GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)

source/bootloader/u-boot-2020.01/drivers/usb/host/ehci-spear.c

@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2010
+ * Armando Visconti, ST Micoelectronics, <armando.visconti@st.com>.
+ *
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <usb.h>
+#include "ehci.h"
+#include <asm/arch/hardware.h>
+#include <asm/arch/spr_misc.h>
+
+static void spear6xx_usbh_stop(void)
+{
+	struct misc_regs *const misc_p =
+	    (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+	u32 periph1_rst = readl(misc_p->periph1_rst);
+
+	periph1_rst |= PERIPH_USBH1 | PERIPH_USBH2;
+	writel(periph1_rst, misc_p->periph1_rst);
+
+	udelay(1000);
+	periph1_rst &= ~(PERIPH_USBH1 | PERIPH_USBH2);
+	writel(periph1_rst, misc_p->periph1_rst);
+}
+
+/*
+ * Create the appropriate control structures to manage
+ * a new EHCI host controller.
+ */
+int ehci_hcd_init(int index, enum usb_init_type init,
+		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+{
+	u32 ehci = 0;
+
+	switch (index) {
+	case 0:
+		ehci = CONFIG_SYS_UHC0_EHCI_BASE;
+		break;
+	case 1:
+		ehci = CONFIG_SYS_UHC1_EHCI_BASE;
+		break;
+	default:
+		printf("ERROR: wrong controller index!\n");
+		break;
+	};
+
+	*hccr = (struct ehci_hccr *)(ehci + 0x100);
+	*hcor = (struct ehci_hcor *)((uint32_t) *hccr +
+			HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
+
+	debug("SPEAr-ehci: init hccr %x and hcor %x hc_length %d\n",
+		(uint32_t)*hccr, (uint32_t)*hcor,
+		(uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
+
+	return 0;
+}
+
+/*
+ * Destroy the appropriate control structures corresponding
+ * the the EHCI host controller.
+ */
+int ehci_hcd_stop(int index)
+{
+#if defined(CONFIG_SPEAR600)
+	spear6xx_usbh_stop();
+#endif
+
+	return 0;
+}