lai/gk-sdk
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)

Browse Source
This commit is contained in:
lai
2026-09-06 03:52:57 +08:00
commit b1928b41c0
21813 changed files with 4413081 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files
source/trusted-firmware/trusted-firmware-a-2.8/docs/plat/marvell/armada/build.rst
+476
View File
@@ -0,0 +1,476 @@
TF-A Build Instructions for Marvell Platforms
=============================================
This section describes how to compile the Trusted Firmware-A (TF-A) project for Marvell's platforms.
Build Instructions
------------------
(1) Set the cross compiler
.. code:: shell
> export CROSS_COMPILE=/path/to/toolchain/aarch64-linux-gnu-
(2) Set path for FIP images:
Set U-Boot image path (relatively to TF-A root or absolute path)
.. code:: shell
> export BL33=path/to/u-boot.bin
For example: if U-Boot project (and its images) is located at ``~/project/u-boot``,
BL33 should be ``~/project/u-boot/u-boot.bin``
.. note::
*u-boot.bin* should be used and not *u-boot-spl.bin*
Set MSS/SCP image path (mandatory only for A7K/A8K/CN913x when MSS_SUPPORT=1)
.. code:: shell
> export SCP_BL2=path/to/mrvl_scp_bl2*.img
(3) Armada-37x0 build requires WTP tools installation.
See below in the section "Tools and external components installation".
Install ARM 32-bit cross compiler, which is required for building WTMI image for CM3
.. code:: shell
> sudo apt-get install gcc-arm-linux-gnueabi
(4) Clean previous build residuals (if any)
.. code:: shell
> make distclean
(5) Build TF-A
There are several build options:
- PLAT
Supported Marvell platforms are:
- a3700 - A3720 DB, EspressoBin and Turris MOX
- a70x0
- a70x0_amc - AMC board
- a70x0_mochabin - Globalscale MOCHAbin
- a80x0
- a80x0_mcbin - MacchiatoBin
- a80x0_puzzle - IEI Puzzle-M801
- t9130 - CN913x
- t9130_cex7_eval - CN913x CEx7 Evaluation Board
- DEBUG
Default is without debug information (=0). in order to enable it use ``DEBUG=1``.
Can be enabled also when building UART recovery images, there is no issue with it.
Production TF-A images should be built without this debug option!
- LOG_LEVEL
Defines the level of logging which will be purged to the default output port.
- 0 - LOG_LEVEL_NONE
- 10 - LOG_LEVEL_ERROR
- 20 - LOG_LEVEL_NOTICE (default for DEBUG=0)
- 30 - LOG_LEVEL_WARNING
- 40 - LOG_LEVEL_INFO (default for DEBUG=1)
- 50 - LOG_LEVEL_VERBOSE
- USE_COHERENT_MEM
This flag determines whether to include the coherent memory region in the
BL memory map or not. Enabled by default.
- LLC_ENABLE
Flag defining the LLC (L3) cache state. The cache is enabled by default (``LLC_ENABLE=1``).
- LLC_SRAM
Flag enabling the LLC (L3) cache SRAM support. The LLC SRAM is activated and used
by Trusted OS (OP-TEE OS, BL32). The TF-A only prepares CCU address translation windows
for SRAM address range at BL31 execution stage with window target set to DRAM-0.
When Trusted OS activates LLC SRAM, the CCU window target is changed to SRAM.
There is no reason to enable this feature if OP-TEE OS built with CFG_WITH_PAGER=n.
Only set LLC_SRAM=1 if OP-TEE OS is built with CFG_WITH_PAGER=y.
- MARVELL_SECURE_BOOT
Build trusted(=1)/non trusted(=0) image, default is non trusted.
This parameter is used only for ``mrvl_flash`` and ``mrvl_uart`` targets.
- MV_DDR_PATH
This parameter is required for ``mrvl_flash`` and ``mrvl_uart`` targets.
For A7K/A8K/CN913x it is used for BLE build and for Armada37x0 it used
for ddr_tool build.
Specify path to the full checkout of Marvell mv-ddr-marvell git
repository. Checkout must contain also .git subdirectory because
mv-ddr build process calls git commands.
Do not remove any parts of git checkout becuase build process and other
applications need them for correct building and version determination.
CN913x specific build options:
- CP_NUM
Total amount of CPs (South Bridge) connected to AP. When the parameter is omitted,
the build uses the default number of CPs, which is a number of embedded CPs inside the
package: 1 or 2 depending on the SoC used. The parameter is valid for OcteonTX2 CN913x SoC
family (PLAT=t9130), which can have external CPs connected to the MCI ports. Valid
values with CP_NUM are in a range of 1 to 3.
A7K/A8K/CN913x specific build options:
- BLE_PATH
Points to BLE (Binary ROM extension) sources folder.
The parameter is optional, its default value is ``plat/marvell/armada/a8k/common/ble``
which uses TF-A in-tree BLE implementation.
- MSS_SUPPORT
When ``MSS_SUPPORT=1``, then TF-A includes support for Management SubSystem (MSS).
When enabled it is required to specify path to the MSS firmware image via ``SCP_BL2``
option.
This option is by default enabled.
- SCP_BL2
Specify path to the MSS fimware image binary which will run on Cortex-M3 coprocessor.
It is available in Marvell binaries-marvell git repository. Required when ``MSS_SUPPORT=1``.
Globalscale MOCHAbin specific build options:
- DDR_TOPOLOGY
The DDR topology map index/name, default is 0.
Supported Options:
- 0 - DDR4 1CS 2GB
- 1 - DDR4 1CS 4GB
- 2 - DDR4 2CS 8GB
Armada37x0 specific build options:
- HANDLE_EA_EL3_FIRST_NS
When ``HANDLE_EA_EL3_FIRST_NS=1``, External Aborts and SError Interrupts, resulting from errors
in NS world, will be always trapped in TF-A. TF-A in this case enables dirty hack / workaround for
a bug found in U-Boot and Linux kernel PCIe controller driver pci-aardvark.c, traps and then masks
SError interrupt caused by AXI SLVERR on external access (syndrome 0xbf000002).
Otherwise when ``HANDLE_EA_EL3_FIRST_NS=0``, these exceptions will be trapped in the current
exception level (or in EL1 if the current exception level is EL0). So exceptions caused by
U-Boot will be trapped in U-Boot, exceptions caused by Linux kernel (or user applications)
will be trapped in Linux kernel.
Mentioned bug in pci-aardvark.c driver is fixed in U-Boot version v2021.07 and Linux kernel
version v5.13 (workarounded since Linux kernel version 5.9) and also backported in Linux
kernel stable releases since versions v5.12.13, v5.10.46, v5.4.128, v4.19.198, v4.14.240.
If target system has already patched version of U-Boot and Linux kernel then it is strongly
recommended to not enable this workaround as it disallows propagating of all External Aborts
to running Linux kernel and makes correctable errors as fatal aborts.
This option is now disabled by default. In past this option has different name "HANDLE_EA_EL3_FIRST" and
was enabled by default in TF-A versions v2.2, v2.3, v2.4 and v2.5.
- CM3_SYSTEM_RESET
When ``CM3_SYSTEM_RESET=1``, the Cortex-M3 secure coprocessor will be used for system reset.
TF-A will send command 0x0009 with a magic value via the rWTM mailbox interface to the
Cortex-M3 secure coprocessor.
The firmware running in the coprocessor must either implement this functionality or
ignore the 0x0009 command (which is true for the firmware from A3700-utils-marvell
repository). If this option is enabled but the firmware does not support this command,
an error message will be printed prior trying to reboot via the usual way.
This option is needed on Turris MOX as a workaround to a HW bug which causes reset to
sometime hang the board.
- A3720_DB_PM_WAKEUP_SRC
For Armada 3720 Development Board only, when ``A3720_DB_PM_WAKEUP_SRC=1``,
TF-A will setup PM wake up src configuration. This option is disabled by default.
Armada37x0 specific build options for ``mrvl_flash`` and ``mrvl_uart`` targets:
- DDR_TOPOLOGY
The DDR topology map index/name, default is 0.
Supported Options:
- 0 - DDR3 1CS 512MB (DB-88F3720-DDR3-Modular, EspressoBin V3-V5)
- 1 - DDR4 1CS 512MB (DB-88F3720-DDR4-Modular)
- 2 - DDR3 2CS 1GB (EspressoBin V3-V5)
- 3 - DDR4 2CS 4GB (DB-88F3720-DDR4-Modular)
- 4 - DDR3 1CS 1GB (DB-88F3720-DDR3-Modular, EspressoBin V3-V5)
- 5 - DDR4 1CS 1GB (EspressoBin V7, EspressoBin-Ultra)
- 6 - DDR4 2CS 2GB (EspressoBin V7)
- 7 - DDR3 2CS 2GB (EspressoBin V3-V5)
- CUST - CUSTOMER BOARD (Customer board settings)
- CLOCKSPRESET
The clock tree configuration preset including CPU and DDR frequency,
default is CPU_800_DDR_800.
- CPU_600_DDR_600 - CPU at 600 MHz, DDR at 600 MHz
- CPU_800_DDR_800 - CPU at 800 MHz, DDR at 800 MHz
- CPU_1000_DDR_800 - CPU at 1000 MHz, DDR at 800 MHz
- CPU_1200_DDR_750 - CPU at 1200 MHz, DDR at 750 MHz
Look at Armada37x0 chip package marking on board to identify correct CPU frequency.
The last line on package marking (next line after the 88F37x0 line) should contain:
- C080 or I080 - chip with 800 MHz CPU - use ``CLOCKSPRESET=CPU_800_DDR_800``
- C100 or I100 - chip with 1000 MHz CPU - use ``CLOCKSPRESET=CPU_1000_DDR_800``
- C120 - chip with 1200 MHz CPU - use ``CLOCKSPRESET=CPU_1200_DDR_750``
- BOOTDEV
The flash boot device, default is ``SPINOR``.
Currently, Armada37x0 only supports ``SPINOR``, ``SPINAND``, ``EMMCNORM`` and ``SATA``:
- SPINOR - SPI NOR flash boot
- SPINAND - SPI NAND flash boot
- EMMCNORM - eMMC Download Mode
Download boot loader or program code from eMMC flash into CM3 or CA53
Requires full initialization and command sequence
- SATA - SATA device boot
Image needs to be stored at disk LBA 0 or at disk partition with
MBR type 0x4d (ASCII 'M' as in Marvell) or at disk partition with
GPT partition type GUID ``6828311A-BA55-42A4-BCDE-A89BB5EDECAE``.
- PARTNUM
The boot partition number, default is 0.
To boot from eMMC, the value should be aligned with the parameter in
U-Boot with name of ``CONFIG_SYS_MMC_ENV_PART``, whose value by default is
1. For details about CONFIG_SYS_MMC_ENV_PART, please refer to the U-Boot
build instructions.
- WTMI_IMG
The path of the binary can point to an image which
does nothing, an image which supports EFUSE or a customized CM3 firmware
binary. The default image is ``fuse.bin`` that built from sources in WTP
folder, which is the next option. If the default image is OK, then this
option should be skipped.
Please note that this is not a full WTMI image, just a main loop without
hardware initialization code. Final WTMI image is built from this WTMI_IMG
binary and sys-init code from the WTP directory which sets DDR and CPU
clocks according to DDR_TOPOLOGY and CLOCKSPRESET options.
CZ.NIC as part of Turris project released free and open source WTMI
application firmware ``wtmi_app.bin`` for all Armada 3720 devices.
This firmware includes additional features like access to Hardware
Random Number Generator of Armada 3720 SoC which original Marvell's
``fuse.bin`` image does not have.
CZ.NIC's Armada 3720 Secure Firmware is available at website:
https://gitlab.nic.cz/turris/mox-boot-builder/
- WTP
Specify path to the full checkout of Marvell A3700-utils-marvell git
repository. Checkout must contain also .git subdirectory because WTP
build process calls git commands.
WTP build process uses also Marvell mv-ddr-marvell git repository
specified in MV_DDR_PATH option.
Do not remove any parts of git checkout becuase build process and other
applications need them for correct building and version determination.
- CRYPTOPP_PATH
Use this parameter to point to Crypto++ source code
directory. If this option is specified then Crypto++ source code in
CRYPTOPP_PATH directory will be automatically compiled. Crypto++ library
is required for building WTP image tool. Either CRYPTOPP_PATH or
CRYPTOPP_LIBDIR with CRYPTOPP_INCDIR needs to be specified for Armada37x0.
- CRYPTOPP_LIBDIR
Use this parameter to point to the directory with
compiled Crypto++ library. By default it points to the CRYPTOPP_PATH.
On Debian systems it is possible to install system-wide Crypto++ library
via command ``apt install libcrypto++-dev`` and specify CRYPTOPP_LIBDIR
to ``/usr/lib/``.
- CRYPTOPP_INCDIR
Use this parameter to point to the directory with
header files of Crypto++ library. By default it points to the CRYPTOPP_PATH.
On Debian systems it is possible to install system-wide Crypto++ library
via command ``apt install libcrypto++-dev`` and specify CRYPTOPP_INCDIR
to ``/usr/include/crypto++/``.
For example, in order to build the image in debug mode with log level up to 'notice' level run
.. code:: shell
> make DEBUG=1 USE_COHERENT_MEM=0 LOG_LEVEL=20 PLAT=<MARVELL_PLATFORM> mrvl_flash
And if we want to build a Armada37x0 image in debug mode with log level up to 'notice' level,
the image has the preset CPU at 1000 MHz, preset DDR3 at 800 MHz, the DDR topology of DDR4 2CS,
the image boot from SPI NOR flash partition 0, and the image is non trusted in WTP, the command
line is as following
.. code:: shell
> make DEBUG=1 USE_COHERENT_MEM=0 LOG_LEVEL=20 CLOCKSPRESET=CPU_1000_DDR_800 \
MARVELL_SECURE_BOOT=0 DDR_TOPOLOGY=3 BOOTDEV=SPINOR PARTNUM=0 PLAT=a3700 \
MV_DDR_PATH=/path/to/mv-ddr-marvell/ WTP=/path/to/A3700-utils-marvell/ \
CRYPTOPP_PATH=/path/to/cryptopp/ BL33=/path/to/u-boot.bin \
all fip mrvl_bootimage mrvl_flash mrvl_uart
To build just TF-A without WTMI image (useful for A3720 Turris MOX board), run following command:
.. code:: shell
> make USE_COHERENT_MEM=0 PLAT=a3700 CM3_SYSTEM_RESET=1 BL33=/path/to/u-boot.bin \
CROSS_COMPILE=aarch64-linux-gnu- mrvl_bootimage
Here is full example how to build production release of Marvell firmware image (concatenated
binary of Marvell's A3720 sys-init, CZ.NIC's Armada 3720 Secure Firmware, TF-A and U-Boot) for
EspressoBin board (PLAT=a3700) with 1GHz CPU (CLOCKSPRESET=CPU_1000_DDR_800) and
1GB DDR4 RAM (DDR_TOPOLOGY=5):
.. code:: shell
> git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
> git clone https://source.denx.de/u-boot/u-boot.git
> git clone https://github.com/weidai11/cryptopp.git
> git clone https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git
> git clone https://github.com/MarvellEmbeddedProcessors/A3700-utils-marvell.git
> git clone https://gitlab.nic.cz/turris/mox-boot-builder.git
> make -C u-boot CROSS_COMPILE=aarch64-linux-gnu- mvebu_espressobin-88f3720_defconfig u-boot.bin
> make -C mox-boot-builder CROSS_CM3=arm-linux-gnueabi- wtmi_app.bin
> make -C trusted-firmware-a CROSS_COMPILE=aarch64-linux-gnu- CROSS_CM3=arm-linux-gnueabi- \
USE_COHERENT_MEM=0 PLAT=a3700 CLOCKSPRESET=CPU_1000_DDR_800 DDR_TOPOLOGY=5 \
MV_DDR_PATH=$PWD/mv-ddr-marvell/ WTP=$PWD/A3700-utils-marvell/ \
CRYPTOPP_PATH=$PWD/cryptopp/ BL33=$PWD/u-boot/u-boot.bin \
WTMI_IMG=$PWD/mox-boot-builder/wtmi_app.bin FIP_ALIGN=0x100 mrvl_flash
Produced Marvell firmware flash image: ``trusted-firmware-a/build/a3700/release/flash-image.bin``
Special Build Flags
--------------------
- PLAT_RECOVERY_IMAGE_ENABLE
When set this option to enable secondary recovery function when build atf.
In order to build UART recovery image this operation should be disabled for
A7K/A8K/CN913x because of hardware limitation (boot from secondary image
can interrupt UART recovery process). This MACRO definition is set in
``plat/marvell/armada/a8k/common/include/platform_def.h`` file.
- DDR32
In order to work in 32bit DDR, instead of the default 64bit ECC DDR,
this flag should be set to 1.
For more information about build options, please refer to the
:ref:`Build Options` document.
Build output
------------
Marvell's TF-A compilation generates 8 files:
- ble.bin - BLe image (not available for Armada37x0)
- bl1.bin - BL1 image
- bl2.bin - BL2 image
- bl31.bin - BL31 image
- fip.bin - FIP image (contains BL2, BL31 & BL33 (U-Boot) images)
- boot-image.bin - TF-A image (contains BL1 and FIP images)
- flash-image.bin - Flashable Marvell firmware image. For Armada37x0 it
contains TIM, WTMI and boot-image.bin images. For other platforms it contains
BLe and boot-image.bin images. Should be placed on the boot flash/device.
- uart-images.tgz.bin - GZIPed TAR archive which contains Armada37x0 images
for booting via UART. Could be loaded via Marvell's WtpDownload tool from
A3700-utils-marvell repository.
Additional make target ``mrvl_bootimage`` produce ``boot-image.bin`` file. Target
``mrvl_flash`` produce final ``flash-image.bin`` file and target ``mrvl_uart``
produce ``uart-images.tgz.bin`` file.
Tools and external components installation
------------------------------------------
Armada37x0 Builds require installation of additional components
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(1) ARM cross compiler capable of building images for the service CPU (CM3).
This component is usually included in the Linux host packages.
On Debian/Ubuntu hosts the default GNU ARM tool chain can be installed
using the following command
.. code:: shell
> sudo apt-get install gcc-arm-linux-gnueabi
Only if required, the default tool chain prefix ``arm-linux-gnueabi-`` can be
overwritten using the environment variable ``CROSS_CM3``.
Example for BASH shell
.. code:: shell
> export CROSS_CM3=/opt/arm-cross/bin/arm-linux-gnueabi
(2) DDR initialization library sources (mv_ddr) available at the following repository
(use the "master" branch):
https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git
(3) Armada3700 tools available at the following repository
(use the "master" branch):
https://github.com/MarvellEmbeddedProcessors/A3700-utils-marvell.git
(4) Crypto++ library available at the following repository:
https://github.com/weidai11/cryptopp.git
(5) Optional CZ.NIC's Armada 3720 Secure Firmware:
https://gitlab.nic.cz/turris/mox-boot-builder.git
Armada70x0, Armada80x0 and CN913x Builds require installation of additional components
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(1) DDR initialization library sources (mv_ddr) available at the following repository
(use the "master" branch):
https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git
(2) MSS Management SubSystem Firmware available at the following repository
(use the "binaries-marvell-armada-SDK10.0.1.0" branch):
https://github.com/MarvellEmbeddedProcessors/binaries-marvell.git
source/trusted-firmware/trusted-firmware-a-2.8/docs/plat/marvell/armada/misc/mvebu-a8k-addr-map.rst
+49
View File
@@ -0,0 +1,49 @@
Address decoding flow and address translation units of Marvell Armada 8K SoC family
===================================================================================
::
+--------------------------------------------------------------------------------------------------+
| +-------------+ +--------------+ |
| | Memory +----- DRAM CS | |
|+------------+ +-----------+ +-----------+ | Controller | +--------------+ |
|| AP DMA | | | | | +-------------+ |
|| SD/eMMC | | CA72 CPUs | | AP MSS | +-------------+ |
|| MCI-0/1 | | | | | | Memory | |
|+------+-----+ +--+--------+ +--------+--+ +------------+ | Controller | +-------------+ |
| | | | | +----- Translaton | |AP | |
| | | | | | +-------------+ |Configuration| |
| | | +-----+ +-------------------------Space | |
| | | +-------------+ | CCU | +-------------+ |
| | | | MMU +---------+ Windows | +-----------+ +-------------+ |
| | +-| translation | | Lookup +---- +--------- AP SPI | |
| | +-------------+ | | | | +-------------+ |
| | +-------------+ | | | IO | +-------------+ |
| +------------| SMMU +---------+ | | Windows +--------- AP MCI0/1 | |
| | translation | +------------+ | Lookup | +-------------+ |
| +---------+---+ | | +-------------+ |
| - | | +--------- AP STM | |
| +----------------- | | +-------------+ |
| AP | | +-+---------+ |
+---------------------------------------------------------------|----------------------------------+
+-------------|-------------------------------------------------|----------------------------------+
| CP | +-------------+ +------+-----+ +-------------------+ |
| | | | | +------- SB CFG Space | |
| | | DIOB | | | +-------------------+ |
| | | Windows ----------------- IOB | +-------------------+ |
| | | Control | | Windows +------| SB PCIe-0 - PCIe2 | |
| | | | | Lookup | +-------------------+ |
| | +------+------+ | | +-------------------+ |
| | | | +------+ SB NAND | |
| | | +------+-----+ +-------------------+ |
| | | | |
| | | | |
| +------------------+ +------------+ +------+-----+ +-------------------+ |
| | Network Engine | | | | +------- SB SPI-0/SPI-1 | |
| | Security Engine | | PCIe, MSS | | RUNIT | +-------------------+ |
| | SATA, USB | | DMA | | Windows | +-------------------+ |
| | SD/eMMC | | | | Lookup +------- SB Device Bus | |
| | TDM, I2C | | | | | +-------------------+ |
| +------------------+ +------------+ +------------+ |
| |
+--------------------------------------------------------------------------------------------------+
source/trusted-firmware/trusted-firmware-a-2.8/docs/plat/marvell/armada/misc/mvebu-amb.rst
+58
View File
@@ -0,0 +1,58 @@
AMB - AXI MBUS address decoding
===============================
AXI to M-bridge decoding unit driver for Marvell Armada 8K and 8K+ SoCs.
The Runit offers a second level of address windows lookup. It is used to map
transaction towards the CD BootROM, SPI0, SPI1 and Device bus (NOR).
The Runit contains eight configurable windows. Each window defines a contiguous,
address space and the properties associated with that address space.
::
Unit Bank ATTR
Device-Bus DEV_BOOT_CS 0x2F
DEV_CS0 0x3E
DEV_CS1 0x3D
DEV_CS2 0x3B
DEV_CS3 0x37
SPI-0 SPI_A_CS0 0x1E
SPI_A_CS1 0x5E
SPI_A_CS2 0x9E
SPI_A_CS3 0xDE
SPI_A_CS4 0x1F
SPI_A_CS5 0x5F
SPI_A_CS6 0x9F
SPI_A_CS7 0xDF
SPI SPI_B_CS0 0x1A
SPI_B_CS1 0x5A
SPI_B_CS2 0x9A
SPI_B_CS3 0xDA
BOOT_ROM BOOT_ROM 0x1D
UART UART 0x01
Mandatory functions
-------------------
- marvell_get_amb_memory_map
Returns the AMB windows configuration and the number of windows
Mandatory structures
--------------------
- amb_memory_map
Array that include the configuration of the windows. Every window/entry is a
struct which has 2 parameters:
- Base address of the window
- Attribute of the window
Examples
--------
.. code:: c
struct addr_map_win amb_memory_map[] = {
{0xf900, AMB_DEV_CS0_ID},
};
source/trusted-firmware/trusted-firmware-a-2.8/docs/plat/marvell/armada/misc/mvebu-ccu.rst
+33
View File
@@ -0,0 +1,33 @@
Marvell CCU address decoding bindings
=====================================
CCU configuration driver (1st stage address translation) for Marvell Armada 8K and 8K+ SoCs.
The CCU node includes a description of the address decoding configuration.
Mandatory functions
-------------------
- marvell_get_ccu_memory_map
Return the CCU windows configuration and the number of windows of the
specific AP.
Mandatory structures
--------------------
- ccu_memory_map
Array that includes the configuration of the windows. Every window/entry is
a struct which has 3 parameters:
- Base address of the window
- Size of the window
- Target-ID of the window
Example
-------
.. code:: c
struct addr_map_win ccu_memory_map[] = {
{0x00000000f2000000, 0x00000000e000000, IO_0_TID}, /* IO window */
};
source/trusted-firmware/trusted-firmware-a-2.8/docs/plat/marvell/armada/misc/mvebu-io-win.rst
+46
View File
@@ -0,0 +1,46 @@
Marvell IO WIN address decoding bindings
========================================
IO Window configuration driver (2nd stage address translation) for Marvell Armada 8K and 8K+ SoCs.
The IO WIN includes a description of the address decoding configuration.
Transactions that are decoded by CCU windows as IO peripheral, have an additional
layer of decoding. This additional address decoding layer defines one of the
following targets:
- **0x0** = BootRom
- **0x1** = STM (Serial Trace Macro-cell, a programmer's port into trace stream)
- **0x2** = SPI direct access
- **0x3** = PCIe registers
- **0x4** = MCI Port
- **0x5** = PCIe port
Mandatory functions
-------------------
- marvell_get_io_win_memory_map
Returns the IO windows configuration and the number of windows of the
specific AP.
Mandatory structures
--------------------
- io_win_memory_map
Array that include the configuration of the windows. Every window/entry is
a struct which has 3 parameters:
- Base address of the window
- Size of the window
- Target-ID of the window
Example
-------
.. code:: c
struct addr_map_win io_win_memory_map[] = {
{0x00000000fe000000, 0x000000001f00000, PCIE_PORT_TID}, /* PCIe window 31Mb for PCIe port*/
{0x00000000ffe00000, 0x000000000100000, PCIE_REGS_TID}, /* PCI-REG window 64Kb for PCIe-reg*/
{0x00000000f6000000, 0x000000000100000, MCIPHY_TID}, /* MCI window 1Mb for PHY-reg*/
};
source/trusted-firmware/trusted-firmware-a-2.8/docs/plat/marvell/armada/misc/mvebu-iob.rst
+52
View File
@@ -0,0 +1,52 @@
Marvell IOB address decoding bindings
=====================================
IO bridge configuration driver (3rd stage address translation) for Marvell Armada 8K and 8K+ SoCs.
The IOB includes a description of the address decoding configuration.
IOB supports up to n (in CP110 n=24) windows for external memory transaction.
When a transaction passes through the IOB, its address is compared to each of
the enabled windows. If there is a hit and it passes the security checks, it is
advanced to the target port.
Mandatory functions
-------------------
- marvell_get_iob_memory_map
Returns the IOB windows configuration and the number of windows
Mandatory structures
--------------------
- iob_memory_map
Array that includes the configuration of the windows. Every window/entry is
a struct which has 3 parameters:
- Base address of the window
- Size of the window
- Target-ID of the window
Target ID options
-----------------
- **0x0** = Internal configuration space
- **0x1** = MCI0
- **0x2** = PEX1_X1
- **0x3** = PEX2_X1
- **0x4** = PEX0_X4
- **0x5** = NAND flash
- **0x6** = RUNIT (NOR/SPI/BootRoom)
- **0x7** = MCI1
Example
-------
.. code:: c
struct addr_map_win iob_memory_map[] = {
{0x00000000f7000000, 0x0000000001000000, PEX1_TID}, /* PEX1_X1 window */
{0x00000000f8000000, 0x0000000001000000, PEX2_TID}, /* PEX2_X1 window */
{0x00000000f6000000, 0x0000000001000000, PEX0_TID}, /* PEX0_X4 window */
{0x00000000f9000000, 0x0000000001000000, NAND_TID} /* NAND window */
};
source/trusted-firmware/trusted-firmware-a-2.8/docs/plat/marvell/armada/porting.rst
+158
View File
@@ -0,0 +1,158 @@
TF-A Porting Guide for Marvell Platforms
========================================
This section describes how to port TF-A to a customer board, assuming that the
SoC being used is already supported in TF-A.
Source Code Structure
---------------------
- The customer platform specific code shall reside under ``plat/marvell/armada/<soc family>/<soc>_cust``
(e.g. 'plat/marvell/armada/a8k/a7040_cust').
- The platform name for build purposes is called ``<soc>_cust`` (e.g. ``a7040_cust``).
- The build system will reuse all files from within the soc directory, and take only the porting
files from the customer platform directory.
Files that require porting are located at ``plat/marvell/armada/<soc family>/<soc>_cust`` directory.
Armada-70x0/Armada-80x0 Porting
-------------------------------
SoC Physical Address Map (marvell_plat_config.c)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This file describes the SoC physical memory mapping to be used for the CCU,
IOWIN, AXI-MBUS and IOB address decode units (Refer to the functional spec for
more details).
In most cases, using the default address decode windows should work OK.
In cases where a special physical address map is needed (e.g. Special size for
PCIe MEM windows, large memory mapped SPI flash...), then porting of the SoC
memory map is required.
.. note::
For a detailed information on how CCU, IOWIN, AXI-MBUS & IOB work, please
refer to the SoC functional spec, and under
``docs/plat/marvell/armada/misc/mvebu-[ccu/iob/amb/io-win].rst`` files.
boot loader recovery (marvell_plat_config.c)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- Background:
Boot rom can skip the current image and choose to boot from next position if a
specific value (``0xDEADB002``) is returned by the ble main function. This
feature is used for boot loader recovery by booting from a valid flash-image
saved in next position on flash (e.g. address 2M in SPI flash).
Supported options to implement the skip request are:
- GPIO
- I2C
- User defined
- Porting:
Under marvell_plat_config.c, implement struct skip_image that includes
specific board parameters.
.. warning::
To disable this feature make sure the struct skip_image is not implemented.
- Example:
In A7040-DB specific implementation
(``plat/marvell/armada/a8k/a70x0/board/marvell_plat_config.c``), the image skip is
implemented using GPIO: mpp 33 (SW5).
Before resetting the board make sure there is a valid image on the next flash
address:
-tftp [valid address] flash-image.bin
-sf update [valid address] 0x2000000 [size]
Press reset and keep pressing the button connected to the chosen GPIO pin. A
skip image request message is printed on the screen and boot rom boots from the
saved image at the next position.
DDR Porting (dram_port.c)
~~~~~~~~~~~~~~~~~~~~~~~~~
This file defines the dram topology and parameters of the target board.
The DDR code is part of the BLE component, which is an extension of ARM Trusted
Firmware (TF-A).
The DDR driver called mv_ddr is released separately apart from TF-A sources.
The BLE and consequently, the DDR init code is executed at the early stage of
the boot process.
Each supported platform of the TF-A has its own DDR porting file called
dram_port.c located at ``atf/plat/marvell/armada/a8k/<platform>/board`` directory.
Please refer to '<path_to_mv_ddr_sources>/doc/porting_guide.txt' for detailed
porting description.
The build target directory is "build/<platform>/release/ble".
Comphy Porting (phy-porting-layer.h or phy-default-porting-layer.h)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- Background:
Some of the comphy's parameters value depend on the HW connection between
the SoC and the PHY. Every board type has specific HW characteristics like
wire length. Due to those differences some comphy parameters vary between
board types. Therefore each board type can have its own list of values for
all relevant comphy parameters. The PHY porting layer specifies which
parameters need to be suited and the board designer should provide relevant
values.
The PHY porting layer simplifies updating static values per board type,
which are now grouped in one place.
.. note::
The parameters for the same type of comphy may vary even for the same
board type, it is because the lanes from comphy-x to some PHY may have
different HW characteristic than lanes from comphy-y to the same
(multiplexed) or other PHY.
- Porting:
The porting layer for PHY was introduced in TF-A. There is one file
``drivers/marvell/comphy/phy-default-porting-layer.h`` which contains the
defaults. Those default parameters are used only if there is no appropriate
phy-porting-layer.h file under: ``plat/marvell/armada/<soc
family>/<platform>/board/phy-porting-layer.h``. If the phy-porting-layer.h
exists, the phy-default-porting-layer.h is not going to be included.
.. warning::
Not all comphy types are already reworked to support the PHY porting
layer, currently the porting layer is supported for XFI/SFI and SATA
comphy types.
The easiest way to prepare the PHY porting layer for custom board is to copy
existing example to a new platform:
- cp ``plat/marvell/armada/a8k/a80x0/board/phy-porting-layer.h`` "plat/marvell/armada/<soc family>/<platform>/board/phy-porting-layer.h"
- adjust relevant parameters or
- if different comphy index is used for specific feature, move it to proper table entry and then adjust.
.. note::
The final table size with comphy parameters can be different, depending
on the CP module count for given SoC type.
- Example:
Example porting layer for armada-8040-db is under:
``plat/marvell/armada/a8k/a80x0/board/phy-porting-layer.h``
.. note::
If there is no PHY porting layer for new platform (missing
phy-porting-layer.h), the default values are used
(drivers/marvell/comphy/phy-default-porting-layer.h) and the user is
warned:
.. warning::
"Using default comphy parameters - it may be required to suit them for
your board".
source/trusted-firmware/trusted-firmware-a-2.8/docs/plat/marvell/armada/uart-booting.rst
+103
View File
@@ -0,0 +1,103 @@
TF-A UART Booting Instructions for Marvell Platforms
====================================================
This section describes how to temporary boot the Trusted Firmware-A (TF-A) project over UART
without flashing it to non-volatile storage for Marvell's platforms.
See :ref:`TF-A Build Instructions for Marvell Platforms` how to build ``mrvl_uart`` and
``mrvl_flash`` targets used in this section.
Armada37x0 UART image downloading
---------------------------------
There are two options how to download UART image into any Armada37x0 board.
Marvell Wtpdownloader
~~~~~~~~~~~~~~~~~~~~~
Marvell Wtpdownloader works only with UART images stored in separate files and supports only upload
speed with 115200 bauds. Target ``mrvl_uart`` produces GZIPed TAR archive ``uart-images.tgz.bin``
with either three files ``TIM_ATF.bin``, ``wtmi_h.bin`` and ``boot-image_h.bin`` for non-secure
boot or with four files ``TIM_ATF_TRUSTED.bin``, ``TIMN_ATF_TRUSTED.bin``, ``wtmi_h.bin`` and
``boot-image_h.bin`` when secure boot is enabled.
Compilation:
.. code:: shell
> git clone https://github.com/MarvellEmbeddedProcessors/A3700-utils-marvell.git
> make -C A3700-utils-marvell/wtptp/src/Wtpdownloader_Linux -f makefile.mk
It produces executable binary ``A3700-utils-marvell/wtptp/src/Wtpdownloader_Linux/WtpDownload_linux``
To download images from ``uart-images.tgz.bin`` archive unpack it and for non-secure boot variant run:
.. code:: shell
> stty -F /dev/ttyUSB<port#> clocal
> WtpDownload_linux -P UART -C <port#> -E -B TIM_ATF.bin -I wtmi_h.bin -I boot-image_h.bin
After that immediately start terminal on ``/dev/ttyUSB<port#>`` to see boot output.
CZ.NIC mox-imager
~~~~~~~~~~~~~~~~~
CZ.NIC mox-imager supports all Armada37x0 boards (not only Turris MOX as name suggests). It works
with either with separate files from ``uart-images.tgz.bin`` archive (like Marvell Wtpdownloader)
produced by ``mrvl_uart`` target or also with ``flash-image.bin`` file produced by ``mrvl_flash``
target, which is the exactly same file as used for flashing. So when using CZ.NIC mox-imager there
is no need to build separate files for UART flashing like in case with Marvell Wtpdownloader.
CZ.NIC mox-imager moreover supports higher upload speeds up to the 6000000 bauds (which seems to
be limit of Armada37x0 SoC) which is much higher and faster than Marvell Wtpdownloader.
Compilation:
.. code:: shell
> git clone https://gitlab.nic.cz/turris/mox-imager.git
> make -C mox-imager
It produces executable binary ``mox-imager/mox-imager``
To download single file image built by ``mrvl_flash`` target at the highest speed, run:
.. code:: shell
> mox-imager -D /dev/ttyUSB<port#> -E -b 6000000 -t flash-image.bin
To download images from ``uart-images.tgz.bin`` archive built by ``mrvl_uart`` target for
non-secure boot variant (like Wtpdownloader) but at the highest speed, first unpack
``uart-images.tgz.bin`` archive and then run:
.. code:: shell
> mox-imager -D /dev/ttyUSB<port#> -E -b 6000000 -t TIM_ATF.bin wtmi_h.bin boot-image_h.bin
CZ.NIC mox-imager after successful download will start its own mini terminal (option ``-t``) to
not loose any boot output. It also prints boot output which is sent either by image files or by
bootrom during transferring of image files. This mini terminal can be quit by CTRL-\\ + C keypress.
A7K/A8K/CN913x UART image downloading
-------------------------------------
A7K/A8K/CN913x uses same image ``flash-image.bin`` for both flashing and booting over UART.
For downloading image over UART it is possible to use mvebu64boot tool.
Compilation:
.. code:: shell
> git clone https://github.com/pali/mvebu64boot.git
> make -C mvebu64boot
It produces executable binary ``mvebu64boot/mvebu64boot``
To download ``flash-image.bin`` image run:
.. code:: shell
> mvebu64boot -t -b flash-image.bin /dev/ttyUSB0
After successful download it will start own mini terminal (option ``-t``) like CZ.NIC mox-imager.
source/trusted-firmware/trusted-firmware-a-2.8/docs/plat/marvell/index.rst
+15
View File
@@ -0,0 +1,15 @@
Marvell
=======
.. toctree::
:maxdepth: 1
:caption: Contents
armada/build
armada/uart-booting
armada/porting
armada/misc/mvebu-a8k-addr-map
armada/misc/mvebu-amb
armada/misc/mvebu-ccu
armada/misc/mvebu-io-win
armada/misc/mvebu-iob