GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)

source/trusted-firmware/trusted-firmware-a-2.8/drivers/marvell/mg_conf_cm3/mg_conf_cm3.c

@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <a8k_plat_def.h>
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <lib/mmio.h>
+#include <mss_scp_bl2_format.h>
+
+/* CONFI REGISTERS */
+#define MG_CM3_CONFI_BASE(CP)		(MVEBU_CP_REGS_BASE(CP) + 0x100000)
+#define MG_CM3_SRAM_BASE(CP)		MG_CM3_CONFI_BASE(CP)
+#define MG_CM3_CONFI_GLOB_CFG_REG(CP)	(MG_CM3_CONFI_BASE(CP) + 0x2B500)
+#define CM3_CPU_EN_BIT			BIT(28)
+#define MG_CM3_MG_INT_MFX_REG(CP)	(MG_CM3_CONFI_BASE(CP) + 0x2B054)
+#define CM3_SYS_RESET_BIT		BIT(0)
+
+#define MG_CM3_SHARED_MEM_BASE(CP)	(MG_CM3_SRAM_BASE(CP) + 0x1FC00ULL)
+
+#define MG_SRAM_SIZE	0x20000 /* 128KB */
+
+#define MG_ACK_TIMEOUT 10
+
+/**
+ * struct ap_sharedmem_ctrl - used to pass information between the HOST and CM3
+ * @init_done:	Set by CM3 when ap_proces initialzied. Host check if CM3 set
+ *		this flag to confirm that the process is running
+ * @lane_nr:	Set by Host to mark which comphy lane should be configure. E.g.:
+ *		- A8K development board uses comphy lane 2 for eth0
+ *		- CN913x development board uses comphy lane 4 for eth0
+ */
+struct ap_sharedmem_ctrl {
+	uint32_t init_done;
+	uint32_t lane_nr;
+};
+
+int mg_image_load(uintptr_t src_addr, uint32_t size, int cp_index)
+{
+	uintptr_t mg_regs = MG_CM3_SRAM_BASE(cp_index);
+
+	if (size > MG_SRAM_SIZE) {
+		ERROR("image is too big to fit into MG CM3 memory\n");
+		return 1;
+	}
+
+	NOTICE("Loading MG image from address 0x%lx Size 0x%x to MG at 0x%lx\n",
+	       src_addr, size, mg_regs);
+
+	/* Copy image to MG CM3 SRAM */
+	memcpy((void *)mg_regs, (void *)src_addr, size);
+
+	/* Don't release MG CM3 from reset - it will be done by next step
+	 * bootloader (e.g. U-Boot), when appriopriate device-tree setup (which
+	 * has enabeld 802.3. auto-neg) will be choosen.
+	 */
+
+	return 0;
+}
+
+void mg_start_ap_fw(int cp_nr, uint8_t comphy_index)
+{
+	volatile struct ap_sharedmem_ctrl *ap_shared_ctrl =
+					(void *)MG_CM3_SHARED_MEM_BASE(cp_nr);
+	int timeout = MG_ACK_TIMEOUT;
+
+	if (mmio_read_32(MG_CM3_CONFI_GLOB_CFG_REG(cp_nr)) & CM3_CPU_EN_BIT) {
+		VERBOSE("cm3 already running\n");
+		return;  /* cm3 already running */
+	}
+
+	/*
+	 * Mark which comphy lane should be used - it will be read via shared
+	 * mem by ap process
+	 */
+	ap_shared_ctrl->lane_nr = comphy_index;
+	/* Make sure it took place before enabling cm3 */
+	dmbst();
+
+	mmio_setbits_32(MG_CM3_CONFI_GLOB_CFG_REG(cp_nr), CM3_CPU_EN_BIT);
+	mmio_setbits_32(MG_CM3_MG_INT_MFX_REG(cp_nr), CM3_SYS_RESET_BIT);
+
+	/* Check for ap process initialization by fw */
+	while (ap_shared_ctrl->init_done != 1 && timeout--)
+		VERBOSE("Waiting for ap process ack, timeout %d\n", timeout);
+
+	if (timeout == 0) {
+		ERROR("AP process failed, disabling cm3\n");
+		mmio_clrbits_32(MG_CM3_MG_INT_MFX_REG(cp_nr),
+				CM3_SYS_RESET_BIT);
+		mmio_clrbits_32(MG_CM3_CONFI_GLOB_CFG_REG(cp_nr),
+				CM3_CPU_EN_BIT);
+	}
+}

source/trusted-firmware/trusted-firmware-a-2.8/drivers/marvell/mg_conf_cm3/mg_conf_cm3.h

@@ -0,0 +1,9 @@
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+void mg_start_ap_fw(int cp_nr, uint8_t comphy_index);
+int mg_image_load(uintptr_t src_addr, uint32_t size, int cp_index);