new one. In this case the wl system
* has never seen any PEB used by the original fastmap.
*/
if (!e) {
e = fm_e;
ubi_assert(e->ec >= 0);
ubi->lookuptbl[pnum] = e;
}
spin_unlock(&ubi->wl_lock);
vol_id = lnum ? UBI_FM_DATA_VOLUME_ID : UBI_FM_SB_VOLUME_ID;
return schedule_erase(ubi, e, vol_id, lnum, torture);
}
/**
* ubi_is_erase_work - checks whether a work is erase work.
* @wrk: The work object to be checked
*/
int ubi_is_erase_work(struct ubi_work *wrk)
{
return wrk->func == erase_worker;
}
static void ubi_fastmap_close(struct ubi_device *ubi)
{
int i;
return_unused_pool_pebs(ubi, &ubi->fm_pool);
return_unused_pool_pebs(ubi, &ubi->fm_wl_pool);
if (ubi->fm) {
for (i = 0; i < ubi->fm->used_blocks; i++)
kfree(ubi->fm->e[i]);
}
kfree(ubi->fm);
}
/**
* may_reserve_for_fm - tests whether a PEB shall be reserved for fastmap.
* See find_mean_wl_entry()
*
* @ubi: UBI device description object
* @e: physical eraseblock to return
* @root: RB tree to test against.
*/
static struct ubi_wl_entry *may_reserve_for_fm(struct ubi_device *ubi,
struct ubi_wl_entry *e,
struct rb_root *root) {
if (e && !ubi->fm_disabled && !ubi->fm &&
e->pnum < UBI_FM_MAX_START)
e = rb_entry(rb_next(root->rb_node),
struct ubi_wl_entry, u.rb);
return e;
}
source/bootloader/u-boot-2020.01/drivers/mtd/ubi/fastmap.c
+1654
View File
File diff suppressed because it is too large Load Diff
source/bootloader/u-boot-2020.01/drivers/mtd/ubi/io.c
+1432
View File
File diff suppressed because it is too large Load Diff
source/bootloader/u-boot-2020.01/drivers/mtd/ubi/kapi.c
+863
View File
@@ -0,0 +1,863 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) International Business Machines Corp., 2006
*
* Author: Artem Bityutskiy (Битюцкий Артём)
*/
/* This file mostly implements UBI kernel API functions */
#ifndef __UBOOT__
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/namei.h>
#include <linux/fs.h>
#include <asm/div64.h>
#else
#include <ubi_uboot.h>
#endif
#include <linux/err.h>
#include "ubi.h"
/**
* ubi_do_get_device_info - get information about UBI device.
* @ubi: UBI device description object
* @di: the information is stored here
*
* This function is the same as 'ubi_get_device_info()', but it assumes the UBI
* device is locked and cannot disappear.
*/
void ubi_do_get_device_info(struct ubi_device *ubi, struct ubi_device_info *di)
{
di->ubi_num = ubi->ubi_num;
di->leb_size = ubi->leb_size;
di->leb_start = ubi->leb_start;
di->min_io_size = ubi->min_io_size;
di->max_write_size = ubi->max_write_size;
di->ro_mode = ubi->ro_mode;
#ifndef __UBOOT__
di->cdev = ubi->cdev.dev;
#endif
}
EXPORT_SYMBOL_GPL(ubi_do_get_device_info);
/**
* ubi_get_device_info - get information about UBI device.
* @ubi_num: UBI device number
* @di: the information is stored here
*
* This function returns %0 in case of success, %-EINVAL if the UBI device
* number is invalid, and %-ENODEV if there is no such UBI device.
*/
int ubi_get_device_info(int ubi_num, struct ubi_device_info *di)
{
struct ubi_device *ubi;
if (ubi_num < 0 || ubi_num >= UBI_MAX_DEVICES)
return -EINVAL;
ubi = ubi_get_device(ubi_num);
if (!ubi)
return -ENODEV;
ubi_do_get_device_info(ubi, di);
ubi_put_device(ubi);
return 0;
}
EXPORT_SYMBOL_GPL(ubi_get_device_info);
/**
* ubi_do_get_volume_info - get information about UBI volume.
* @ubi: UBI device description object
* @vol: volume description object
* @vi: the information is stored here
*/
void ubi_do_get_volume_info(struct ubi_device *ubi, struct ubi_volume *vol,
struct ubi_volume_info *vi)
{
vi->vol_id = vol->vol_id;
vi->ubi_num = ubi->ubi_num;
vi->size = vol->reserved_pebs;
vi->used_bytes = vol->used_bytes;
vi->vol_type = vol->vol_type;
vi->corrupted = vol->corrupted;
vi->upd_marker = vol->upd_marker;
vi->alignment = vol->alignment;
vi->usable_leb_size = vol->usable_leb_size;
vi->name_len = vol->name_len;
vi->name = vol->name;
vi->cdev = vol->cdev.dev;
}
/**
* ubi_get_volume_info - get information about UBI volume.
* @desc: volume descriptor
* @vi: the information is stored here
*/
void ubi_get_volume_info(struct ubi_volume_desc *desc,
struct ubi_volume_info *vi)
{
ubi_do_get_volume_info(desc->vol->ubi, desc->vol, vi);
}
EXPORT_SYMBOL_GPL(ubi_get_volume_info);
/**
* ubi_open_volume - open UBI volume.
* @ubi_num: UBI device number
* @vol_id: volume ID
* @mode: open mode
*
* The @mode parameter specifies if the volume should be opened in read-only
* mode, read-write mode, or exclusive mode. The exclusive mode guarantees that
* nobody else will be able to open this volume. UBI allows to have many volume
* readers and one writer at a time.
*
* If a static volume is being opened for the first time since boot, it will be
* checked by this function, which means it will be fully read and the CRC
* checksum of each logical eraseblock will be checked.
*
* This function returns volume descriptor in case of success and a negative
* error code in case of failure.
*/
struct ubi_volume_desc *ubi_open_volume(int ubi_num, int vol_id, int mode)
{
int err;
struct ubi_volume_desc *desc;
struct ubi_device *ubi;
struct ubi_volume *vol;
dbg_gen("open device %d, volume %d, mode %d", ubi_num, vol_id, mode);
if (ubi_num < 0 || ubi_num >= UBI_MAX_DEVICES)
return ERR_PTR(-EINVAL);
if (mode != UBI_READONLY && mode != UBI_READWRITE &&
mode != UBI_EXCLUSIVE && mode != UBI_METAONLY)
return ERR_PTR(-EINVAL);
/*
* First of all, we have to get the UBI device to prevent its removal.
*/
ubi = ubi_get_device(ubi_num);
if (!ubi)
return ERR_PTR(-ENODEV);
if (vol_id < 0 || vol_id >= ubi->vtbl_slots) {
err = -EINVAL;
goto out_put_ubi;
}
desc = kmalloc(sizeof(struct ubi_volume_desc), GFP_KERNEL);
if (!desc) {
err = -ENOMEM;
goto out_put_ubi;
}
err = -ENODEV;
if (!try_module_get(THIS_MODULE))
goto out_free;
spin_lock(&ubi->volumes_lock);
vol = ubi->volumes[vol_id];
if (!vol)
goto out_unlock;
err = -EBUSY;
switch (mode) {
case UBI_READONLY:
if (vol->exclusive)
goto out_unlock;
vol->readers += 1;
break;
case UBI_READWRITE:
if (vol->exclusive || vol->writers > 0)
goto out_unlock;
vol->writers += 1;
break;
case UBI_EXCLUSIVE:
if (vol->exclusive || vol->writers || vol->readers ||
vol->metaonly)
goto out_unlock;
vol->exclusive = 1;
break;
case UBI_METAONLY:
if (vol->metaonly || vol->exclusive)
goto out_unlock;
vol->metaonly = 1;
break;
}
get_device(&vol->dev);
vol->ref_count += 1;
spin_unlock(&ubi->volumes_lock);
desc->vol = vol;
desc->mode = mode;
mutex_lock(&ubi->ckvol_mutex);
if (!vol->checked && !vol->skip_check) {
/* This is the first open - check the volume */
err = ubi_check_volume(ubi, vol_id);
if (err < 0) {
mutex_unlock(&ubi->ckvol_mutex);
ubi_close_volume(desc);
return ERR_PTR(err);
}
if (err == 1) {
ubi_warn(ubi, "volume %d on UBI device %d is corrupted",
vol_id, ubi->ubi_num);
vol->corrupted = 1;
}
vol->checked = 1;
}
mutex_unlock(&ubi->ckvol_mutex);
return desc;
out_unlock:
spin_unlock(&ubi->volumes_lock);
module_put(THIS_MODULE);
out_free:
kfree(desc);
out_put_ubi:
ubi_put_device(ubi);
ubi_err(ubi, "cannot open device %d, volume %d, error %d",
ubi_num, vol_id, err);
return ERR_PTR(err);
}
EXPORT_SYMBOL_GPL(ubi_open_volume);
/**
* ubi_open_volume_nm - open UBI volume by name.
* @ubi_num: UBI device number
* @name: volume name
* @mode: open mode
*
* This function is similar to 'ubi_open_volume()', but opens a volume by name.
*/
struct ubi_volume_desc *ubi_open_volume_nm(int ubi_num, const char *name,
int mode)
{
int i, vol_id = -1, len;
struct ubi_device *ubi;
struct ubi_volume_desc *ret;
dbg_gen("open device %d, volume %s, mode %d", ubi_num, name, mode);
if (!name)
return ERR_PTR(-EINVAL);
len = strnlen(name, UBI_VOL_NAME_MAX + 1);
if (len > UBI_VOL_NAME_MAX)
return ERR_PTR(-EINVAL);
if (ubi_num < 0 || ubi_num >= UBI_MAX_DEVICES)
return ERR_PTR(-EINVAL);
ubi = ubi_get_device(ubi_num);
if (!ubi)
return ERR_PTR(-ENODEV);
spin_lock(&ubi->volumes_lock);
/* Walk all volumes of this UBI device */
for (i = 0; i < ubi->vtbl_slots; i++) {
struct ubi_volume *vol = ubi->volumes[i];
if (vol && len == vol->name_len && !strcmp(name, vol->name)) {
vol_id = i;
break;
}
}
spin_unlock(&ubi->volumes_lock);
if (vol_id >= 0)
ret = ubi_open_volume(ubi_num, vol_id, mode);
else
ret = ERR_PTR(-ENODEV);
/*
* We should put the UBI device even in case of success, because
* 'ubi_open_volume()' took a reference as well.
*/
ubi_put_device(ubi);
return ret;
}
EXPORT_SYMBOL_GPL(ubi_open_volume_nm);
#ifndef __UBOOT__
/**
* ubi_open_volume_path - open UBI volume by its character device node path.
* @pathname: volume character device node path
* @mode: open mode
*
* This function is similar to 'ubi_open_volume()', but opens a volume the path
* to its character device node.
*/
struct ubi_volume_desc *ubi_open_volume_path(const char *pathname, int mode)
{
int error, ubi_num, vol_id, mod;
struct inode *inode;
struct path path;
dbg_gen("open volume %s, mode %d", pathname, mode);
if (!pathname || !*pathname)
return ERR_PTR(-EINVAL);
error = kern_path(pathname, LOOKUP_FOLLOW, &path);
if (error)
return ERR_PTR(error);
inode = d_backing_inode(path.dentry);
mod = inode->i_mode;
ubi_num = ubi_major2num(imajor(inode));
vol_id = iminor(inode) - 1;
path_put(&path);
if (!S_ISCHR(mod))
return ERR_PTR(-EINVAL);
if (vol_id >= 0 && ubi_num >= 0)
return ubi_open_volume(ubi_num, vol_id, mode);
return ERR_PTR(-ENODEV);
}
EXPORT_SYMBOL_GPL(ubi_open_volume_path);
#endif
/**
* ubi_close_volume - close UBI volume.
* @desc: volume descriptor
*/
void ubi_close_volume(struct ubi_volume_desc *desc)
{
struct ubi_volume *vol = desc->vol;
struct ubi_device *ubi = vol->ubi;
dbg_gen("close device %d, volume %d, mode %d",
ubi->ubi_num, vol->vol_id, desc->mode);
spin_lock(&ubi->volumes_lock);
switch (desc->mode) {
case UBI_READONLY:
vol->readers -= 1;
break;
case UBI_READWRITE:
vol->writers -= 1;
break;
case UBI_EXCLUSIVE:
vol->exclusive = 0;
break;
case UBI_METAONLY:
vol->metaonly = 0;
break;
}
vol->ref_count -= 1;
spin_unlock(&ubi->volumes_lock);
kfree(desc);
put_device(&vol->dev);
ubi_put_device(ubi);
module_put(THIS_MODULE);
}
EXPORT_SYMBOL_GPL(ubi_close_volume);
/**
* leb_read_sanity_check - does sanity checks on read requests.
* @desc: volume descriptor
* @lnum: logical eraseblock number to read from
* @offset: offset within the logical eraseblock to read from
* @len: how many bytes to read
*
* This function is used by ubi_leb_read() and ubi_leb_read_sg()
* to perform sanity checks.
*/
static int leb_read_sanity_check(struct ubi_volume_desc *desc, int lnum,
int offset, int len)
{
struct ubi_volume *vol = desc->vol;
struct ubi_device *ubi = vol->ubi;
int vol_id = vol->vol_id;
if (vol_id < 0 || vol_id >= ubi->vtbl_slots || lnum < 0 ||
lnum >= vol->used_ebs || offset < 0 || len < 0 ||
offset + len > vol->usable_leb_size)
return -EINVAL;
if (vol->vol_type == UBI_STATIC_VOLUME) {
if (vol->used_ebs == 0)
/* Empty static UBI volume */
return 0;
if (lnum == vol->used_ebs - 1 &&
offset + len > vol->last_eb_bytes)
return -EINVAL;
}
if (vol->upd_marker)
return -EBADF;
return 0;
}
/**
* ubi_leb_read - read data.
* @desc: volume descriptor
* @lnum: logical eraseblock number to read from
* @buf: buffer where to store the read data
* @offset: offset within the logical eraseblock to read from
* @len: how many bytes to read
* @check: whether UBI has to check the read data's CRC or not.
*
* This function reads data from offset @offset of logical eraseblock @lnum and
* stores the data at @buf. When reading from static volumes, @check specifies
* whether the data has to be checked or not. If yes, the whole logical
* eraseblock will be read and its CRC checksum will be checked (i.e., the CRC
* checksum is per-eraseblock). So checking may substantially slow down the
* read speed. The @check argument is ignored for dynamic volumes.
*
* In case of success, this function returns zero. In case of failure, this
* function returns a negative error code.
*
* %-EBADMSG error code is returned:
* o for both static and dynamic volumes if MTD driver has detected a data
* integrity problem (unrecoverable ECC checksum mismatch in case of NAND);
* o for static volumes in case of data CRC mismatch.
*
* If the volume is damaged because of an interrupted update this function just
* returns immediately with %-EBADF error code.
*/
int ubi_leb_read(struct ubi_volume_desc *desc, int lnum, char *buf, int offset,
int len, int check)
{
struct ubi_volume *vol = desc->vol;
struct ubi_device *ubi = vol->ubi;
int err, vol_id = vol->vol_id;
dbg_gen("read %d bytes from LEB %d:%d:%d", len, vol_id, lnum, offset);
err = leb_read_sanity_check(desc, lnum, offset, len);
if (err < 0)
return err;
if (len == 0)
return 0;
err = ubi_eba_read_leb(ubi, vol, lnum, buf, offset, len, check);
if (err && mtd_is_eccerr(err) && vol->vol_type == UBI_STATIC_VOLUME) {
ubi_warn(ubi, "mark volume %d as corrupted", vol_id);
vol->corrupted = 1;
}
return err;
}
EXPORT_SYMBOL_GPL(ubi_leb_read);
#ifndef __UBOOT__
/**
* ubi_leb_read_sg - read data into a scatter gather list.
* @desc: volume descriptor
* @lnum: logical eraseblock number to read from
* @buf: buffer where to store the read data
* @offset: offset within the logical eraseblock to read from
* @len: how many bytes to read
* @check: whether UBI has to check the read data's CRC or not.
*
* This function works exactly like ubi_leb_read_sg(). But instead of
* storing the read data into a buffer it writes to an UBI scatter gather
* list.
*/
int ubi_leb_read_sg(struct ubi_volume_desc *desc, int lnum, struct ubi_sgl *sgl,
int offset, int len, int check)
{
struct ubi_volume *vol = desc->vol;
struct ubi_device *ubi = vol->ubi;
int err, vol_id = vol->vol_id;
dbg_gen("read %d bytes from LEB %d:%d:%d", len, vol_id, lnum, offset);
err = leb_read_sanity_check(desc, lnum, offset, len);
if (err < 0)
return err;
if (len == 0)
return 0;
err = ubi_eba_read_leb_sg(ubi, vol, sgl, lnum, offset, len, check);
if (err && mtd_is_eccerr(err) && vol->vol_type == UBI_STATIC_VOLUME) {
ubi_warn(ubi, "mark volume %d as corrupted", vol_id);
vol->corrupted = 1;
}
return err;
}
EXPORT_SYMBOL_GPL(ubi_leb_read_sg);
#endif
/**
* ubi_leb_write - write data.
* @desc: volume descriptor
* @lnum: logical eraseblock number to write to
* @buf: data to write
* @offset: offset within the logical eraseblock where to write
* @len: how many bytes to write
*
* This function writes @len bytes of data from @buf to offset @offset of
* logical eraseblock @lnum.
*
* This function takes care of physical eraseblock write failures. If write to
* the physical eraseblock write operation fails, the logical eraseblock is
* re-mapped to another physical eraseblock, the data is recovered, and the
* write finishes. UBI has a pool of reserved physical eraseblocks for this.
*
* If all the data were successfully written, zero is returned. If an error
* occurred and UBI has not been able to recover from it, this function returns
* a negative error code. Note, in case of an error, it is possible that
* something was still written to the flash media, but that may be some
* garbage.
*
* If the volume is damaged because of an interrupted update this function just
* returns immediately with %-EBADF code.
*/
int ubi_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf,
int offset, int len)
{
struct ubi_volume *vol = desc->vol;
struct ubi_device *ubi = vol->ubi;
int vol_id = vol->vol_id;
dbg_gen("write %d bytes to LEB %d:%d:%d", len, vol_id, lnum, offset);
if (vol_id < 0 || vol_id >= ubi->vtbl_slots)
return -EINVAL;
if (desc->mode == UBI_READONLY || vol->vol_type == UBI_STATIC_VOLUME)
return -EROFS;
if (lnum < 0 || lnum >= vol->reserved_pebs || offset < 0 || len < 0 ||
offset + len > vol->usable_leb_size ||
offset & (ubi->min_io_size - 1) || len & (ubi->min_io_size - 1))
return -EINVAL;
if (vol->upd_marker)
return -EBADF;
if (len == 0)
return 0;
return ubi_eba_write_leb(ubi, vol, lnum, buf, offset, len);
}
EXPORT_SYMBOL_GPL(ubi_leb_write);
/*
* ubi_leb_change - change logical eraseblock atomically.
* @desc: volume descriptor
* @lnum: logical eraseblock number to change
* @buf: data to write
* @len: how many bytes to write
*
* This function changes the contents of a logical eraseblock atomically. @buf
* has to contain new logical eraseblock data, and @len - the length of the
* data, which has to be aligned. The length may be shorter than the logical
* eraseblock size, ant the logical eraseblock may be appended to more times
* later on. This function guarantees that in case of an unclean reboot the old
* contents is preserved. Returns zero in case of success and a negative error
* code in case of failure.
*/
int ubi_leb_change(struct ubi_volume_desc *desc, int lnum, const void *buf,
int len)
{
struct ubi_volume *vol = desc->vol;
struct ubi_device *ubi = vol->ubi;
int vol_id = vol->vol_id;
dbg_gen("atomically write %d bytes to LEB %d:%d", len, vol_id, lnum);
if (vol_id < 0 || vol_id >= ubi->vtbl_slots)
return -EINVAL;
if (desc->mode == UBI_READONLY || vol->vol_type == UBI_STATIC_VOLUME)
return -EROFS;
if (lnum < 0 || lnum >= vol->reserved_pebs || len < 0 ||
len > vol->usable_leb_size || len & (ubi->min_io_size - 1))
return -EINVAL;
if (vol->upd_marker)
return -EBADF;
if (len == 0)
return 0;
return ubi_eba_atomic_leb_change(ubi, vol, lnum, buf, len);
}
EXPORT_SYMBOL_GPL(ubi_leb_change);
/**
* ubi_leb_erase - erase logical eraseblock.
* @desc: volume descriptor
* @lnum: logical eraseblock number
*
* This function un-maps logical eraseblock @lnum and synchronously erases the
* correspondent physical eraseblock. Returns zero in case of success and a
* negative error code in case of failure.
*
* If the volume is damaged because of an interrupted update this function just
* returns immediately with %-EBADF code.
*/
int ubi_leb_erase(struct ubi_volume_desc *desc, int lnum)
{
struct ubi_volume *vol = desc->vol;
struct ubi_device *ubi = vol->ubi;
int err;
dbg_gen("erase LEB %d:%d", vol->vol_id, lnum);
if (desc->mode == UBI_READONLY || vol->vol_type == UBI_STATIC_VOLUME)
return -EROFS;
if (lnum < 0 || lnum >= vol->reserved_pebs)
return -EINVAL;
if (vol->upd_marker)
return -EBADF;
err = ubi_eba_unmap_leb(ubi, vol, lnum);
if (err)
return err;
return ubi_wl_flush(ubi, vol->vol_id, lnum);
}
EXPORT_SYMBOL_GPL(ubi_leb_erase);
/**
* ubi_leb_unmap - un-map logical eraseblock.
* @desc: volume descriptor
* @lnum: logical eraseblock number
*
* This function un-maps logical eraseblock @lnum and schedules the
* corresponding physical eraseblock for erasure, so that it will eventually be
* physically erased in background. This operation is much faster than the
* erase operation.
*
* Unlike erase, the un-map operation does not guarantee that the logical
* eraseblock will contain all 0xFF bytes when UBI is initialized again. For
* example, if several logical eraseblocks are un-mapped, and an unclean reboot
* happens after this, the logical eraseblocks will not necessarily be
* un-mapped again when this MTD device is attached. They may actually be
* mapped to the same physical eraseblocks again. So, this function has to be
* used with care.
*
* In other words, when un-mapping a logical eraseblock, UBI does not store
* any information about this on the flash media, it just marks the logical
* eraseblock as "un-mapped" in RAM. If UBI is detached before the physical
* eraseblock is physically erased, it will be mapped again to the same logical
* eraseblock when the MTD device is attached again.
*
* The main and obvious use-case of this function is when the contents of a
* logical eraseblock has to be re-written. Then it is much more efficient to
* first un-map it, then write new data, rather than first erase it, then write
* new data. Note, once new data has been written to the logical eraseblock,
* UBI guarantees that the old contents has gone forever. In other words, if an
* unclean reboot happens after the logical eraseblock has been un-mapped and
* then written to, it will contain the last written data.
*
* This function returns zero in case of success and a negative error code in
* case of failure. If the volume is damaged because of an interrupted update
* this function just returns immediately with %-EBADF code.
*/
int ubi_leb_unmap(struct ubi_volume_desc *desc, int lnum)
{
struct ubi_volume *vol = desc->vol;
struct ubi_device *ubi = vol->ubi;
dbg_gen("unmap LEB %d:%d", vol->vol_id, lnum);
if (desc->mode == UBI_READONLY || vol->vol_type == UBI_STATIC_VOLUME)
return -EROFS;
if (lnum < 0 || lnum >= vol->reserved_pebs)
return -EINVAL;
if (vol->upd_marker)
return -EBADF;
return ubi_eba_unmap_leb(ubi, vol, lnum);
}
EXPORT_SYMBOL_GPL(ubi_leb_unmap);
/**
* ubi_leb_map - map logical eraseblock to a physical eraseblock.
* @desc: volume descriptor
* @lnum: logical eraseblock number
*
* This function maps an un-mapped logical eraseblock @lnum to a physical
* eraseblock. This means, that after a successful invocation of this
* function the logical eraseblock @lnum will be empty (contain only %0xFF
* bytes) and be mapped to a physical eraseblock, even if an unclean reboot
* happens.
*
* This function returns zero in case of success, %-EBADF if the volume is
* damaged because of an interrupted update, %-EBADMSG if the logical
* eraseblock is already mapped, and other negative error codes in case of
* other failures.
*/
int ubi_leb_map(struct ubi_volume_desc *desc, int lnum)
{
struct ubi_volume *vol = desc->vol;
struct ubi_device *ubi = vol->ubi;
dbg_gen("unmap LEB %d:%d", vol->vol_id, lnum);
if (desc->mode == UBI_READONLY || vol->vol_type == UBI_STATIC_VOLUME)
return -EROFS;
if (lnum < 0 || lnum >= vol->reserved_pebs)
return -EINVAL;
if (vol->upd_marker)
return -EBADF;
if (vol->eba_tbl[lnum] >= 0)
return -EBADMSG;
return ubi_eba_write_leb(ubi, vol, lnum, NULL, 0, 0);
}
EXPORT_SYMBOL_GPL(ubi_leb_map);
/**
* ubi_is_mapped - check if logical eraseblock is mapped.
* @desc: volume descriptor
* @lnum: logical eraseblock number
*
* This function checks if logical eraseblock @lnum is mapped to a physical
* eraseblock. If a logical eraseblock is un-mapped, this does not necessarily
* mean it will still be un-mapped after the UBI device is re-attached. The
* logical eraseblock may become mapped to the physical eraseblock it was last
* mapped to.
*
* This function returns %1 if the LEB is mapped, %0 if not, and a negative
* error code in case of failure. If the volume is damaged because of an
* interrupted update this function just returns immediately with %-EBADF error
* code.
*/
int ubi_is_mapped(struct ubi_volume_desc *desc, int lnum)
{
struct ubi_volume *vol = desc->vol;
dbg_gen("test LEB %d:%d", vol->vol_id, lnum);
if (lnum < 0 || lnum >= vol->reserved_pebs)
return -EINVAL;
if (vol->upd_marker)
return -EBADF;
return vol->eba_tbl[lnum] >= 0;
}
EXPORT_SYMBOL_GPL(ubi_is_mapped);
/**
* ubi_sync - synchronize UBI device buffers.
* @ubi_num: UBI device to synchronize
*
* The underlying MTD device may cache data in hardware or in software. This
* function ensures the caches are flushed. Returns zero in case of success and
* a negative error code in case of failure.
*/
int ubi_sync(int ubi_num)
{
struct ubi_device *ubi;
ubi = ubi_get_device(ubi_num);
if (!ubi)
return -ENODEV;
mtd_sync(ubi->mtd);
ubi_put_device(ubi);
return 0;
}
EXPORT_SYMBOL_GPL(ubi_sync);
/**
* ubi_flush - flush UBI work queue.
* @ubi_num: UBI device to flush work queue
* @vol_id: volume id to flush for
* @lnum: logical eraseblock number to flush for
*
* This function executes all pending works for a particular volume id / logical
* eraseblock number pair. If either value is set to %UBI_ALL, then it acts as
* a wildcard for all of the corresponding volume numbers or logical
* eraseblock numbers. It returns zero in case of success and a negative error
* code in case of failure.
*/
int ubi_flush(int ubi_num, int vol_id, int lnum)
{
struct ubi_device *ubi;
int err = 0;
ubi = ubi_get_device(ubi_num);
if (!ubi)
return -ENODEV;
err = ubi_wl_flush(ubi, vol_id, lnum);
ubi_put_device(ubi);
return err;
}
EXPORT_SYMBOL_GPL(ubi_flush);
#ifndef __UBOOT__
BLOCKING_NOTIFIER_HEAD(ubi_notifiers);
/**
* ubi_register_volume_notifier - register a volume notifier.
* @nb: the notifier description object
* @ignore_existing: if non-zero, do not send "added" notification for all
* already existing volumes
*
* This function registers a volume notifier, which means that
* 'nb->notifier_call()' will be invoked when an UBI volume is created,
* removed, re-sized, re-named, or updated. The first argument of the function
* is the notification type. The second argument is pointer to a
* &struct ubi_notification object which describes the notification event.
* Using UBI API from the volume notifier is prohibited.
*
* This function returns zero in case of success and a negative error code
* in case of failure.
*/
int ubi_register_volume_notifier(struct notifier_block *nb,
int ignore_existing)
{
int err;
err = blocking_notifier_chain_register(&ubi_notifiers, nb);
if (err != 0)
return err;
if (ignore_existing)
return 0;
/*
* We are going to walk all UBI devices and all volumes, and
* notify the user about existing volumes by the %UBI_VOLUME_ADDED
* event. We have to lock the @ubi_devices_mutex to make sure UBI
* devices do not disappear.
*/
mutex_lock(&ubi_devices_mutex);
ubi_enumerate_volumes(nb);
mutex_unlock(&ubi_devices_mutex);
return err;
}
EXPORT_SYMBOL_GPL(ubi_register_volume_notifier);
/**
* ubi_unregister_volume_notifier - unregister the volume notifier.
* @nb: the notifier description object
*
* This function unregisters volume notifier @nm and returns zero in case of
* success and a negative error code in case of failure.
*/
int ubi_unregister_volume_notifier(struct notifier_block *nb)
{
return blocking_notifier_chain_unregister(&ubi_notifiers, nb);
}
EXPORT_SYMBOL_GPL(ubi_unregister_volume_notifier);
#endif
source/bootloader/u-boot-2020.01/drivers/mtd/ubi/misc.c
+143
View File
@@ -0,0 +1,143 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) International Business Machines Corp., 2006
*
* Author: Artem Bityutskiy (Битюцкий Артём)
*/
/* Here we keep miscellaneous functions which are used all over the UBI code */
#include <ubi_uboot.h>
#include "ubi.h"
/**
* calc_data_len - calculate how much real data is stored in a buffer.
* @ubi: UBI device description object
* @buf: a buffer with the contents of the physical eraseblock
* @length: the buffer length
*
* This function calculates how much "real data" is stored in @buf and returnes
* the length. Continuous 0xFF bytes at the end of the buffer are not
* considered as "real data".
*/
int ubi_calc_data_len(const struct ubi_device *ubi, const void *buf,
int length)
{
int i;
ubi_assert(!(length & (ubi->min_io_size - 1)));
for (i = length - 1; i >= 0; i--)
if (((const uint8_t *)buf)[i] != 0xFF)
break;
/* The resulting length must be aligned to the minimum flash I/O size */
length = ALIGN(i + 1, ubi->min_io_size);
return length;
}
/**
* ubi_check_volume - check the contents of a static volume.
* @ubi: UBI device description object
* @vol_id: ID of the volume to check
*
* This function checks if static volume @vol_id is corrupted by fully reading
* it and checking data CRC. This function returns %0 if the volume is not
* corrupted, %1 if it is corrupted and a negative error code in case of
* failure. Dynamic volumes are not checked and zero is returned immediately.
*/
int ubi_check_volume(struct ubi_device *ubi, int vol_id)
{
void *buf;
int err = 0, i;
struct ubi_volume *vol = ubi->volumes[vol_id];
if (vol->vol_type != UBI_STATIC_VOLUME)
return 0;
buf = vmalloc(vol->usable_leb_size);
if (!buf)
return -ENOMEM;
for (i = 0; i < vol->used_ebs; i++) {
int size;
cond_resched();
if (i == vol->used_ebs - 1)
size = vol->last_eb_bytes;
else
size = vol->usable_leb_size;
err = ubi_eba_read_leb(ubi, vol, i, buf, 0, size, 1);
if (err) {
if (mtd_is_eccerr(err))
err = 1;
break;
}
}
vfree(buf);
return err;
}
/**
* ubi_update_reserved - update bad eraseblock handling accounting data.
* @ubi: UBI device description object
*
* This function calculates the gap between current number of PEBs reserved for
* bad eraseblock handling and the required level of PEBs that must be
* reserved, and if necessary, reserves more PEBs to fill that gap, according
* to availability. Should be called with ubi->volumes_lock held.
*/
void ubi_update_reserved(struct ubi_device *ubi)
{
int need = ubi->beb_rsvd_level - ubi->beb_rsvd_pebs;
if (need <= 0 || ubi->avail_pebs == 0)
return;
need = min_t(int, need, ubi->avail_pebs);
ubi->avail_pebs -= need;
ubi->rsvd_pebs += need;
ubi->beb_rsvd_pebs += need;
ubi_msg(ubi, "reserved more %d PEBs for bad PEB handling", need);
}
/**
* ubi_calculate_reserved - calculate how many PEBs must be reserved for bad
* eraseblock handling.
* @ubi: UBI device description object
*/
void ubi_calculate_reserved(struct ubi_device *ubi)
{
/*
* Calculate the actual number of PEBs currently needed to be reserved
* for future bad eraseblock handling.
*/
ubi->beb_rsvd_level = ubi->bad_peb_limit - ubi->bad_peb_count;
if (ubi->beb_rsvd_level < 0) {
ubi->beb_rsvd_level = 0;
ubi_warn(ubi, "number of bad PEBs (%d) is above the expected limit (%d), not reserving any PEBs for bad PEB handling, will use available PEBs (if any)",
ubi->bad_peb_count, ubi->bad_peb_limit);
}
}
/**
* ubi_check_pattern - check if buffer contains only a certain byte pattern.
* @buf: buffer to check
* @patt: the pattern to check
* @size: buffer size in bytes
*
* This function returns %1 in there are only @patt bytes in @buf, and %0 if
* something else was also found.
*/
int ubi_check_pattern(const void *buf, uint8_t patt, int size)
{
int i;
for (i = 0; i < size; i++)
if (((const uint8_t *)buf)[i] != patt)
return 0;
return 1;
}
source/bootloader/u-boot-2020.01/drivers/mtd/ubi/ubi-media.h
+510
View File
@@ -0,0 +1,510 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (c) International Business Machines Corp., 2006
*
* Authors: Artem Bityutskiy (Битюцкий Артём)
* Thomas Gleixner
* Frank Haverkamp
* Oliver Lohmann
* Andreas Arnez
*/
/*
* This file defines the layout of UBI headers and all the other UBI on-flash
* data structures.
*/
#ifndef __UBI_MEDIA_H__
#define __UBI_MEDIA_H__
#include <asm/byteorder.h>
/* The version of UBI images supported by this implementation */
#define UBI_VERSION 1
/* The highest erase counter value supported by this implementation */
#define UBI_MAX_ERASECOUNTER 0x7FFFFFFF
/* The initial CRC32 value used when calculating CRC checksums */
#define UBI_CRC32_INIT 0xFFFFFFFFU
/* Erase counter header magic number (ASCII "UBI#") */
#define UBI_EC_HDR_MAGIC 0x55424923
/* Volume identifier header magic number (ASCII "UBI!") */
#define UBI_VID_HDR_MAGIC 0x55424921
/*
* Volume type constants used in the volume identifier header.
*
* @UBI_VID_DYNAMIC: dynamic volume
* @UBI_VID_STATIC: static volume
*/
enum {
UBI_VID_DYNAMIC = 1,
UBI_VID_STATIC = 2
};
/*
* Volume flags used in the volume table record.
*
* @UBI_VTBL_AUTORESIZE_FLG: auto-resize this volume
* @UBI_VTBL_SKIP_CRC_CHECK_FLG: skip the CRC check done on a static volume at
* open time. Should only be set on volumes that
* are used by upper layers doing this kind of
* check. Main use-case for this flag is
* boot-time reduction
*
* %UBI_VTBL_AUTORESIZE_FLG flag can be set only for one volume in the volume
* table. UBI automatically re-sizes the volume which has this flag and makes
* the volume to be of largest possible size. This means that if after the
* initialization UBI finds out that there are available physical eraseblocks
* present on the device, it automatically appends all of them to the volume
* (the physical eraseblocks reserved for bad eraseblocks handling and other
* reserved physical eraseblocks are not taken). So, if there is a volume with
* the %UBI_VTBL_AUTORESIZE_FLG flag set, the amount of available logical
* eraseblocks will be zero after UBI is loaded, because all of them will be
* reserved for this volume. Note, the %UBI_VTBL_AUTORESIZE_FLG bit is cleared
* after the volume had been initialized.
*
* The auto-resize feature is useful for device production purposes. For
* example, different NAND flash chips may have different amount of initial bad
* eraseblocks, depending of particular chip instance. Manufacturers of NAND
* chips usually guarantee that the amount of initial bad eraseblocks does not
* exceed certain percent, e.g. 2%. When one creates an UBI image which will be
* flashed to the end devices in production, he does not know the exact amount
* of good physical eraseblocks the NAND chip on the device will have, but this
* number is required to calculate the volume sized and put them to the volume
* table of the UBI image. In this case, one of the volumes (e.g., the one
* which will store the root file system) is marked as "auto-resizable", and
* UBI will adjust its size on the first boot if needed.
*
* Note, first UBI reserves some amount of physical eraseblocks for bad
* eraseblock handling, and then re-sizes the volume, not vice-versa. This
* means that the pool of reserved physical eraseblocks will always be present.
*/
enum {
UBI_VTBL_AUTORESIZE_FLG = 0x01,
UBI_VTBL_SKIP_CRC_CHECK_FLG = 0x02,
};
/*
* Compatibility constants used by internal volumes.
*
* @UBI_COMPAT_DELETE: delete this internal volume before anything is written
* to the flash
* @UBI_COMPAT_RO: attach this device in read-only mode
* @UBI_COMPAT_PRESERVE: preserve this internal volume - do not touch its
* physical eraseblocks, don't allow the wear-leveling
* sub-system to move them
* @UBI_COMPAT_REJECT: reject this UBI image
*/
enum {
UBI_COMPAT_DELETE = 1,
UBI_COMPAT_RO = 2,
UBI_COMPAT_PRESERVE = 4,
UBI_COMPAT_REJECT = 5
};
/* Sizes of UBI headers */
#define UBI_EC_HDR_SIZE sizeof(struct ubi_ec_hdr)
#define UBI_VID_HDR_SIZE sizeof(struct ubi_vid_hdr)
/* Sizes of UBI headers without the ending CRC */
#define UBI_EC_HDR_SIZE_CRC (UBI_EC_HDR_SIZE - sizeof(__be32))
#define UBI_VID_HDR_SIZE_CRC (UBI_VID_HDR_SIZE - sizeof(__be32))
/**
* struct ubi_ec_hdr - UBI erase counter header.
* @magic: erase counter header magic number (%UBI_EC_HDR_MAGIC)
* @version: version of UBI implementation which is supposed to accept this
* UBI image
* @padding1: reserved for future, zeroes
* @ec: the erase counter
* @vid_hdr_offset: where the VID header starts
* @data_offset: where the user data start
* @image_seq: image sequence number
* @padding2: reserved for future, zeroes
* @hdr_crc: erase counter header CRC checksum
*
* The erase counter header takes 64 bytes and has a plenty of unused space for
* future usage. The unused fields are zeroed. The @version field is used to
* indicate the version of UBI implementation which is supposed to be able to
* work with this UBI image. If @version is greater than the current UBI
* version, the image is rejected. This may be useful in future if something
* is changed radically. This field is duplicated in the volume identifier
* header.
*
* The @vid_hdr_offset and @data_offset fields contain the offset of the the
* volume identifier header and user data, relative to the beginning of the
* physical eraseblock. These values have to be the same for all physical
* eraseblocks.
*
* The @image_seq field is used to validate a UBI image that has been prepared
* for a UBI device. The @image_seq value can be any value, but it must be the
* same on all eraseblocks. UBI will ensure that all new erase counter headers
* also contain this value, and will check the value when attaching the flash.
* One way to make use of @image_seq is to increase its value by one every time
* an image is flashed over an existing image, then, if the flashing does not
* complete, UBI will detect the error when attaching the media.
*/
struct ubi_ec_hdr {
__be32 magic;
__u8 version;
__u8 padding1[3];
__be64 ec; /* Warning: the current limit is 31-bit anyway! */
__be32 vid_hdr_offset;
__be32 data_offset;
__be32 image_seq;
__u8 padding2[32];
__be32 hdr_crc;
} __packed;
/**
* struct ubi_vid_hdr - on-flash UBI volume identifier header.
* @magic: volume identifier header magic number (%UBI_VID_HDR_MAGIC)
* @version: UBI implementation version which is supposed to accept this UBI
* image (%UBI_VERSION)
* @vol_type: volume type (%UBI_VID_DYNAMIC or %UBI_VID_STATIC)
* @copy_flag: if this logical eraseblock was copied from another physical
* eraseblock (for wear-leveling reasons)
* @compat: compatibility of this volume (%0, %UBI_COMPAT_DELETE,
* %UBI_COMPAT_IGNORE, %UBI_COMPAT_PRESERVE, or %UBI_COMPAT_REJECT)
* @vol_id: ID of this volume
* @lnum: logical eraseblock number
* @padding1: reserved for future, zeroes
* @data_size: how many bytes of data this logical eraseblock contains
* @used_ebs: total number of used logical eraseblocks in this volume
* @data_pad: how many bytes at the end of this physical eraseblock are not
* used
* @data_crc: CRC checksum of the data stored in this logical eraseblock
* @padding2: reserved for future, zeroes
* @sqnum: sequence number
* @padding3: reserved for future, zeroes
* @hdr_crc: volume identifier header CRC checksum
*
* The @sqnum is the value of the global sequence counter at the time when this
* VID header was created. The global sequence counter is incremented each time
* UBI writes a new VID header to the flash, i.e. when it maps a logical
* eraseblock to a new physical eraseblock. The global sequence counter is an
* unsigned 64-bit integer and we assume it never overflows. The @sqnum
* (sequence number) is used to distinguish between older and newer versions of
* logical eraseblocks.
*
* There are 2 situations when there may be more than one physical eraseblock
* corresponding to the same logical eraseblock, i.e., having the same @vol_id
* and @lnum values in the volume identifier header. Suppose we have a logical
* eraseblock L and it is mapped to the physical eraseblock P.
*
* 1. Because UBI may erase physical eraseblocks asynchronously, the following
* situation is possible: L is asynchronously erased, so P is scheduled for
* erasure, then L is written to,i.e. mapped to another physical eraseblock P1,
* so P1 is written to, then an unclean reboot happens. Result - there are 2
* physical eraseblocks P and P1 corresponding to the same logical eraseblock
* L. But P1 has greater sequence number, so UBI picks P1 when it attaches the
* flash.
*
* 2. From time to time UBI moves logical eraseblocks to other physical
* eraseblocks for wear-leveling reasons. If, for example, UBI moves L from P
* to P1, and an unclean reboot happens before P is physically erased, there
* are two physical eraseblocks P and P1 corresponding to L and UBI has to
* select one of them when the flash is attached. The @sqnum field says which
* PEB is the original (obviously P will have lower @sqnum) and the copy. But
* it is not enough to select the physical eraseblock with the higher sequence
* number, because the unclean reboot could have happen in the middle of the
* copying process, so the data in P is corrupted. It is also not enough to
* just select the physical eraseblock with lower sequence number, because the
* data there may be old (consider a case if more data was added to P1 after
* the copying). Moreover, the unclean reboot may happen when the erasure of P
* was just started, so it result in unstable P, which is "mostly" OK, but
* still has unstable bits.
*
* UBI uses the @copy_flag field to indicate that this logical eraseblock is a
* copy. UBI also calculates data CRC when the data is moved and stores it at
* the @data_crc field of the copy (P1). So when UBI needs to pick one physical
* eraseblock of two (P or P1), the @copy_flag of the newer one (P1) is
* examined. If it is cleared, the situation* is simple and the newer one is
* picked. If it is set, the data CRC of the copy (P1) is examined. If the CRC
* checksum is correct, this physical eraseblock is selected (P1). Otherwise
* the older one (P) is selected.
*
* There are 2 sorts of volumes in UBI: user volumes and internal volumes.
* Internal volumes are not seen from outside and are used for various internal
* UBI purposes. In this implementation there is only one internal volume - the
* layout volume. Internal volumes are the main mechanism of UBI extensions.
* For example, in future one may introduce a journal internal volume. Internal
* volumes have their own reserved range of IDs.
*
* The @compat field is only used for internal volumes and contains the "degree
* of their compatibility". It is always zero for user volumes. This field
* provides a mechanism to introduce UBI extensions and to be still compatible
* with older UBI binaries. For example, if someone introduced a journal in
* future, he would probably use %UBI_COMPAT_DELETE compatibility for the
* journal volume. And in this case, older UBI binaries, which know nothing
* about the journal volume, would just delete this volume and work perfectly
* fine. This is similar to what Ext2fs does when it is fed by an Ext3fs image
* - it just ignores the Ext3fs journal.
*
* The @data_crc field contains the CRC checksum of the contents of the logical
* eraseblock if this is a static volume. In case of dynamic volumes, it does
* not contain the CRC checksum as a rule. The only exception is when the
* data of the physical eraseblock was moved by the wear-leveling sub-system,
* then the wear-leveling sub-system calculates the data CRC and stores it in
* the @data_crc field. And of course, the @copy_flag is %in this case.
*
* The @data_size field is used only for static volumes because UBI has to know
* how many bytes of data are stored in this eraseblock. For dynamic volumes,
* this field usually contains zero. The only exception is when the data of the
* physical eraseblock was moved to another physical eraseblock for
* wear-leveling reasons. In this case, UBI calculates CRC checksum of the
* contents and uses both @data_crc and @data_size fields. In this case, the
* @data_size field contains data size.
*
* The @used_ebs field is used only for static volumes and indicates how many
* eraseblocks the data of the volume takes. For dynamic volumes this field is
* not used and always contains zero.
*
* The @data_pad is calculated when volumes are created using the alignment
* parameter. So, effectively, the @data_pad field reduces the size of logical
* eraseblocks of this volume. This is very handy when one uses block-oriented
* software (say, cramfs) on top of the UBI volume.
*/
struct ubi_vid_hdr {
__be32 magic;
__u8 version;
__u8 vol_type;
__u8 copy_flag;
__u8 compat;
__be32 vol_id;
__be32 lnum;
__u8 padding1[4];
__be32 data_size;
__be32 used_ebs;
__be32 data_pad;
__be32 data_crc;
__u8 padding2[4];
__be64 sqnum;
__u8 padding3[12];
__be32 hdr_crc;
} __packed;
/* Internal UBI volumes count */
#define UBI_INT_VOL_COUNT 1
/*
* Starting ID of internal volumes: 0x7fffefff.
* There is reserved room for 4096 internal volumes.
*/
#define UBI_INTERNAL_VOL_START (0x7FFFFFFF - 4096)
/* The layout volume contains the volume table */
#define UBI_LAYOUT_VOLUME_ID UBI_INTERNAL_VOL_START
#define UBI_LAYOUT_VOLUME_TYPE UBI_VID_DYNAMIC
#define UBI_LAYOUT_VOLUME_ALIGN 1
#define UBI_LAYOUT_VOLUME_EBS 2
#define UBI_LAYOUT_VOLUME_NAME "layout volume"
#define UBI_LAYOUT_VOLUME_COMPAT UBI_COMPAT_REJECT
/* The maximum number of volumes per one UBI device */
#define UBI_MAX_VOLUMES 128
/* The maximum volume name length */
#define UBI_VOL_NAME_MAX 127
/* Size of the volume table record */
#define UBI_VTBL_RECORD_SIZE sizeof(struct ubi_vtbl_record)
/* Size of the volume table record without the ending CRC */
#define UBI_VTBL_RECORD_SIZE_CRC (UBI_VTBL_RECORD_SIZE - sizeof(__be32))
/**
* struct ubi_vtbl_record - a record in the volume table.
* @reserved_pebs: how many physical eraseblocks are reserved for this volume
* @alignment: volume alignment
* @data_pad: how many bytes are unused at the end of the each physical
* eraseblock to satisfy the requested alignment
* @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
* @upd_marker: if volume update was started but not finished
* @name_len: volume name length
* @name: the volume name
* @flags: volume flags (%UBI_VTBL_AUTORESIZE_FLG)
* @padding: reserved, zeroes
* @crc: a CRC32 checksum of the record
*
* The volume table records are stored in the volume table, which is stored in
* the layout volume. The layout volume consists of 2 logical eraseblock, each
* of which contains a copy of the volume table (i.e., the volume table is
* duplicated). The volume table is an array of &struct ubi_vtbl_record
* objects indexed by the volume ID.
*
* If the size of the logical eraseblock is large enough to fit
* %UBI_MAX_VOLUMES records, the volume table contains %UBI_MAX_VOLUMES
* records. Otherwise, it contains as many records as it can fit (i.e., size of
* logical eraseblock divided by sizeof(struct ubi_vtbl_record)).
*
* The @upd_marker flag is used to implement volume update. It is set to %1
* before update and set to %0 after the update. So if the update operation was
* interrupted, UBI knows that the volume is corrupted.
*
* The @alignment field is specified when the volume is created and cannot be
* later changed. It may be useful, for example, when a block-oriented file
* system works on top of UBI. The @data_pad field is calculated using the
* logical eraseblock size and @alignment. The alignment must be multiple to the
* minimal flash I/O unit. If @alignment is 1, all the available space of
* the physical eraseblocks is used.
*
* Empty records contain all zeroes and the CRC checksum of those zeroes.
*/
struct ubi_vtbl_record {
__be32 reserved_pebs;
__be32 alignment;
__be32 data_pad;
__u8 vol_type;
__u8 upd_marker;
__be16 name_len;
#ifndef __UBOOT__
__u8 name[UBI_VOL_NAME_MAX+1];
#else
char name[UBI_VOL_NAME_MAX+1];
#endif
__u8 flags;
__u8 padding[23];
__be32 crc;
} __packed;
/* UBI fastmap on-flash data structures */
#define UBI_FM_SB_VOLUME_ID (UBI_LAYOUT_VOLUME_ID + 1)
#define UBI_FM_DATA_VOLUME_ID (UBI_LAYOUT_VOLUME_ID + 2)
/* fastmap on-flash data structure format version */
#define UBI_FM_FMT_VERSION 1
#define UBI_FM_SB_MAGIC 0x7B11D69F
#define UBI_FM_HDR_MAGIC 0xD4B82EF7
#define UBI_FM_VHDR_MAGIC 0xFA370ED1
#define UBI_FM_POOL_MAGIC 0x67AF4D08
#define UBI_FM_EBA_MAGIC 0xf0c040a8
/* A fastmap supber block can be located between PEB 0 and
* UBI_FM_MAX_START */
#define UBI_FM_MAX_START 64
/* A fastmap can use up to UBI_FM_MAX_BLOCKS PEBs */
#define UBI_FM_MAX_BLOCKS 32
/* 5% of the total number of PEBs have to be scanned while attaching
* from a fastmap.
* But the size of this pool is limited to be between UBI_FM_MIN_POOL_SIZE and
* UBI_FM_MAX_POOL_SIZE */
#define UBI_FM_MIN_POOL_SIZE 8
#define UBI_FM_MAX_POOL_SIZE 256
/**
* struct ubi_fm_sb - UBI fastmap super block
* @magic: fastmap super block magic number (%UBI_FM_SB_MAGIC)
* @version: format version of this fastmap
* @data_crc: CRC over the fastmap data
* @used_blocks: number of PEBs used by this fastmap
* @block_loc: an array containing the location of all PEBs of the fastmap
* @block_ec: the erase counter of each used PEB
* @sqnum: highest sequence number value at the time while taking the fastmap
*
*/
struct ubi_fm_sb {
__be32 magic;
__u8 version;
__u8 padding1[3];
__be32 data_crc;
__be32 used_blocks;
__be32 block_loc[UBI_FM_MAX_BLOCKS];
__be32 block_ec[UBI_FM_MAX_BLOCKS];
__be64 sqnum;
__u8 padding2[32];
} __packed;
/**
* struct ubi_fm_hdr - header of the fastmap data set
* @magic: fastmap header magic number (%UBI_FM_HDR_MAGIC)
* @free_peb_count: number of free PEBs known by this fastmap
* @used_peb_count: number of used PEBs known by this fastmap
* @scrub_peb_count: number of to be scrubbed PEBs known by this fastmap
* @bad_peb_count: number of bad PEBs known by this fastmap
* @erase_peb_count: number of bad PEBs which have to be erased
* @vol_count: number of UBI volumes known by this fastmap
*/
struct ubi_fm_hdr {
__be32 magic;
__be32 free_peb_count;
__be32 used_peb_count;
__be32 scrub_peb_count;
__be32 bad_peb_count;
__be32 erase_peb_count;
__be32 vol_count;
__u8 padding[4];
} __packed;
/* struct ubi_fm_hdr is followed by two struct ubi_fm_scan_pool */
/**
* struct ubi_fm_scan_pool - Fastmap pool PEBs to be scanned while attaching
* @magic: pool magic numer (%UBI_FM_POOL_MAGIC)
* @size: current pool size
* @max_size: maximal pool size
* @pebs: an array containing the location of all PEBs in this pool
*/
struct ubi_fm_scan_pool {
__be32 magic;
__be16 size;
__be16 max_size;
__be32 pebs[UBI_FM_MAX_POOL_SIZE];
__be32 padding[4];
} __packed;
/* ubi_fm_scan_pool is followed by nfree+nused struct ubi_fm_ec records */
/**
* struct ubi_fm_ec - stores the erase counter of a PEB
* @pnum: PEB number
* @ec: ec of this PEB
*/
struct ubi_fm_ec {
__be32 pnum;
__be32 ec;
} __packed;
/**
* struct ubi_fm_volhdr - Fastmap volume header
* it identifies the start of an eba table
* @magic: Fastmap volume header magic number (%UBI_FM_VHDR_MAGIC)
* @vol_id: volume id of the fastmapped volume
* @vol_type: type of the fastmapped volume
* @data_pad: data_pad value of the fastmapped volume
* @used_ebs: number of used LEBs within this volume
* @last_eb_bytes: number of bytes used in the last LEB
*/
struct ubi_fm_volhdr {
__be32 magic;
__be32 vol_id;
__u8 vol_type;
__u8 padding1[3];
__be32 data_pad;
__be32 used_ebs;
__be32 last_eb_bytes;
__u8 padding2[8];
} __packed;
/* struct ubi_fm_volhdr is followed by one struct ubi_fm_eba records */
/**
* struct ubi_fm_eba - denotes an association beween a PEB and LEB
* @magic: EBA table magic number
* @reserved_pebs: number of table entries
* @pnum: PEB number of LEB (LEB is the index)
*/
struct ubi_fm_eba {
__be32 magic;
__be32 reserved_pebs;
__be32 pnum[0];
} __packed;
#endif /* !__UBI_MEDIA_H__ */
source/bootloader/u-boot-2020.01/drivers/mtd/ubi/ubi.h
+1127
View File
File diff suppressed because it is too large Load Diff
source/bootloader/u-boot-2020.01/drivers/mtd/ubi/upd.c
+431
View File
@@ -0,0 +1,431 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) International Business Machines Corp., 2006
* Copyright (c) Nokia Corporation, 2006
*
* Author: Artem Bityutskiy (Битюцкий Артём)
*
* Jan 2007: Alexander Schmidt, hacked per-volume update.
*/
/*
* This file contains implementation of the volume update and atomic LEB change
* functionality.
*
* The update operation is based on the per-volume update marker which is
* stored in the volume table. The update marker is set before the update
* starts, and removed after the update has been finished. So if the update was
* interrupted by an unclean re-boot or due to some other reasons, the update
* marker stays on the flash media and UBI finds it when it attaches the MTD
* device next time. If the update marker is set for a volume, the volume is
* treated as damaged and most I/O operations are prohibited. Only a new update
* operation is allowed.
*
* Note, in general it is possible to implement the update operation as a
* transaction with a roll-back capability.
*/
#ifndef __UBOOT__
#include <linux/uaccess.h>
#else
#include <div64.h>
#include <ubi_uboot.h>
#endif
#include <linux/err.h>
#include <linux/math64.h>
#include "ubi.h"
/**
* set_update_marker - set update marker.
* @ubi: UBI device description object
* @vol: volume description object
*
* This function sets the update marker flag for volume @vol. Returns zero
* in case of success and a negative error code in case of failure.
*/
static int set_update_marker(struct ubi_device *ubi, struct ubi_volume *vol)
{
int err;
struct ubi_vtbl_record vtbl_rec;
dbg_gen("set update marker for volume %d", vol->vol_id);
if (vol->upd_marker) {
ubi_assert(ubi->vtbl[vol->vol_id].upd_marker);
dbg_gen("already set");
return 0;
}
vtbl_rec = ubi->vtbl[vol->vol_id];
vtbl_rec.upd_marker = 1;
mutex_lock(&ubi->device_mutex);
err = ubi_change_vtbl_record(ubi, vol->vol_id, &vtbl_rec);
vol->upd_marker = 1;
mutex_unlock(&ubi->device_mutex);
return err;
}
/**
* clear_update_marker - clear update marker.
* @ubi: UBI device description object
* @vol: volume description object
* @bytes: new data size in bytes
*
* This function clears the update marker for volume @vol, sets new volume
* data size and clears the "corrupted" flag (static volumes only). Returns
* zero in case of success and a negative error code in case of failure.
*/
static int clear_update_marker(struct ubi_device *ubi, struct ubi_volume *vol,
long long bytes)
{
int err;
struct ubi_vtbl_record vtbl_rec;
dbg_gen("clear update marker for volume %d", vol->vol_id);
vtbl_rec = ubi->vtbl[vol->vol_id];
ubi_assert(vol->upd_marker && vtbl_rec.upd_marker);
vtbl_rec.upd_marker = 0;
if (vol->vol_type == UBI_STATIC_VOLUME) {
vol->corrupted = 0;
vol->used_bytes = bytes;
vol->used_ebs = div_u64_rem(bytes, vol->usable_leb_size,
&vol->last_eb_bytes);
if (vol->last_eb_bytes)
vol->used_ebs += 1;
else
vol->last_eb_bytes = vol->usable_leb_size;
}
mutex_lock(&ubi->device_mutex);
err = ubi_change_vtbl_record(ubi, vol->vol_id, &vtbl_rec);
vol->upd_marker = 0;
mutex_unlock(&ubi->device_mutex);
return err;
}
/**
* ubi_start_update - start volume update.
* @ubi: UBI device description object
* @vol: volume description object
* @bytes: update bytes
*
* This function starts volume update operation. If @bytes is zero, the volume
* is just wiped out. Returns zero in case of success and a negative error code
* in case of failure.
*/
int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol,
long long bytes)
{
int i, err;
dbg_gen("start update of volume %d, %llu bytes", vol->vol_id, bytes);
ubi_assert(!vol->updating && !vol->changing_leb);
vol->updating = 1;
vol->upd_buf = vmalloc(ubi->leb_size);
if (!vol->upd_buf)
return -ENOMEM;
err = set_update_marker(ubi, vol);
if (err)
return err;
/* Before updating - wipe out the volume */
for (i = 0; i < vol->reserved_pebs; i++) {
err = ubi_eba_unmap_leb(ubi, vol, i);
if (err)
return err;
}
if (bytes == 0) {
err = ubi_wl_flush(ubi, UBI_ALL, UBI_ALL);
if (err)
return err;
err = clear_update_marker(ubi, vol, 0);
if (err)
return err;
vfree(vol->upd_buf);
vol->updating = 0;
return 0;
}
vol->upd_ebs = div_u64(bytes + vol->usable_leb_size - 1,
vol->usable_leb_size);
vol->upd_bytes = bytes;
vol->upd_received = 0;
return 0;
}
/**
* ubi_start_leb_change - start atomic LEB change.
* @ubi: UBI device description object
* @vol: volume description object
* @req: operation request
*
* This function starts atomic LEB change operation. Returns zero in case of
* success and a negative error code in case of failure.
*/
int ubi_start_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
const struct ubi_leb_change_req *req)
{
ubi_assert(!vol->updating && !vol->changing_leb);
dbg_gen("start changing LEB %d:%d, %u bytes",
vol->vol_id, req->lnum, req->bytes);
if (req->bytes == 0)
return ubi_eba_atomic_leb_change(ubi, vol, req->lnum, NULL, 0);
vol->upd_bytes = req->bytes;
vol->upd_received = 0;
vol->changing_leb = 1;
vol->ch_lnum = req->lnum;
vol->upd_buf = vmalloc(req->bytes);
if (!vol->upd_buf)
return -ENOMEM;
return 0;
}
/**
* write_leb - write update data.
* @ubi: UBI device description object
* @vol: volume description object
* @lnum: logical eraseblock number
* @buf: data to write
* @len: data size
* @used_ebs: how many logical eraseblocks will this volume contain (static
* volumes only)
*
* This function writes update data to corresponding logical eraseblock. In
* case of dynamic volume, this function checks if the data contains 0xFF bytes
* at the end. If yes, the 0xFF bytes are cut and not written. So if the whole
* buffer contains only 0xFF bytes, the LEB is left unmapped.
*
* The reason why we skip the trailing 0xFF bytes in case of dynamic volume is
* that we want to make sure that more data may be appended to the logical
* eraseblock in future. Indeed, writing 0xFF bytes may have side effects and
* this PEB won't be writable anymore. So if one writes the file-system image
* to the UBI volume where 0xFFs mean free space - UBI makes sure this free
* space is writable after the update.
*
* We do not do this for static volumes because they are read-only. But this
* also cannot be done because we have to store per-LEB CRC and the correct
* data length.
*
* This function returns zero in case of success and a negative error code in
* case of failure.
*/
static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
void *buf, int len, int used_ebs)
{
int err;
if (vol->vol_type == UBI_DYNAMIC_VOLUME) {
int l = ALIGN(len, ubi->min_io_size);
memset(buf + len, 0xFF, l - len);
len = ubi_calc_data_len(ubi, buf, l);
if (len == 0) {
dbg_gen("all %d bytes contain 0xFF - skip", len);
return 0;
}
err = ubi_eba_write_leb(ubi, vol, lnum, buf, 0, len);
} else {
/*
* When writing static volume, and this is the last logical
* eraseblock, the length (@len) does not have to be aligned to
* the minimal flash I/O unit. The 'ubi_eba_write_leb_st()'
* function accepts exact (unaligned) length and stores it in
* the VID header. And it takes care of proper alignment by
* padding the buffer. Here we just make sure the padding will
* contain zeros, not random trash.
*/
memset(buf + len, 0, vol->usable_leb_size - len);
err = ubi_eba_write_leb_st(ubi, vol, lnum, buf, len, used_ebs);
}
return err;
}
/**
* ubi_more_update_data - write more update data.
* @ubi: UBI device description object
* @vol: volume description object
* @buf: write data (user-space memory buffer)
* @count: how much bytes to write
*
* This function writes more data to the volume which is being updated. It may
* be called arbitrary number of times until all the update data arriveis. This
* function returns %0 in case of success, number of bytes written during the
* last call if the whole volume update has been successfully finished, and a
* negative error code in case of failure.
*/
int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol,
const void __user *buf, int count)
{
#ifndef __UBOOT__
int lnum, offs, err = 0, len, to_write = count;
#else
int lnum, err = 0, len, to_write = count;
u32 offs;
#endif
dbg_gen("write %d of %lld bytes, %lld already passed",
count, vol->upd_bytes, vol->upd_received);
if (ubi->ro_mode)
return -EROFS;
lnum = div_u64_rem(vol->upd_received, vol->usable_leb_size, &offs);
if (vol->upd_received + count > vol->upd_bytes)
to_write = count = vol->upd_bytes - vol->upd_received;
/*
* When updating volumes, we accumulate whole logical eraseblock of
* data and write it at once.
*/
if (offs != 0) {
/*
* This is a write to the middle of the logical eraseblock. We
* copy the data to our update buffer and wait for more data or
* flush it if the whole eraseblock is written or the update
* is finished.
*/
len = vol->usable_leb_size - offs;
if (len > count)
len = count;
err = copy_from_user(vol->upd_buf + offs, buf, len);
if (err)
return -EFAULT;
if (offs + len == vol->usable_leb_size ||
vol->upd_received + len == vol->upd_bytes) {
int flush_len = offs + len;
/*
* OK, we gathered either the whole eraseblock or this
* is the last chunk, it's time to flush the buffer.
*/
ubi_assert(flush_len <= vol->usable_leb_size);
err = write_leb(ubi, vol, lnum, vol->upd_buf, flush_len,
vol->upd_ebs);
if (err)
return err;
}
vol->upd_received += len;
count -= len;
buf += len;
lnum += 1;
}
/*
* If we've got more to write, let's continue. At this point we know we
* are starting from the beginning of an eraseblock.
*/
while (count) {
if (count > vol->usable_leb_size)
len = vol->usable_leb_size;
else
len = count;
err = copy_from_user(vol->upd_buf, buf, len);
if (err)
return -EFAULT;
if (len == vol->usable_leb_size ||
vol->upd_received + len == vol->upd_bytes) {
err = write_leb(ubi, vol, lnum, vol->upd_buf,
len, vol->upd_ebs);
if (err)
break;
}
vol->upd_received += len;
count -= len;
lnum += 1;
buf += len;
}
ubi_assert(vol->upd_received <= vol->upd_bytes);
if (vol->upd_received == vol->upd_bytes) {
err = ubi_wl_flush(ubi, UBI_ALL, UBI_ALL);
if (err)
return err;
/* The update is finished, clear the update marker */
err = clear_update_marker(ubi, vol, vol->upd_bytes);
if (err)
return err;
vol->updating = 0;
err = to_write;
vfree(vol->upd_buf);
}
return err;
}
/**
* ubi_more_leb_change_data - accept more data for atomic LEB change.
* @ubi: UBI device description object
* @vol: volume description object
* @buf: write data (user-space memory buffer)
* @count: how much bytes to write
*
* This function accepts more data to the volume which is being under the
* "atomic LEB change" operation. It may be called arbitrary number of times
* until all data arrives. This function returns %0 in case of success, number
* of bytes written during the last call if the whole "atomic LEB change"
* operation has been successfully finished, and a negative error code in case
* of failure.
*/
int ubi_more_leb_change_data(struct ubi_device *ubi, struct ubi_volume *vol,
const void __user *buf, int count)
{
int err;
dbg_gen("write %d of %lld bytes, %lld already passed",
count, vol->upd_bytes, vol->upd_received);
if (ubi->ro_mode)
return -EROFS;
if (vol->upd_received + count > vol->upd_bytes)
count = vol->upd_bytes - vol->upd_received;
err = copy_from_user(vol->upd_buf + vol->upd_received, buf, count);
if (err)
return -EFAULT;
vol->upd_received += count;
if (vol->upd_received == vol->upd_bytes) {
int len = ALIGN((int)vol->upd_bytes, ubi->min_io_size);
memset(vol->upd_buf + vol->upd_bytes, 0xFF,
len - vol->upd_bytes);
len = ubi_calc_data_len(ubi, vol->upd_buf, len);
err = ubi_eba_atomic_leb_change(ubi, vol, vol->ch_lnum,
vol->upd_buf, len);
if (err)
return err;
}
ubi_assert(vol->upd_received <= vol->upd_bytes);
if (vol->upd_received == vol->upd_bytes) {
vol->changing_leb = 0;
err = count;
vfree(vol->upd_buf);
}
return err;
}
source/bootloader/u-boot-2020.01/drivers/mtd/ubi/vmt.c
+820
View File
@@ -0,0 +1,820 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) International Business Machines Corp., 2006
*
* Author: Artem Bityutskiy (Битюцкий Артём)
*/
/*
* This file contains implementation of volume creation, deletion, updating and
* resizing.
*/
#ifndef __UBOOT__
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/export.h>
#else
#include <div64.h>
#include <ubi_uboot.h>
#endif
#include <linux/math64.h>
#include "ubi.h"
static int self_check_volumes(struct ubi_device *ubi);
#ifndef __UBOOT__
static ssize_t vol_attribute_show(struct device *dev,
struct device_attribute *attr, char *buf);
/* Device attributes corresponding to files in '/<sysfs>/class/ubi/ubiX_Y' */
static struct device_attribute attr_vol_reserved_ebs =
__ATTR(reserved_ebs, S_IRUGO, vol_attribute_show, NULL);
static struct device_attribute attr_vol_type =
__ATTR(type, S_IRUGO, vol_attribute_show, NULL);
static struct device_attribute attr_vol_name =
__ATTR(name, S_IRUGO, vol_attribute_show, NULL);
static struct device_attribute attr_vol_corrupted =
__ATTR(corrupted, S_IRUGO, vol_attribute_show, NULL);
static struct device_attribute attr_vol_alignment =
__ATTR(alignment, S_IRUGO, vol_attribute_show, NULL);
static struct device_attribute attr_vol_usable_eb_size =
__ATTR(usable_eb_size, S_IRUGO, vol_attribute_show, NULL);
static struct device_attribute attr_vol_data_bytes =
__ATTR(data_bytes, S_IRUGO, vol_attribute_show, NULL);
static struct device_attribute attr_vol_upd_marker =
__ATTR(upd_marker, S_IRUGO, vol_attribute_show, NULL);
/*
* "Show" method for files in '/<sysfs>/class/ubi/ubiX_Y/'.
*
* Consider a situation:
* A. process 1 opens a sysfs file related to volume Y, say
* /<sysfs>/class/ubi/ubiX_Y/reserved_ebs;
* B. process 2 removes volume Y;
* C. process 1 starts reading the /<sysfs>/class/ubi/ubiX_Y/reserved_ebs file;
*
* In this situation, this function will return %-ENODEV because it will find
* out that the volume was removed from the @ubi->volumes array.
*/
static ssize_t vol_attribute_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
int ret;
struct ubi_volume *vol = container_of(dev, struct ubi_volume, dev);
struct ubi_device *ubi;
ubi = ubi_get_device(vol->ubi->ubi_num);
if (!ubi)
return -ENODEV;
spin_lock(&ubi->volumes_lock);
if (!ubi->volumes[vol->vol_id]) {
spin_unlock(&ubi->volumes_lock);
ubi_put_device(ubi);
return -ENODEV;
}
/* Take a reference to prevent volume removal */
vol->ref_count += 1;
spin_unlock(&ubi->volumes_lock);
if (attr == &attr_vol_reserved_ebs)
ret = sprintf(buf, "%d\n", vol->reserved_pebs);
else if (attr == &attr_vol_type) {
const char *tp;
if (vol->vol_type == UBI_DYNAMIC_VOLUME)
tp = "dynamic";
else
tp = "static";
ret = sprintf(buf, "%s\n", tp);
} else if (attr == &attr_vol_name)
ret = sprintf(buf, "%s\n", vol->name);
else if (attr == &attr_vol_corrupted)
ret = sprintf(buf, "%d\n", vol->corrupted);
else if (attr == &attr_vol_alignment)
ret = sprintf(buf, "%d\n", vol->alignment);
else if (attr == &attr_vol_usable_eb_size)
ret = sprintf(buf, "%d\n", vol->usable_leb_size);
else if (attr == &attr_vol_data_bytes)
ret = sprintf(buf, "%lld\n", vol->used_bytes);
else if (attr == &attr_vol_upd_marker)
ret = sprintf(buf, "%d\n", vol->upd_marker);
else
/* This must be a bug */
ret = -EINVAL;
/* We've done the operation, drop volume and UBI device references */
spin_lock(&ubi->volumes_lock);
vol->ref_count -= 1;
ubi_assert(vol->ref_count >= 0);
spin_unlock(&ubi->volumes_lock);
ubi_put_device(ubi);
return ret;
}
static struct attribute *volume_dev_attrs[] = {
&attr_vol_reserved_ebs.attr,
&attr_vol_type.attr,
&attr_vol_name.attr,
&attr_vol_corrupted.attr,
&attr_vol_alignment.attr,
&attr_vol_usable_eb_size.attr,
&attr_vol_data_bytes.attr,
&attr_vol_upd_marker.attr,
NULL
};
ATTRIBUTE_GROUPS(volume_dev);
#endif
/* Release method for volume devices */
static void vol_release(struct device *dev)
{
struct ubi_volume *vol = container_of(dev, struct ubi_volume, dev);
kfree(vol->eba_tbl);
kfree(vol);
}
/**
* ubi_create_volume - create volume.
* @ubi: UBI device description object
* @req: volume creation request
*
* This function creates volume described by @req. If @req->vol_id id
* %UBI_VOL_NUM_AUTO, this function automatically assign ID to the new volume
* and saves it in @req->vol_id. Returns zero in case of success and a negative
* error code in case of failure. Note, the caller has to have the
* @ubi->device_mutex locked.
*/
int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
{
int i, err, vol_id = req->vol_id, do_free = 1;
struct ubi_volume *vol;
struct ubi_vtbl_record vtbl_rec;
dev_t dev;
if (ubi->ro_mode)
return -EROFS;
vol = kzalloc(sizeof(struct ubi_volume), GFP_KERNEL);
if (!vol)
return -ENOMEM;
if (req->flags & UBI_VOL_SKIP_CRC_CHECK_FLG)
vol->skip_check = 1;
spin_lock(&ubi->volumes_lock);
if (vol_id == UBI_VOL_NUM_AUTO) {
/* Find unused volume ID */
dbg_gen("search for vacant volume ID");
for (i = 0; i < ubi->vtbl_slots; i++)
if (!ubi->volumes[i]) {
vol_id = i;
break;
}
if (vol_id == UBI_VOL_NUM_AUTO) {
ubi_err(ubi, "out of volume IDs");
err = -ENFILE;
goto out_unlock;
}
req->vol_id = vol_id;
}
dbg_gen("create device %d, volume %d, %llu bytes, type %d, name %s",
ubi->ubi_num, vol_id, (unsigned long long)req->bytes,
(int)req->vol_type, req->name);
/* Ensure that this volume does not exist */
err = -EEXIST;
if (ubi->volumes[vol_id]) {
ubi_err(ubi, "volume %d already exists", vol_id);
goto out_unlock;
}
/* Ensure that the name is unique */
for (i = 0; i < ubi->vtbl_slots; i++)
if (ubi->volumes[i] &&
ubi->volumes[i]->name_len == req->name_len &&
!strcmp(ubi->volumes[i]->name, req->name)) {
ubi_err(ubi, "volume \"%s\" exists (ID %d)",
req->name, i);
goto out_unlock;
}
/* Calculate how many eraseblocks are requested */
vol->usable_leb_size = ubi->leb_size - ubi->leb_size % req->alignment;
vol->reserved_pebs = div_u64(req->bytes + vol->usable_leb_size - 1,
vol->usable_leb_size);
/* Reserve physical eraseblocks */
if (vol->reserved_pebs > ubi->avail_pebs) {
ubi_err(ubi, "not enough PEBs, only %d available",
ubi->avail_pebs);
if (ubi->corr_peb_count)
ubi_err(ubi, "%d PEBs are corrupted and not used",
ubi->corr_peb_count);
err = -ENOSPC;
goto out_unlock;
}
ubi->avail_pebs -= vol->reserved_pebs;
ubi->rsvd_pebs += vol->reserved_pebs;
spin_unlock(&ubi->volumes_lock);
vol->vol_id = vol_id;
vol->alignment = req->alignment;
vol->data_pad = ubi->leb_size % vol->alignment;
vol->vol_type = req->vol_type;
vol->name_len = req->name_len;
memcpy(vol->name, req->name, vol->name_len);
vol->ubi = ubi;
/*
* Finish all pending erases because there may be some LEBs belonging
* to the same volume ID.
*/
err = ubi_wl_flush(ubi, vol_id, UBI_ALL);
if (err)
goto out_acc;
vol->eba_tbl = kmalloc(vol->reserved_pebs * sizeof(int), GFP_KERNEL);
if (!vol->eba_tbl) {
err = -ENOMEM;
goto out_acc;
}
for (i = 0; i < vol->reserved_pebs; i++)
vol->eba_tbl[i] = UBI_LEB_UNMAPPED;
if (vol->vol_type == UBI_DYNAMIC_VOLUME) {
vol->used_ebs = vol->reserved_pebs;
vol->last_eb_bytes = vol->usable_leb_size;
vol->used_bytes =
(long long)vol->used_ebs * vol->usable_leb_size;
} else {
vol->used_ebs = div_u64_rem(vol->used_bytes,
vol->usable_leb_size,
&vol->last_eb_bytes);
if (vol->last_eb_bytes != 0)
vol->used_ebs += 1;
else
vol->last_eb_bytes = vol->usable_leb_size;
}
/* Register character device for the volume */
cdev_init(&vol->cdev, &ubi_vol_cdev_operations);
vol->cdev.owner = THIS_MODULE;
dev = MKDEV(MAJOR(ubi->cdev.dev), vol_id + 1);
err = cdev_add(&vol->cdev, dev, 1);
if (err) {
ubi_err(ubi, "cannot add character device");
goto out_mapping;
}
vol->dev.release = vol_release;
vol->dev.parent = &ubi->dev;
vol->dev.devt = dev;
#ifndef __UBOOT__
vol->dev.class = &ubi_class;
vol->dev.groups = volume_dev_groups;
#endif
dev_set_name(&vol->dev, "%s_%d", ubi->ubi_name, vol->vol_id);
err = device_register(&vol->dev);
if (err) {
ubi_err(ubi, "cannot register device");
goto out_cdev;
}
/* Fill volume table record */
memset(&vtbl_rec, 0, sizeof(struct ubi_vtbl_record));
vtbl_rec.reserved_pebs = cpu_to_be32(vol->reserved_pebs);
vtbl_rec.alignment = cpu_to_be32(vol->alignment);
vtbl_rec.data_pad = cpu_to_be32(vol->data_pad);
vtbl_rec.name_len = cpu_to_be16(vol->name_len);
if (vol->vol_type == UBI_DYNAMIC_VOLUME)
vtbl_rec.vol_type = UBI_VID_DYNAMIC;
else
vtbl_rec.vol_type = UBI_VID_STATIC;
if (vol->skip_check)
vtbl_rec.flags |= UBI_VTBL_SKIP_CRC_CHECK_FLG;
memcpy(vtbl_rec.name, vol->name, vol->name_len);
err = ubi_change_vtbl_record(ubi, vol_id, &vtbl_rec);
if (err)
goto out_sysfs;
spin_lock(&ubi->volumes_lock);
ubi->volumes[vol_id] = vol;
ubi->vol_count += 1;
spin_unlock(&ubi->volumes_lock);
ubi_volume_notify(ubi, vol, UBI_VOLUME_ADDED);
self_check_volumes(ubi);
return err;
out_sysfs:
/*
* We have registered our device, we should not free the volume
* description object in this function in case of an error - it is
* freed by the release function.
*
* Get device reference to prevent the release function from being
* called just after sysfs has been closed.
*/
do_free = 0;
get_device(&vol->dev);
device_unregister(&vol->dev);
out_cdev:
cdev_del(&vol->cdev);
out_mapping:
if (do_free)
kfree(vol->eba_tbl);
out_acc:
spin_lock(&ubi->volumes_lock);
ubi->rsvd_pebs -= vol->reserved_pebs;
ubi->avail_pebs += vol->reserved_pebs;
out_unlock:
spin_unlock(&ubi->volumes_lock);
if (do_free)
kfree(vol);
else
put_device(&vol->dev);
ubi_err(ubi, "cannot create volume %d, error %d", vol_id, err);
return err;
}
/**
* ubi_remove_volume - remove volume.
* @desc: volume descriptor
* @no_vtbl: do not change volume table if not zero
*
* This function removes volume described by @desc. The volume has to be opened
* in "exclusive" mode. Returns zero in case of success and a negative error
* code in case of failure. The caller has to have the @ubi->device_mutex
* locked.
*/
int ubi_remove_volume(struct ubi_volume_desc *desc, int no_vtbl)
{
struct ubi_volume *vol = desc->vol;
struct ubi_device *ubi = vol->ubi;
int i, err, vol_id = vol->vol_id, reserved_pebs = vol->reserved_pebs;
dbg_gen("remove device %d, volume %d", ubi->ubi_num, vol_id);
ubi_assert(desc->mode == UBI_EXCLUSIVE);
ubi_assert(vol == ubi->volumes[vol_id]);
if (ubi->ro_mode)
return -EROFS;
spin_lock(&ubi->volumes_lock);
if (vol->ref_count > 1) {
/*
* The volume is busy, probably someone is reading one of its
* sysfs files.
*/
err = -EBUSY;
goto out_unlock;
}
ubi->volumes[vol_id] = NULL;
spin_unlock(&ubi->volumes_lock);
if (!no_vtbl) {
err = ubi_change_vtbl_record(ubi, vol_id, NULL);
if (err)
goto out_err;
}
for (i = 0; i < vol->reserved_pebs; i++) {
err = ubi_eba_unmap_leb(ubi, vol, i);
if (err)
goto out_err;
}
cdev_del(&vol->cdev);
device_unregister(&vol->dev);
spin_lock(&ubi->volumes_lock);
ubi->rsvd_pebs -= reserved_pebs;
ubi->avail_pebs += reserved_pebs;
ubi_update_reserved(ubi);
ubi->vol_count -= 1;
spin_unlock(&ubi->volumes_lock);
ubi_volume_notify(ubi, vol, UBI_VOLUME_REMOVED);
if (!no_vtbl)
self_check_volumes(ubi);
return err;
out_err:
ubi_err(ubi, "cannot remove volume %d, error %d", vol_id, err);
spin_lock(&ubi->volumes_lock);
ubi->volumes[vol_id] = vol;
out_unlock:
spin_unlock(&ubi->volumes_lock);
return err;
}
/**
* ubi_resize_volume - re-size volume.
* @desc: volume descriptor
* @reserved_pebs: new size in physical eraseblocks
*
* This function re-sizes the volume and returns zero in case of success, and a
* negative error code in case of failure. The caller has to have the
* @ubi->device_mutex locked.
*/
int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs)
{
int i, err, pebs, *new_mapping;
struct ubi_volume *vol = desc->vol;
struct ubi_device *ubi = vol->ubi;
struct ubi_vtbl_record vtbl_rec;
int vol_id = vol->vol_id;
if (ubi->ro_mode)
return -EROFS;
dbg_gen("re-size device %d, volume %d to from %d to %d PEBs",
ubi->ubi_num, vol_id, vol->reserved_pebs, reserved_pebs);
if (vol->vol_type == UBI_STATIC_VOLUME &&
reserved_pebs < vol->used_ebs) {
ubi_err(ubi, "too small size %d, %d LEBs contain data",
reserved_pebs, vol->used_ebs);
return -EINVAL;
}
/* If the size is the same, we have nothing to do */
if (reserved_pebs == vol->reserved_pebs)
return 0;
new_mapping = kmalloc(reserved_pebs * sizeof(int), GFP_KERNEL);
if (!new_mapping)
return -ENOMEM;
for (i = 0; i < reserved_pebs; i++)
new_mapping[i] = UBI_LEB_UNMAPPED;
spin_lock(&ubi->volumes_lock);
if (vol->ref_count > 1) {
spin_unlock(&ubi->volumes_lock);
err = -EBUSY;
goto out_free;
}
spin_unlock(&ubi->volumes_lock);
/* Reserve physical eraseblocks */
pebs = reserved_pebs - vol->reserved_pebs;
if (pebs > 0) {
spin_lock(&ubi->volumes_lock);
if (pebs > ubi->avail_pebs) {
ubi_err(ubi, "not enough PEBs: requested %d, available %d",
pebs, ubi->avail_pebs);
if (ubi->corr_peb_count)
ubi_err(ubi, "%d PEBs are corrupted and not used",
ubi->corr_peb_count);
spin_unlock(&ubi->volumes_lock);
err = -ENOSPC;
goto out_free;
}
ubi->avail_pebs -= pebs;
ubi->rsvd_pebs += pebs;
for (i = 0; i < vol->reserved_pebs; i++)
new_mapping[i] = vol->eba_tbl[i];
kfree(vol->eba_tbl);
vol->eba_tbl = new_mapping;
spin_unlock(&ubi->volumes_lock);
}
/* Change volume table record */
vtbl_rec = ubi->vtbl[vol_id];
vtbl_rec.reserved_pebs = cpu_to_be32(reserved_pebs);
err = ubi_change_vtbl_record(ubi, vol_id, &vtbl_rec);
if (err)
goto out_acc;
if (pebs < 0) {
for (i = 0; i < -pebs; i++) {
err = ubi_eba_unmap_leb(ubi, vol, reserved_pebs + i);
if (err)
goto out_acc;
}
spin_lock(&ubi->volumes_lock);
ubi->rsvd_pebs += pebs;
ubi->avail_pebs -= pebs;
ubi_update_reserved(ubi);
for (i = 0; i < reserved_pebs; i++)
new_mapping[i] = vol->eba_tbl[i];
kfree(vol->eba_tbl);
vol->eba_tbl = new_mapping;
spin_unlock(&ubi->volumes_lock);
}
vol->reserved_pebs = reserved_pebs;
if (vol->vol_type == UBI_DYNAMIC_VOLUME) {
vol->used_ebs = reserved_pebs;
vol->last_eb_bytes = vol->usable_leb_size;
vol->used_bytes =
(long long)vol->used_ebs * vol->usable_leb_size;
}
ubi_volume_notify(ubi, vol, UBI_VOLUME_RESIZED);
self_check_volumes(ubi);
return err;
out_acc:
if (pebs > 0) {
spin_lock(&ubi->volumes_lock);
ubi->rsvd_pebs -= pebs;
ubi->avail_pebs += pebs;
spin_unlock(&ubi->volumes_lock);
}
out_free:
kfree(new_mapping);
return err;
}
/**
* ubi_rename_volumes - re-name UBI volumes.
* @ubi: UBI device description object
* @rename_list: list of &struct ubi_rename_entry objects
*
* This function re-names or removes volumes specified in the re-name list.
* Returns zero in case of success and a negative error code in case of
* failure.
*/
int ubi_rename_volumes(struct ubi_device *ubi, struct list_head *rename_list)
{
int err;
struct ubi_rename_entry *re;
err = ubi_vtbl_rename_volumes(ubi, rename_list);
if (err)
return err;
list_for_each_entry(re, rename_list, list) {
if (re->remove) {
err = ubi_remove_volume(re->desc, 1);
if (err)
break;
} else {
struct ubi_volume *vol = re->desc->vol;
spin_lock(&ubi->volumes_lock);
vol->name_len = re->new_name_len;
memcpy(vol->name, re->new_name, re->new_name_len + 1);
spin_unlock(&ubi->volumes_lock);
ubi_volume_notify(ubi, vol, UBI_VOLUME_RENAMED);
}
}
if (!err)
self_check_volumes(ubi);
return err;
}
/**
* ubi_add_volume - add volume.
* @ubi: UBI device description object
* @vol: volume description object
*
* This function adds an existing volume and initializes all its data
* structures. Returns zero in case of success and a negative error code in
* case of failure.
*/
int ubi_add_volume(struct ubi_device *ubi, struct ubi_volume *vol)
{
int err, vol_id = vol->vol_id;
dev_t dev;
dbg_gen("add volume %d", vol_id);
/* Register character device for the volume */
cdev_init(&vol->cdev, &ubi_vol_cdev_operations);
vol->cdev.owner = THIS_MODULE;
dev = MKDEV(MAJOR(ubi->cdev.dev), vol->vol_id + 1);
err = cdev_add(&vol->cdev, dev, 1);
if (err) {
ubi_err(ubi, "cannot add character device for volume %d, error %d",
vol_id, err);
return err;
}
vol->dev.release = vol_release;
vol->dev.parent = &ubi->dev;
vol->dev.devt = dev;
#ifndef __UBOOT__
vol->dev.class = &ubi_class;
vol->dev.groups = volume_dev_groups;
#endif
dev_set_name(&vol->dev, "%s_%d", ubi->ubi_name, vol->vol_id);
err = device_register(&vol->dev);
if (err)
goto out_cdev;
self_check_volumes(ubi);
return err;
out_cdev:
cdev_del(&vol->cdev);
return err;
}
/**
* ubi_free_volume - free volume.
* @ubi: UBI device description object
* @vol: volume description object
*
* This function frees all resources for volume @vol but does not remove it.
* Used only when the UBI device is detached.
*/
void ubi_free_volume(struct ubi_device *ubi, struct ubi_volume *vol)
{
dbg_gen("free volume %d", vol->vol_id);
ubi->volumes[vol->vol_id] = NULL;
cdev_del(&vol->cdev);
device_unregister(&vol->dev);
}
/**
* self_check_volume - check volume information.
* @ubi: UBI device description object
* @vol_id: volume ID
*
* Returns zero if volume is all right and a a negative error code if not.
*/
static int self_check_volume(struct ubi_device *ubi, int vol_id)
{
int idx = vol_id2idx(ubi, vol_id);
int reserved_pebs, alignment, data_pad, vol_type, name_len, upd_marker;
const struct ubi_volume *vol;
long long n;
const char *name;
spin_lock(&ubi->volumes_lock);
reserved_pebs = be32_to_cpu(ubi->vtbl[vol_id].reserved_pebs);
vol = ubi->volumes[idx];
if (!vol) {
if (reserved_pebs) {
ubi_err(ubi, "no volume info, but volume exists");
goto fail;
}
spin_unlock(&ubi->volumes_lock);
return 0;
}
if (vol->reserved_pebs < 0 || vol->alignment < 0 || vol->data_pad < 0 ||
vol->name_len < 0) {
ubi_err(ubi, "negative values");
goto fail;
}
if (vol->alignment > ubi->leb_size || vol->alignment == 0) {
ubi_err(ubi, "bad alignment");
goto fail;
}
n = vol->alignment & (ubi->min_io_size - 1);
if (vol->alignment != 1 && n) {
ubi_err(ubi, "alignment is not multiple of min I/O unit");
goto fail;
}
n = ubi->leb_size % vol->alignment;
if (vol->data_pad != n) {
ubi_err(ubi, "bad data_pad, has to be %lld", n);
goto fail;
}
if (vol->vol_type != UBI_DYNAMIC_VOLUME &&
vol->vol_type != UBI_STATIC_VOLUME) {
ubi_err(ubi, "bad vol_type");
goto fail;
}
if (vol->upd_marker && vol->corrupted) {
ubi_err(ubi, "update marker and corrupted simultaneously");
goto fail;
}
if (vol->reserved_pebs > ubi->good_peb_count) {
ubi_err(ubi, "too large reserved_pebs");
goto fail;
}
n = ubi->leb_size - vol->data_pad;
if (vol->usable_leb_size != ubi->leb_size - vol->data_pad) {
ubi_err(ubi, "bad usable_leb_size, has to be %lld", n);
goto fail;
}
if (vol->name_len > UBI_VOL_NAME_MAX) {
ubi_err(ubi, "too long volume name, max is %d",
UBI_VOL_NAME_MAX);
goto fail;
}
n = strnlen(vol->name, vol->name_len + 1);
if (n != vol->name_len) {
ubi_err(ubi, "bad name_len %lld", n);
goto fail;
}
n = (long long)vol->used_ebs * vol->usable_leb_size;
if (vol->vol_type == UBI_DYNAMIC_VOLUME) {
if (vol->corrupted) {
ubi_err(ubi, "corrupted dynamic volume");
goto fail;
}
if (vol->used_ebs != vol->reserved_pebs) {
ubi_err(ubi, "bad used_ebs");
goto fail;
}
if (vol->last_eb_bytes != vol->usable_leb_size) {
ubi_err(ubi, "bad last_eb_bytes");
goto fail;
}
if (vol->used_bytes != n) {
ubi_err(ubi, "bad used_bytes");
goto fail;
}
if (vol->skip_check) {
ubi_err(ubi, "bad skip_check");
goto fail;
}
} else {
if (vol->used_ebs < 0 || vol->used_ebs > vol->reserved_pebs) {
ubi_err(ubi, "bad used_ebs");
goto fail;
}
if (vol->last_eb_bytes < 0 ||
vol->last_eb_bytes > vol->usable_leb_size) {
ubi_err(ubi, "bad last_eb_bytes");
goto fail;
}
if (vol->used_bytes < 0 || vol->used_bytes > n ||
vol->used_bytes < n - vol->usable_leb_size) {
ubi_err(ubi, "bad used_bytes");
goto fail;
}
}
alignment = be32_to_cpu(ubi->vtbl[vol_id].alignment);
data_pad = be32_to_cpu(ubi->vtbl[vol_id].data_pad);
name_len = be16_to_cpu(ubi->vtbl[vol_id].name_len);
upd_marker = ubi->vtbl[vol_id].upd_marker;
name = &ubi->vtbl[vol_id].name[0];
if (ubi->vtbl[vol_id].vol_type == UBI_VID_DYNAMIC)
vol_type = UBI_DYNAMIC_VOLUME;
else
vol_type = UBI_STATIC_VOLUME;
if (alignment != vol->alignment || data_pad != vol->data_pad ||
upd_marker != vol->upd_marker || vol_type != vol->vol_type ||
name_len != vol->name_len || strncmp(name, vol->name, name_len)) {
ubi_err(ubi, "volume info is different");
goto fail;
}
spin_unlock(&ubi->volumes_lock);
return 0;
fail:
ubi_err(ubi, "self-check failed for volume %d", vol_id);
if (vol)
ubi_dump_vol_info(vol);
ubi_dump_vtbl_record(&ubi->vtbl[vol_id], vol_id);
dump_stack();
spin_unlock(&ubi->volumes_lock);
return -EINVAL;
}
/**
* self_check_volumes - check information about all volumes.
* @ubi: UBI device description object
*
* Returns zero if volumes are all right and a a negative error code if not.
*/
static int self_check_volumes(struct ubi_device *ubi)
{
int i, err = 0;
if (!ubi_dbg_chk_gen(ubi))
return 0;
for (i = 0; i < ubi->vtbl_slots; i++) {
err = self_check_volume(ubi, i);
if (err)
break;
}
return err;
}
source/bootloader/u-boot-2020.01/drivers/mtd/ubi/vtbl.c
+868
View File
@@ -0,0 +1,868 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) International Business Machines Corp., 2006
* Copyright (c) Nokia Corporation, 2006, 2007
*
* Author: Artem Bityutskiy (Битюцкий Артём)
*/
/*
* This file includes volume table manipulation code. The volume table is an
* on-flash table containing volume meta-data like name, number of reserved
* physical eraseblocks, type, etc. The volume table is stored in the so-called
* "layout volume".
*
* The layout volume is an internal volume which is organized as follows. It
* consists of two logical eraseblocks - LEB 0 and LEB 1. Each logical
* eraseblock stores one volume table copy, i.e. LEB 0 and LEB 1 duplicate each
* other. This redundancy guarantees robustness to unclean reboots. The volume
* table is basically an array of volume table records. Each record contains
* full information about the volume and protected by a CRC checksum. Note,
* nowadays we use the atomic LEB change operation when updating the volume
* table, so we do not really need 2 LEBs anymore, but we preserve the older
* design for the backward compatibility reasons.
*
* When the volume table is changed, it is first changed in RAM. Then LEB 0 is
* erased, and the updated volume table is written back to LEB 0. Then same for
* LEB 1. This scheme guarantees recoverability from unclean reboots.
*
* In this UBI implementation the on-flash volume table does not contain any
* information about how much data static volumes contain.
*
* But it would still be beneficial to store this information in the volume
* table. For example, suppose we have a static volume X, and all its physical
* eraseblocks became bad for some reasons. Suppose we are attaching the
* corresponding MTD device, for some reason we find no logical eraseblocks
* corresponding to the volume X. According to the volume table volume X does
* exist. So we don't know whether it is just empty or all its physical
* eraseblocks went bad. So we cannot alarm the user properly.
*
* The volume table also stores so-called "update marker", which is used for
* volume updates. Before updating the volume, the update marker is set, and
* after the update operation is finished, the update marker is cleared. So if
* the update operation was interrupted (e.g. by an unclean reboot) - the
* update marker is still there and we know that the volume's contents is
* damaged.
*/
#ifndef __UBOOT__
#include <linux/crc32.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <asm/div64.h>
#include <u-boot/crc.h>
#else
#include <ubi_uboot.h>
#endif
#include <linux/err.h>
#include "ubi.h"
static void self_vtbl_check(const struct ubi_device *ubi);
/* Empty volume table record */
static struct ubi_vtbl_record empty_vtbl_record;
/**
* ubi_update_layout_vol - helper for updatting layout volumes on flash
* @ubi: UBI device description object
*/
static int ubi_update_layout_vol(struct ubi_device *ubi)
{
struct ubi_volume *layout_vol;
int i, err;
layout_vol = ubi->volumes[vol_id2idx(ubi, UBI_LAYOUT_VOLUME_ID)];
for (i = 0; i < UBI_LAYOUT_VOLUME_EBS; i++) {
err = ubi_eba_atomic_leb_change(ubi, layout_vol, i, ubi->vtbl,
ubi->vtbl_size);
if (err)
return err;
}
return 0;
}
/**
* ubi_change_vtbl_record - change volume table record.
* @ubi: UBI device description object
* @idx: table index to change
* @vtbl_rec: new volume table record
*
* This function changes volume table record @idx. If @vtbl_rec is %NULL, empty
* volume table record is written. The caller does not have to calculate CRC of
* the record as it is done by this function. Returns zero in case of success
* and a negative error code in case of failure.
*/
int ubi_change_vtbl_record(struct ubi_device *ubi, int idx,
struct ubi_vtbl_record *vtbl_rec)
{
int err;
uint32_t crc;
ubi_assert(idx >= 0 && idx < ubi->vtbl_slots);
if (!vtbl_rec)
vtbl_rec = &empty_vtbl_record;
else {
crc = crc32(UBI_CRC32_INIT, vtbl_rec, UBI_VTBL_RECORD_SIZE_CRC);
vtbl_rec->crc = cpu_to_be32(crc);
}
memcpy(&ubi->vtbl[idx], vtbl_rec, sizeof(struct ubi_vtbl_record));
err = ubi_update_layout_vol(ubi);
self_vtbl_check(ubi);
return err ? err : 0;
}
/**
* ubi_vtbl_rename_volumes - rename UBI volumes in the volume table.
* @ubi: UBI device description object
* @rename_list: list of &struct ubi_rename_entry objects
*
* This function re-names multiple volumes specified in @req in the volume
* table. Returns zero in case of success and a negative error code in case of
* failure.
*/
int ubi_vtbl_rename_volumes(struct ubi_device *ubi,
struct list_head *rename_list)
{
struct ubi_rename_entry *re;
list_for_each_entry(re, rename_list, list) {
uint32_t crc;
struct ubi_volume *vol = re->desc->vol;
struct ubi_vtbl_record *vtbl_rec = &ubi->vtbl[vol->vol_id];
if (re->remove) {
memcpy(vtbl_rec, &empty_vtbl_record,
sizeof(struct ubi_vtbl_record));
continue;
}
vtbl_rec->name_len = cpu_to_be16(re->new_name_len);
memcpy(vtbl_rec->name, re->new_name, re->new_name_len);
memset(vtbl_rec->name + re->new_name_len, 0,
UBI_VOL_NAME_MAX + 1 - re->new_name_len);
crc = crc32(UBI_CRC32_INIT, vtbl_rec,
UBI_VTBL_RECORD_SIZE_CRC);
vtbl_rec->crc = cpu_to_be32(crc);
}
return ubi_update_layout_vol(ubi);
}
/**
* vtbl_check - check if volume table is not corrupted and sensible.
* @ubi: UBI device description object
* @vtbl: volume table
*
* This function returns zero if @vtbl is all right, %1 if CRC is incorrect,
* and %-EINVAL if it contains inconsistent data.
*/
static int vtbl_check(const struct ubi_device *ubi,
const struct ubi_vtbl_record *vtbl)
{
int i, n, reserved_pebs, alignment, data_pad, vol_type, name_len;
int upd_marker, err;
uint32_t crc;
const char *name;
for (i = 0; i < ubi->vtbl_slots; i++) {
cond_resched();
reserved_pebs = be32_to_cpu(vtbl[i].reserved_pebs);
alignment = be32_to_cpu(vtbl[i].alignment);
data_pad = be32_to_cpu(vtbl[i].data_pad);
upd_marker = vtbl[i].upd_marker;
vol_type = vtbl[i].vol_type;
name_len = be16_to_cpu(vtbl[i].name_len);
name = &vtbl[i].name[0];
crc = crc32(UBI_CRC32_INIT, &vtbl[i], UBI_VTBL_RECORD_SIZE_CRC);
if (be32_to_cpu(vtbl[i].crc) != crc) {
ubi_err(ubi, "bad CRC at record %u: %#08x, not %#08x",
i, crc, be32_to_cpu(vtbl[i].crc));
ubi_dump_vtbl_record(&vtbl[i], i);
return 1;
}
if (reserved_pebs == 0) {
if (memcmp(&vtbl[i], &empty_vtbl_record,
UBI_VTBL_RECORD_SIZE)) {
err = 2;
goto bad;
}
continue;
}
if (reserved_pebs < 0 || alignment < 0 || data_pad < 0 ||
name_len < 0) {
err = 3;
goto bad;
}
if (alignment > ubi->leb_size || alignment == 0) {
err = 4;
goto bad;
}
n = alignment & (ubi->min_io_size - 1);
if (alignment != 1 && n) {
err = 5;
goto bad;
}
n = ubi->leb_size % alignment;
if (data_pad != n) {
ubi_err(ubi, "bad data_pad, has to be %d", n);
err = 6;
goto bad;
}
if (vol_type != UBI_VID_DYNAMIC && vol_type != UBI_VID_STATIC) {
err = 7;
goto bad;
}
if (upd_marker != 0 && upd_marker != 1) {
err = 8;
goto bad;
}
if (reserved_pebs > ubi->good_peb_count) {
ubi_err(ubi, "too large reserved_pebs %d, good PEBs %d",
reserved_pebs, ubi->good_peb_count);
err = 9;
goto bad;
}
if (name_len > UBI_VOL_NAME_MAX) {
err = 10;
goto bad;
}
if (name[0] == '\0') {
err = 11;
goto bad;
}
if (name_len != strnlen(name, name_len + 1)) {
err = 12;
goto bad;
}
}
/* Checks that all names are unique */
for (i = 0; i < ubi->vtbl_slots - 1; i++) {
for (n = i + 1; n < ubi->vtbl_slots; n++) {
int len1 = be16_to_cpu(vtbl[i].name_len);
int len2 = be16_to_cpu(vtbl[n].name_len);
if (len1 > 0 && len1 == len2 &&
#ifndef __UBOOT__
!strncmp(vtbl[i].name, vtbl[n].name, len1)) {
#else
!strncmp((char *)vtbl[i].name, vtbl[n].name, len1)) {
#endif
ubi_err(ubi, "volumes %d and %d have the same name \"%s\"",
i, n, vtbl[i].name);
ubi_dump_vtbl_record(&vtbl[i], i);
ubi_dump_vtbl_record(&vtbl[n], n);
return -EINVAL;
}
}
}
return 0;
bad:
ubi_err(ubi, "volume table check failed: record %d, error %d", i, err);
ubi_dump_vtbl_record(&vtbl[i], i);
return -EINVAL;
}
/**
* create_vtbl - create a copy of volume table.
* @ubi: UBI device description object
* @ai: attaching information
* @copy: number of the volume table copy
* @vtbl: contents of the volume table
*
* This function returns zero in case of success and a negative error code in
* case of failure.
*/
static int create_vtbl(struct ubi_device *ubi, struct ubi_attach_info *ai,
int copy, void *vtbl)
{
int err, tries = 0;
struct ubi_vid_hdr *vid_hdr;
struct ubi_ainf_peb *new_aeb;
dbg_gen("create volume table (copy #%d)", copy + 1);
vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_KERNEL);
if (!vid_hdr)
return -ENOMEM;
retry:
new_aeb = ubi_early_get_peb(ubi, ai);
if (IS_ERR(new_aeb)) {
err = PTR_ERR(new_aeb);
goto out_free;
}
vid_hdr->vol_type = UBI_LAYOUT_VOLUME_TYPE;
vid_hdr->vol_id = cpu_to_be32(UBI_LAYOUT_VOLUME_ID);
vid_hdr->compat = UBI_LAYOUT_VOLUME_COMPAT;
vid_hdr->data_size = vid_hdr->used_ebs =
vid_hdr->data_pad = cpu_to_be32(0);
vid_hdr->lnum = cpu_to_be32(copy);
vid_hdr->sqnum = cpu_to_be64(++ai->max_sqnum);
/* The EC header is already there, write the VID header */
err = ubi_io_write_vid_hdr(ubi, new_aeb->pnum, vid_hdr);
if (err)
goto write_error;
/* Write the layout volume contents */
err = ubi_io_write_data(ubi, vtbl, new_aeb->pnum, 0, ubi->vtbl_size);
if (err)
goto write_error;
/*
* And add it to the attaching information. Don't delete the old version
* of this LEB as it will be deleted and freed in 'ubi_add_to_av()'.
*/
err = ubi_add_to_av(ubi, ai, new_aeb->pnum, new_aeb->ec, vid_hdr, 0);
kmem_cache_free(ai->aeb_slab_cache, new_aeb);
ubi_free_vid_hdr(ubi, vid_hdr);
return err;
write_error:
if (err == -EIO && ++tries <= 5) {
/*
* Probably this physical eraseblock went bad, try to pick
* another one.
*/
list_add(&new_aeb->u.list, &ai->erase);
goto retry;
}
kmem_cache_free(ai->aeb_slab_cache, new_aeb);
out_free:
ubi_free_vid_hdr(ubi, vid_hdr);
return err;
}
/**
* process_lvol - process the layout volume.
* @ubi: UBI device description object
* @ai: attaching information
* @av: layout volume attaching information
*
* This function is responsible for reading the layout volume, ensuring it is
* not corrupted, and recovering from corruptions if needed. Returns volume
* table in case of success and a negative error code in case of failure.
*/
static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
struct ubi_attach_info *ai,
struct ubi_ainf_volume *av)
{
int err;
struct rb_node *rb;
struct ubi_ainf_peb *aeb;
struct ubi_vtbl_record *leb[UBI_LAYOUT_VOLUME_EBS] = { NULL, NULL };
int leb_corrupted[UBI_LAYOUT_VOLUME_EBS] = {1, 1};
/*
* UBI goes through the following steps when it changes the layout
* volume:
* a. erase LEB 0;
* b. write new data to LEB 0;
* c. erase LEB 1;
* d. write new data to LEB 1.
*
* Before the change, both LEBs contain the same data.
*
* Due to unclean reboots, the contents of LEB 0 may be lost, but there
* should LEB 1. So it is OK if LEB 0 is corrupted while LEB 1 is not.
* Similarly, LEB 1 may be lost, but there should be LEB 0. And
* finally, unclean reboots may result in a situation when neither LEB
* 0 nor LEB 1 are corrupted, but they are different. In this case, LEB
* 0 contains more recent information.
*
* So the plan is to first check LEB 0. Then
* a. if LEB 0 is OK, it must be containing the most recent data; then
* we compare it with LEB 1, and if they are different, we copy LEB
* 0 to LEB 1;
* b. if LEB 0 is corrupted, but LEB 1 has to be OK, and we copy LEB 1
* to LEB 0.
*/
dbg_gen("check layout volume");
/* Read both LEB 0 and LEB 1 into memory */
ubi_rb_for_each_entry(rb, aeb, &av->root, u.rb) {
leb[aeb->lnum] = vzalloc(ubi->vtbl_size);
if (!leb[aeb->lnum]) {
err = -ENOMEM;
goto out_free;
}
err = ubi_io_read_data(ubi, leb[aeb->lnum], aeb->pnum, 0,
ubi->vtbl_size);
if (err == UBI_IO_BITFLIPS || mtd_is_eccerr(err))
/*
* Scrub the PEB later. Note, -EBADMSG indicates an
* uncorrectable ECC error, but we have our own CRC and
* the data will be checked later. If the data is OK,
* the PEB will be scrubbed (because we set
* aeb->scrub). If the data is not OK, the contents of
* the PEB will be recovered from the second copy, and
* aeb->scrub will be cleared in
* 'ubi_add_to_av()'.
*/
aeb->scrub = 1;
else if (err)
goto out_free;
}
err = -EINVAL;
if (leb[0]) {
leb_corrupted[0] = vtbl_check(ubi, leb[0]);
if (leb_corrupted[0] < 0)
goto out_free;
}
if (!leb_corrupted[0]) {
/* LEB 0 is OK */
if (leb[1])
leb_corrupted[1] = memcmp(leb[0], leb[1],
ubi->vtbl_size);
if (leb_corrupted[1]) {
ubi_warn(ubi, "volume table copy #2 is corrupted");
err = create_vtbl(ubi, ai, 1, leb[0]);
if (err)
goto out_free;
ubi_msg(ubi, "volume table was restored");
}
/* Both LEB 1 and LEB 2 are OK and consistent */
vfree(leb[1]);
return leb[0];
} else {
/* LEB 0 is corrupted or does not exist */
if (leb[1]) {
leb_corrupted[1] = vtbl_check(ubi, leb[1]);
if (leb_corrupted[1] < 0)
goto out_free;
}
if (leb_corrupted[1]) {
/* Both LEB 0 and LEB 1 are corrupted */
ubi_err(ubi, "both volume tables are corrupted");
goto out_free;
}
ubi_warn(ubi, "volume table copy #1 is corrupted");
err = create_vtbl(ubi, ai, 0, leb[1]);
if (err)
goto out_free;
ubi_msg(ubi, "volume table was restored");
vfree(leb[0]);
return leb[1];
}
out_free:
vfree(leb[0]);
vfree(leb[1]);
return ERR_PTR(err);
}
/**
* create_empty_lvol - create empty layout volume.
* @ubi: UBI device description object
* @ai: attaching information
*
* This function returns volume table contents in case of success and a
* negative error code in case of failure.
*/
static struct ubi_vtbl_record *create_empty_lvol(struct ubi_device *ubi,
struct ubi_attach_info *ai)
{
int i;
struct ubi_vtbl_record *vtbl;
vtbl = vzalloc(ubi->vtbl_size);
if (!vtbl)
return ERR_PTR(-ENOMEM);
for (i = 0; i < ubi->vtbl_slots; i++)
memcpy(&vtbl[i], &empty_vtbl_record, UBI_VTBL_RECORD_SIZE);
for (i = 0; i < UBI_LAYOUT_VOLUME_EBS; i++) {
int err;
err = create_vtbl(ubi, ai, i, vtbl);
if (err) {
vfree(vtbl);
return ERR_PTR(err);
}
}
return vtbl;
}
/**
* init_volumes - initialize volume information for existing volumes.
* @ubi: UBI device description object
* @ai: scanning information
* @vtbl: volume table
*
* This function allocates volume description objects for existing volumes.
* Returns zero in case of success and a negative error code in case of
* failure.
*/
static int init_volumes(struct ubi_device *ubi,
const struct ubi_attach_info *ai,
const struct ubi_vtbl_record *vtbl)
{
int i, reserved_pebs = 0;
struct ubi_ainf_volume *av;
struct ubi_volume *vol;
for (i = 0; i < ubi->vtbl_slots; i++) {
cond_resched();
if (be32_to_cpu(vtbl[i].reserved_pebs) == 0)
continue; /* Empty record */
vol = kzalloc(sizeof(struct ubi_volume), GFP_KERNEL);
if (!vol)
return -ENOMEM;
vol->reserved_pebs = be32_to_cpu(vtbl[i].reserved_pebs);
vol->alignment = be32_to_cpu(vtbl[i].alignment);
vol->data_pad = be32_to_cpu(vtbl[i].data_pad);
vol->upd_marker = vtbl[i].upd_marker;
vol->vol_type = vtbl[i].vol_type == UBI_VID_DYNAMIC ?
UBI_DYNAMIC_VOLUME : UBI_STATIC_VOLUME;
vol->name_len = be16_to_cpu(vtbl[i].name_len);
vol->usable_leb_size = ubi->leb_size - vol->data_pad;
memcpy(vol->name, vtbl[i].name, vol->name_len);
vol->name[vol->name_len] = '\0';
vol->vol_id = i;
if (vtbl[i].flags & UBI_VTBL_SKIP_CRC_CHECK_FLG)
vol->skip_check = 1;
if (vtbl[i].flags & UBI_VTBL_AUTORESIZE_FLG) {
/* Auto re-size flag may be set only for one volume */
if (ubi->autoresize_vol_id != -1) {
ubi_err(ubi, "more than one auto-resize volume (%d and %d)",
ubi->autoresize_vol_id, i);
kfree(vol);
return -EINVAL;
}
ubi->autoresize_vol_id = i;
}
ubi_assert(!ubi->volumes[i]);
ubi->volumes[i] = vol;
ubi->vol_count += 1;
vol->ubi = ubi;
reserved_pebs += vol->reserved_pebs;
/*
* In case of dynamic volume UBI knows nothing about how many
* data is stored there. So assume the whole volume is used.
*/
if (vol->vol_type == UBI_DYNAMIC_VOLUME) {
vol->used_ebs = vol->reserved_pebs;
vol->last_eb_bytes = vol->usable_leb_size;
vol->used_bytes =
(long long)vol->used_ebs * vol->usable_leb_size;
continue;
}
/* Static volumes only */
av = ubi_find_av(ai, i);
if (!av || !av->leb_count) {
/*
* No eraseblocks belonging to this volume found. We
* don't actually know whether this static volume is
* completely corrupted or just contains no data. And
* we cannot know this as long as data size is not
* stored on flash. So we just assume the volume is
* empty. FIXME: this should be handled.
*/
continue;
}
if (av->leb_count != av->used_ebs) {
/*
* We found a static volume which misses several
* eraseblocks. Treat it as corrupted.
*/
ubi_warn(ubi, "static volume %d misses %d LEBs - corrupted",
av->vol_id, av->used_ebs - av->leb_count);
vol->corrupted = 1;
continue;
}
vol->used_ebs = av->used_ebs;
vol->used_bytes =
(long long)(vol->used_ebs - 1) * vol->usable_leb_size;
vol->used_bytes += av->last_data_size;
vol->last_eb_bytes = av->last_data_size;
}
/* And add the layout volume */
vol = kzalloc(sizeof(struct ubi_volume), GFP_KERNEL);
if (!vol)
return -ENOMEM;
vol->reserved_pebs = UBI_LAYOUT_VOLUME_EBS;
vol->alignment = UBI_LAYOUT_VOLUME_ALIGN;
vol->vol_type = UBI_DYNAMIC_VOLUME;
vol->name_len = sizeof(UBI_LAYOUT_VOLUME_NAME) - 1;
memcpy(vol->name, UBI_LAYOUT_VOLUME_NAME, vol->name_len + 1);
vol->usable_leb_size = ubi->leb_size;
vol->used_ebs = vol->reserved_pebs;
vol->last_eb_bytes = vol->reserved_pebs;
vol->used_bytes =
(long long)vol->used_ebs * (ubi->leb_size - vol->data_pad);
vol->vol_id = UBI_LAYOUT_VOLUME_ID;
vol->ref_count = 1;
ubi_assert(!ubi->volumes[i]);
ubi->volumes[vol_id2idx(ubi, vol->vol_id)] = vol;
reserved_pebs += vol->reserved_pebs;
ubi->vol_count += 1;
vol->ubi = ubi;
if (reserved_pebs > ubi->avail_pebs) {
ubi_err(ubi, "not enough PEBs, required %d, available %d",
reserved_pebs, ubi->avail_pebs);
if (ubi->corr_peb_count)
ubi_err(ubi, "%d PEBs are corrupted and not used",
ubi->corr_peb_count);
}
ubi->rsvd_pebs += reserved_pebs;
ubi->avail_pebs -= reserved_pebs;
return 0;
}
/**
* check_av - check volume attaching information.
* @vol: UBI volume description object
* @av: volume attaching information
*
* This function returns zero if the volume attaching information is consistent
* to the data read from the volume tabla, and %-EINVAL if not.
*/
static int check_av(const struct ubi_volume *vol,
const struct ubi_ainf_volume *av)
{
int err;
if (av->highest_lnum >= vol->reserved_pebs) {
err = 1;
goto bad;
}
if (av->leb_count > vol->reserved_pebs) {
err = 2;
goto bad;
}
if (av->vol_type != vol->vol_type) {
err = 3;
goto bad;
}
if (av->used_ebs > vol->reserved_pebs) {
err = 4;
goto bad;
}
if (av->data_pad != vol->data_pad) {
err = 5;
goto bad;
}
return 0;
bad:
ubi_err(vol->ubi, "bad attaching information, error %d", err);
ubi_dump_av(av);
ubi_dump_vol_info(vol);
return -EINVAL;
}
/**
* check_attaching_info - check that attaching information.
* @ubi: UBI device description object
* @ai: attaching information
*
* Even though we protect on-flash data by CRC checksums, we still don't trust
* the media. This function ensures that attaching information is consistent to
* the information read from the volume table. Returns zero if the attaching
* information is OK and %-EINVAL if it is not.
*/
static int check_attaching_info(const struct ubi_device *ubi,
struct ubi_attach_info *ai)
{
int err, i;
struct ubi_ainf_volume *av;
struct ubi_volume *vol;
if (ai->vols_found > UBI_INT_VOL_COUNT + ubi->vtbl_slots) {
ubi_err(ubi, "found %d volumes while attaching, maximum is %d + %d",
ai->vols_found, UBI_INT_VOL_COUNT, ubi->vtbl_slots);
return -EINVAL;
}
if (ai->highest_vol_id >= ubi->vtbl_slots + UBI_INT_VOL_COUNT &&
ai->highest_vol_id < UBI_INTERNAL_VOL_START) {
ubi_err(ubi, "too large volume ID %d found",
ai->highest_vol_id);
return -EINVAL;
}
for (i = 0; i < ubi->vtbl_slots + UBI_INT_VOL_COUNT; i++) {
cond_resched();
av = ubi_find_av(ai, i);
vol = ubi->volumes[i];
if (!vol) {
if (av)
ubi_remove_av(ai, av);
continue;
}
if (vol->reserved_pebs == 0) {
ubi_assert(i < ubi->vtbl_slots);
if (!av)
continue;
/*
* During attaching we found a volume which does not
* exist according to the information in the volume
* table. This must have happened due to an unclean
* reboot while the volume was being removed. Discard
* these eraseblocks.
*/
ubi_msg(ubi, "finish volume %d removal", av->vol_id);
ubi_remove_av(ai, av);
} else if (av) {
err = check_av(vol, av);
if (err)
return err;
}
}
return 0;
}
/**
* ubi_read_volume_table - read the volume table.
* @ubi: UBI device description object
* @ai: attaching information
*
* This function reads volume table, checks it, recover from errors if needed,
* or creates it if needed. Returns zero in case of success and a negative
* error code in case of failure.
*/
int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_attach_info *ai)
{
int i, err;
struct ubi_ainf_volume *av;
empty_vtbl_record.crc = cpu_to_be32(0xf116c36b);
/*
* The number of supported volumes is limited by the eraseblock size
* and by the UBI_MAX_VOLUMES constant.
*/
ubi->vtbl_slots = ubi->leb_size / UBI_VTBL_RECORD_SIZE;
if (ubi->vtbl_slots > UBI_MAX_VOLUMES)
ubi->vtbl_slots = UBI_MAX_VOLUMES;
ubi->vtbl_size = ubi->vtbl_slots * UBI_VTBL_RECORD_SIZE;
ubi->vtbl_size = ALIGN(ubi->vtbl_size, ubi->min_io_size);
av = ubi_find_av(ai, UBI_LAYOUT_VOLUME_ID);
if (!av) {
/*
* No logical eraseblocks belonging to the layout volume were
* found. This could mean that the flash is just empty. In
* this case we create empty layout volume.
*
* But if flash is not empty this must be a corruption or the
* MTD device just contains garbage.
*/
if (ai->is_empty) {
ubi->vtbl = create_empty_lvol(ubi, ai);
if (IS_ERR(ubi->vtbl))
return PTR_ERR(ubi->vtbl);
} else {
ubi_err(ubi, "the layout volume was not found");
return -EINVAL;
}
} else {
if (av->leb_count > UBI_LAYOUT_VOLUME_EBS) {
/* This must not happen with proper UBI images */
ubi_err(ubi, "too many LEBs (%d) in layout volume",
av->leb_count);
return -EINVAL;
}
ubi->vtbl = process_lvol(ubi, ai, av);
if (IS_ERR(ubi->vtbl))
return PTR_ERR(ubi->vtbl);
}
ubi->avail_pebs = ubi->good_peb_count - ubi->corr_peb_count;
/*
* The layout volume is OK, initialize the corresponding in-RAM data
* structures.
*/
err = init_volumes(ubi, ai, ubi->vtbl);
if (err)
goto out_free;
/*
* Make sure that the attaching information is consistent to the
* information stored in the volume table.
*/
err = check_attaching_info(ubi, ai);
if (err)
goto out_free;
return 0;
out_free:
vfree(ubi->vtbl);
for (i = 0; i < ubi->vtbl_slots + UBI_INT_VOL_COUNT; i++) {
kfree(ubi->volumes[i]);
ubi->volumes[i] = NULL;
}
return err;
}
/**
* self_vtbl_check - check volume table.
* @ubi: UBI device description object
*/
static void self_vtbl_check(const struct ubi_device *ubi)
{
if (!ubi_dbg_chk_gen(ubi))
return;
if (vtbl_check(ubi, ubi->vtbl)) {
ubi_err(ubi, "self-check failed");
BUG();
}
}
source/bootloader/u-boot-2020.01/drivers/mtd/ubi/wl.c
+1880
View File
File diff suppressed because it is too large Load Diff
source/bootloader/u-boot-2020.01/drivers/mtd/ubi/wl.h
+34
View File
@@ -0,0 +1,34 @@
#ifndef UBI_WL_H
#define UBI_WL_H
#ifdef CONFIG_MTD_UBI_FASTMAP
static int anchor_pebs_avalible(struct rb_root *root);
#ifndef __UBOOT__
static void update_fastmap_work_fn(struct work_struct *wrk);
#else
void update_fastmap_work_fn(struct ubi_device *ubi);
#endif
static struct ubi_wl_entry *find_anchor_wl_entry(struct rb_root *root);
static struct ubi_wl_entry *get_peb_for_wl(struct ubi_device *ubi);
static void ubi_fastmap_close(struct ubi_device *ubi);
static inline void ubi_fastmap_init(struct ubi_device *ubi, int *count)
{
/* Reserve enough LEBs to store two fastmaps. */
*count += (ubi->fm_size / ubi->leb_size) * 2;
#ifndef __UBOOT__
INIT_WORK(&ubi->fm_work, update_fastmap_work_fn);
#endif
}
static struct ubi_wl_entry *may_reserve_for_fm(struct ubi_device *ubi,
struct ubi_wl_entry *e,
struct rb_root *root);
#else /* !CONFIG_MTD_UBI_FASTMAP */
static struct ubi_wl_entry *get_peb_for_wl(struct ubi_device *ubi);
static inline void ubi_fastmap_close(struct ubi_device *ubi) { }
static inline void ubi_fastmap_init(struct ubi_device *ubi, int *count) { }
static struct ubi_wl_entry *may_reserve_for_fm(struct ubi_device *ubi,
struct ubi_wl_entry *e,
struct rb_root *root) {
return e;
}
#endif /* CONFIG_MTD_UBI_FASTMAP */
#endif /* UBI_WL_H */