GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)

source/bootloader/u-boot-2020.01/drivers/phy/meson-g12a-usb2.c

@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Meson G12A USB2 PHY driver
+ *
+ * Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ * Copyright (C) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstron@baylibre.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <bitfield.h>
+#include <dm.h>
+#include <errno.h>
+#include <generic-phy.h>
+#include <regmap.h>
+#include <power/regulator.h>
+#include <reset.h>
+#include <clk.h>
+
+#include <linux/bitops.h>
+#include <linux/compat.h>
+
+#define PHY_CTRL_R0						0x0
+#define PHY_CTRL_R1						0x4
+#define PHY_CTRL_R2						0x8
+#define PHY_CTRL_R3						0xc
+#define PHY_CTRL_R4						0x10
+#define PHY_CTRL_R5						0x14
+#define PHY_CTRL_R6						0x18
+#define PHY_CTRL_R7						0x1c
+#define PHY_CTRL_R8						0x20
+#define PHY_CTRL_R9						0x24
+#define PHY_CTRL_R10						0x28
+#define PHY_CTRL_R11						0x2c
+#define PHY_CTRL_R12						0x30
+#define PHY_CTRL_R13						0x34
+#define PHY_CTRL_R14						0x38
+#define PHY_CTRL_R15						0x3c
+#define PHY_CTRL_R16						0x40
+#define PHY_CTRL_R17						0x44
+#define PHY_CTRL_R18						0x48
+#define PHY_CTRL_R19						0x4c
+#define PHY_CTRL_R20						0x50
+#define PHY_CTRL_R21						0x54
+#define PHY_CTRL_R22						0x58
+#define PHY_CTRL_R23						0x5c
+
+#define RESET_COMPLETE_TIME					1000
+#define PLL_RESET_COMPLETE_TIME					100
+
+struct phy_meson_g12a_usb2_priv {
+	struct regmap		*regmap;
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
+	struct udevice		*phy_supply;
+#endif
+#if CONFIG_IS_ENABLED(CLK)
+	struct clk		clk;
+#endif
+	struct reset_ctl	reset;
+};
+
+
+static int phy_meson_g12a_usb2_power_on(struct phy *phy)
+{
+	struct udevice *dev = phy->dev;
+	struct phy_meson_g12a_usb2_priv *priv = dev_get_priv(dev);
+
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
+	if (priv->phy_supply) {
+		int ret = regulator_set_enable(priv->phy_supply, true);
+		if (ret)
+			return ret;
+	}
+#endif
+
+	return 0;
+}
+
+static int phy_meson_g12a_usb2_power_off(struct phy *phy)
+{
+	struct udevice *dev = phy->dev;
+	struct phy_meson_g12a_usb2_priv *priv = dev_get_priv(dev);
+
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
+	if (priv->phy_supply) {
+		int ret = regulator_set_enable(priv->phy_supply, false);
+		if (ret) {
+			pr_err("Error disabling PHY supply\n");
+			return ret;
+		}
+	}
+#endif
+
+	return 0;
+}
+
+static int phy_meson_g12a_usb2_init(struct phy *phy)
+{
+	struct udevice *dev = phy->dev;
+	struct phy_meson_g12a_usb2_priv *priv = dev_get_priv(dev);
+	int ret;
+
+	ret = reset_assert(&priv->reset);
+	udelay(1);
+	ret |= reset_deassert(&priv->reset);
+	if (ret)
+		return ret;
+
+	udelay(RESET_COMPLETE_TIME);
+
+	/* usb2_otg_aca_en == 0 */
+	regmap_update_bits(priv->regmap, PHY_CTRL_R21, BIT(2), 0);
+
+	/* PLL Setup : 24MHz * 20 / 1 = 480MHz */
+	regmap_write(priv->regmap, PHY_CTRL_R16, 0x39400414);
+	regmap_write(priv->regmap, PHY_CTRL_R17, 0x927e0000);
+	regmap_write(priv->regmap, PHY_CTRL_R18, 0xac5f49e5);
+
+	udelay(PLL_RESET_COMPLETE_TIME);
+
+	/* UnReset PLL */
+	regmap_write(priv->regmap, PHY_CTRL_R16, 0x19400414);
+
+	/* PHY Tuning */
+	regmap_write(priv->regmap, PHY_CTRL_R20, 0xfe18);
+	regmap_write(priv->regmap, PHY_CTRL_R4, 0x8000fff);
+
+	/* Tuning Disconnect Threshold */
+	regmap_write(priv->regmap, PHY_CTRL_R3, 0x34);
+
+	/* Analog Settings */
+	regmap_write(priv->regmap, PHY_CTRL_R14, 0);
+	regmap_write(priv->regmap, PHY_CTRL_R13, 0x78000);
+
+	return 0;
+}
+
+static int phy_meson_g12a_usb2_exit(struct phy *phy)
+{
+	struct udevice *dev = phy->dev;
+	struct phy_meson_g12a_usb2_priv *priv = dev_get_priv(dev);
+	int ret;
+
+	ret = reset_assert(&priv->reset);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+struct phy_ops meson_g12a_usb2_phy_ops = {
+	.init = phy_meson_g12a_usb2_init,
+	.exit = phy_meson_g12a_usb2_exit,
+	.power_on = phy_meson_g12a_usb2_power_on,
+	.power_off = phy_meson_g12a_usb2_power_off,
+};
+
+int meson_g12a_usb2_phy_probe(struct udevice *dev)
+{
+	struct phy_meson_g12a_usb2_priv *priv = dev_get_priv(dev);
+	int ret;
+
+	ret = regmap_init_mem(dev_ofnode(dev), &priv->regmap);
+	if (ret)
+		return ret;
+
+	ret = reset_get_by_index(dev, 0, &priv->reset);
+	if (ret == -ENOTSUPP)
+		return 0;
+	else if (ret)
+		return ret;
+
+	ret = reset_deassert(&priv->reset);
+	if (ret) {
+		reset_release_all(&priv->reset, 1);
+		return ret;
+	}
+
+#if CONFIG_IS_ENABLED(CLK)
+	ret = clk_get_by_index(dev, 0, &priv->clk);
+	if (ret < 0)
+		return ret;
+
+	ret = clk_enable(&priv->clk);
+	if (ret && ret != -ENOSYS && ret != -ENOTSUPP) {
+		pr_err("failed to enable PHY clock\n");
+		clk_free(&priv->clk);
+		return ret;
+	}
+#endif
+
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
+	ret = device_get_supply_regulator(dev, "phy-supply", &priv->phy_supply);
+	if (ret && ret != -ENOENT) {
+		pr_err("Failed to get PHY regulator\n");
+		return ret;
+	}
+#endif
+
+	return 0;
+}
+
+static const struct udevice_id meson_g12a_usb2_phy_ids[] = {
+	{ .compatible = "amlogic,g12a-usb2-phy" },
+	{ }
+};
+
+U_BOOT_DRIVER(meson_g12a_usb2_phy) = {
+	.name = "meson_g12a_usb2_phy",
+	.id = UCLASS_PHY,
+	.of_match = meson_g12a_usb2_phy_ids,
+	.probe = meson_g12a_usb2_phy_probe,
+	.ops = &meson_g12a_usb2_phy_ops,
+	.priv_auto_alloc_size = sizeof(struct phy_meson_g12a_usb2_priv),
+};