GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)

2026-09-06 03:52:57 +08:00
commit b1928b41c0
21813 changed files with 4413081 additions and 0 deletions
@@ -0,0 +1,117 @@
+Socionext Synquacer
+===================
+
+Socionext's Synquacer SC2A11 is a multi-core processor with 24 cores of Arm
+Cortex-A53. The Developerbox, of 96boards, is a platform that contains this
+processor. This port of the Trusted Firmware only supports this platform at
+the moment.
+
+More information are listed in `link`_.
+
+How to build
+------------
+
+Code Locations
+~~~~~~~~~~~~~~
+
+-  Trusted Firmware-A:
+   `link <https://github.com/ARM-software/arm-trusted-firmware>`__
+
+-  edk2:
+   `link <https://github.com/tianocore/edk2>`__
+
+-  edk2-platforms:
+   `link <https://github.com/tianocore/edk2-platforms>`__
+
+-  edk2-non-osi:
+   `link <https://github.com/tianocore/edk2-non-osi>`__
+
+Boot Flow
+~~~~~~~~~
+
+SCP firmware --> TF-A BL31 --> UEFI(edk2)
+
+Build Procedure
+~~~~~~~~~~~~~~~
+
+-  Firstly, in addition to the “normal” build tools you will also need a
+   few specialist tools. On a Debian or Ubuntu operating system try:
+
+   .. code:: shell
+
+       sudo apt install acpica-tools device-tree-compiler uuid-dev
+
+-  Secondly, create a new working directory and store the absolute path to this
+   directory in an environment variable, WORKSPACE. It does not matter where
+   this directory is created but as an example:
+
+   .. code:: shell
+
+       export WORKSPACE=$HOME/build/developerbox-firmware
+       mkdir -p $WORKSPACE
+
+-  Run the following commands to clone the source code:
+
+   .. code:: shell
+
+       cd $WORKSPACE
+       git clone https://github.com/ARM-software/arm-trusted-firmware -b master
+       git clone https://github.com/tianocore/edk2.git -b master
+       git clone https://github.com/tianocore/edk2-platforms.git -b master
+       git clone https://github.com/tianocore/edk2-non-osi.git -b master
+
+-  Build ATF:
+
+   .. code:: shell
+
+       cd $WORKSPACE/arm-trusted-firmware
+       make -j`nproc` PLAT=synquacer PRELOADED_BL33_BASE=0x8200000 bl31 fiptool
+       tools/fiptool/fiptool create \
+             --tb-fw ./build/synquacer/release/bl31.bin \
+             --soc-fw ./build/synquacer/release/bl31.bin \
+             --scp-fw ./build/synquacer/release/bl31.bin \
+             ../edk2-non-osi/Platform/Socionext/DeveloperBox/fip_all_arm_tf.bin
+
+-  Build EDK2:
+
+   .. code:: shell
+
+       cd $WORKSPACE
+       export PACKAGES_PATH=$WORKSPACE/edk2:$WORKSPACE/edk2-platforms:$WORKSPACE/edk2-non-osi
+       export ACTIVE_PLATFORM="Platform/Socionext/DeveloperBox/DeveloperBox.dsc"
+       export GCC5_AARCH64_PREFIX=aarch64-linux-gnu-
+       unset ARCH
+
+       . edk2/edksetup.sh
+       make -C edk2/BaseTools
+
+       build -p $ACTIVE_PLATFORM -b RELEASE -a AARCH64 -t GCC5 -n `nproc` -D DO_X86EMU=TRUE
+
+-  The firmware image, which comprises the option ROM, ARM trusted firmware and
+   EDK2 itself, can be found $WORKSPACE/../Build/DeveloperBox/RELEASE_GCC5/FV/.
+   Use SYNQUACERFIRMWAREUPDATECAPSULEFMPPKCS7.Cap for UEFI capsule update and
+   SPI_NOR_IMAGE.fd for the serial flasher.
+
+   Note #1: -t GCC5 can be loosely translated as “enable link-time-optimization”;
+   any version of gcc >= 5 will support this feature and may be used to build EDK2.
+
+   Note #2: Replace -b RELEASE with -b DEBUG to build a debug.
+
+Install the System Firmware
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+-  Providing your Developerbox is fully working and has on operating system
+   installed then you can adopt your the newly compiled system firmware using
+   the capsule update method:.
+
+   .. code:: shell
+
+       sudo apt install fwupdate
+       sudo fwupdate --apply {50b94ce5-8b63-4849-8af4-ea479356f0e3} \
+                     SYNQUACERFIRMWAREUPDATECAPSULEFMPPKCS7.Cap
+       sudo reboot
+
+-  Alternatively you can install SPI_NOR_IMAGE.fd using the `board recovery method`_.
+
+.. _link: https://www.96boards.org/product/developerbox/
+.. _board recovery method: https://www.96boards.org/documentation/enterprise/developerbox/installation/board-recovery.md.html