GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)
This commit is contained in:
@@ -0,0 +1,240 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* (C) Copyright 2009 SAMSUNG Electronics
|
||||
* Minkyu Kang <mk7.kang@samsung.com>
|
||||
* Heungjun Kim <riverful.kim@samsung.com>
|
||||
*
|
||||
* based on drivers/serial/s3c64xx.c
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <dm.h>
|
||||
#include <errno.h>
|
||||
#include <fdtdec.h>
|
||||
#include <linux/compiler.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/clk.h>
|
||||
#include <asm/arch/uart.h>
|
||||
#include <serial.h>
|
||||
#include <clk.h>
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
#define RX_FIFO_COUNT_SHIFT 0
|
||||
#define RX_FIFO_COUNT_MASK (0xff << RX_FIFO_COUNT_SHIFT)
|
||||
#define RX_FIFO_FULL (1 << 8)
|
||||
#define TX_FIFO_COUNT_SHIFT 16
|
||||
#define TX_FIFO_COUNT_MASK (0xff << TX_FIFO_COUNT_SHIFT)
|
||||
#define TX_FIFO_FULL (1 << 24)
|
||||
|
||||
/* Information about a serial port */
|
||||
struct s5p_serial_platdata {
|
||||
struct s5p_uart *reg; /* address of registers in physical memory */
|
||||
u8 port_id; /* uart port number */
|
||||
};
|
||||
|
||||
/*
|
||||
* The coefficient, used to calculate the baudrate on S5P UARTs is
|
||||
* calculated as
|
||||
* C = UBRDIV * 16 + number_of_set_bits_in_UDIVSLOT
|
||||
* however, section 31.6.11 of the datasheet doesn't recomment using 1 for 1,
|
||||
* 3 for 2, ... (2^n - 1) for n, instead, they suggest using these constants:
|
||||
*/
|
||||
static const int udivslot[] = {
|
||||
0,
|
||||
0x0080,
|
||||
0x0808,
|
||||
0x0888,
|
||||
0x2222,
|
||||
0x4924,
|
||||
0x4a52,
|
||||
0x54aa,
|
||||
0x5555,
|
||||
0xd555,
|
||||
0xd5d5,
|
||||
0xddd5,
|
||||
0xdddd,
|
||||
0xdfdd,
|
||||
0xdfdf,
|
||||
0xffdf,
|
||||
};
|
||||
|
||||
static void __maybe_unused s5p_serial_init(struct s5p_uart *uart)
|
||||
{
|
||||
/* enable FIFOs, auto clear Rx FIFO */
|
||||
writel(0x3, &uart->ufcon);
|
||||
writel(0, &uart->umcon);
|
||||
/* 8N1 */
|
||||
writel(0x3, &uart->ulcon);
|
||||
/* No interrupts, no DMA, pure polling */
|
||||
writel(0x245, &uart->ucon);
|
||||
}
|
||||
|
||||
static void __maybe_unused s5p_serial_baud(struct s5p_uart *uart, uint uclk,
|
||||
int baudrate)
|
||||
{
|
||||
u32 val;
|
||||
|
||||
val = uclk / baudrate;
|
||||
|
||||
writel(val / 16 - 1, &uart->ubrdiv);
|
||||
|
||||
if (s5p_uart_divslot())
|
||||
writew(udivslot[val % 16], &uart->rest.slot);
|
||||
else
|
||||
writeb(val % 16, &uart->rest.value);
|
||||
}
|
||||
|
||||
#ifndef CONFIG_SPL_BUILD
|
||||
int s5p_serial_setbrg(struct udevice *dev, int baudrate)
|
||||
{
|
||||
struct s5p_serial_platdata *plat = dev->platdata;
|
||||
struct s5p_uart *const uart = plat->reg;
|
||||
u32 uclk;
|
||||
|
||||
#ifdef CONFIG_CLK_EXYNOS
|
||||
struct clk clk;
|
||||
u32 ret;
|
||||
|
||||
ret = clk_get_by_index(dev, 1, &clk);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
uclk = clk_get_rate(&clk);
|
||||
#else
|
||||
uclk = get_uart_clk(plat->port_id);
|
||||
#endif
|
||||
|
||||
s5p_serial_baud(uart, uclk, baudrate);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int s5p_serial_probe(struct udevice *dev)
|
||||
{
|
||||
struct s5p_serial_platdata *plat = dev->platdata;
|
||||
struct s5p_uart *const uart = plat->reg;
|
||||
|
||||
s5p_serial_init(uart);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int serial_err_check(const struct s5p_uart *const uart, int op)
|
||||
{
|
||||
unsigned int mask;
|
||||
|
||||
/*
|
||||
* UERSTAT
|
||||
* Break Detect [3]
|
||||
* Frame Err [2] : receive operation
|
||||
* Parity Err [1] : receive operation
|
||||
* Overrun Err [0] : receive operation
|
||||
*/
|
||||
if (op)
|
||||
mask = 0x8;
|
||||
else
|
||||
mask = 0xf;
|
||||
|
||||
return readl(&uart->uerstat) & mask;
|
||||
}
|
||||
|
||||
static int s5p_serial_getc(struct udevice *dev)
|
||||
{
|
||||
struct s5p_serial_platdata *plat = dev->platdata;
|
||||
struct s5p_uart *const uart = plat->reg;
|
||||
|
||||
if (!(readl(&uart->ufstat) & RX_FIFO_COUNT_MASK))
|
||||
return -EAGAIN;
|
||||
|
||||
serial_err_check(uart, 0);
|
||||
return (int)(readb(&uart->urxh) & 0xff);
|
||||
}
|
||||
|
||||
static int s5p_serial_putc(struct udevice *dev, const char ch)
|
||||
{
|
||||
struct s5p_serial_platdata *plat = dev->platdata;
|
||||
struct s5p_uart *const uart = plat->reg;
|
||||
|
||||
if (readl(&uart->ufstat) & TX_FIFO_FULL)
|
||||
return -EAGAIN;
|
||||
|
||||
writeb(ch, &uart->utxh);
|
||||
serial_err_check(uart, 1);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int s5p_serial_pending(struct udevice *dev, bool input)
|
||||
{
|
||||
struct s5p_serial_platdata *plat = dev->platdata;
|
||||
struct s5p_uart *const uart = plat->reg;
|
||||
uint32_t ufstat = readl(&uart->ufstat);
|
||||
|
||||
if (input)
|
||||
return (ufstat & RX_FIFO_COUNT_MASK) >> RX_FIFO_COUNT_SHIFT;
|
||||
else
|
||||
return (ufstat & TX_FIFO_COUNT_MASK) >> TX_FIFO_COUNT_SHIFT;
|
||||
}
|
||||
|
||||
static int s5p_serial_ofdata_to_platdata(struct udevice *dev)
|
||||
{
|
||||
struct s5p_serial_platdata *plat = dev->platdata;
|
||||
fdt_addr_t addr;
|
||||
|
||||
addr = devfdt_get_addr(dev);
|
||||
if (addr == FDT_ADDR_T_NONE)
|
||||
return -EINVAL;
|
||||
|
||||
plat->reg = (struct s5p_uart *)addr;
|
||||
plat->port_id = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
|
||||
"id", dev->seq);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct dm_serial_ops s5p_serial_ops = {
|
||||
.putc = s5p_serial_putc,
|
||||
.pending = s5p_serial_pending,
|
||||
.getc = s5p_serial_getc,
|
||||
.setbrg = s5p_serial_setbrg,
|
||||
};
|
||||
|
||||
static const struct udevice_id s5p_serial_ids[] = {
|
||||
{ .compatible = "samsung,exynos4210-uart" },
|
||||
{ }
|
||||
};
|
||||
|
||||
U_BOOT_DRIVER(serial_s5p) = {
|
||||
.name = "serial_s5p",
|
||||
.id = UCLASS_SERIAL,
|
||||
.of_match = s5p_serial_ids,
|
||||
.ofdata_to_platdata = s5p_serial_ofdata_to_platdata,
|
||||
.platdata_auto_alloc_size = sizeof(struct s5p_serial_platdata),
|
||||
.probe = s5p_serial_probe,
|
||||
.ops = &s5p_serial_ops,
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_DEBUG_UART_S5P
|
||||
|
||||
#include <debug_uart.h>
|
||||
|
||||
static inline void _debug_uart_init(void)
|
||||
{
|
||||
struct s5p_uart *uart = (struct s5p_uart *)CONFIG_DEBUG_UART_BASE;
|
||||
|
||||
s5p_serial_init(uart);
|
||||
s5p_serial_baud(uart, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE);
|
||||
}
|
||||
|
||||
static inline void _debug_uart_putc(int ch)
|
||||
{
|
||||
struct s5p_uart *uart = (struct s5p_uart *)CONFIG_DEBUG_UART_BASE;
|
||||
|
||||
while (readl(&uart->ufstat) & TX_FIFO_FULL);
|
||||
|
||||
writeb(ch, &uart->utxh);
|
||||
}
|
||||
|
||||
DEBUG_UART_FUNCS
|
||||
|
||||
#endif
|
||||
Reference in New Issue
Block a user