GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)
This commit is contained in:
@@ -0,0 +1,526 @@
|
||||
/*
|
||||
* Copyright (c) 2017-2022, STMicroelectronics - All Rights Reserved
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
#include <assert.h>
|
||||
#include <errno.h>
|
||||
|
||||
#include <common/debug.h>
|
||||
#include <drivers/delay_timer.h>
|
||||
#include <drivers/st/regulator.h>
|
||||
#include <drivers/st/stm32_i2c.h>
|
||||
#include <drivers/st/stm32mp_pmic.h>
|
||||
#include <drivers/st/stpmic1.h>
|
||||
#include <lib/mmio.h>
|
||||
#include <lib/utils_def.h>
|
||||
#include <libfdt.h>
|
||||
|
||||
#include <platform_def.h>
|
||||
|
||||
#define PMIC_NODE_NOT_FOUND 1
|
||||
|
||||
static struct i2c_handle_s i2c_handle;
|
||||
static uint32_t pmic_i2c_addr;
|
||||
|
||||
static int register_pmic(void);
|
||||
|
||||
static int dt_get_pmic_node(void *fdt)
|
||||
{
|
||||
static int node = -FDT_ERR_BADOFFSET;
|
||||
|
||||
if (node == -FDT_ERR_BADOFFSET) {
|
||||
node = fdt_node_offset_by_compatible(fdt, -1, "st,stpmic1");
|
||||
}
|
||||
|
||||
return node;
|
||||
}
|
||||
|
||||
int dt_pmic_status(void)
|
||||
{
|
||||
static int status = -FDT_ERR_BADVALUE;
|
||||
int node;
|
||||
void *fdt;
|
||||
|
||||
if (status != -FDT_ERR_BADVALUE) {
|
||||
return status;
|
||||
}
|
||||
|
||||
if (fdt_get_address(&fdt) == 0) {
|
||||
return -ENOENT;
|
||||
}
|
||||
|
||||
node = dt_get_pmic_node(fdt);
|
||||
if (node <= 0) {
|
||||
status = -FDT_ERR_NOTFOUND;
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
status = (int)fdt_get_status(node);
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
static bool dt_pmic_is_secure(void)
|
||||
{
|
||||
int status = dt_pmic_status();
|
||||
|
||||
return (status >= 0) &&
|
||||
(status == DT_SECURE) &&
|
||||
(i2c_handle.dt_status == DT_SECURE);
|
||||
}
|
||||
|
||||
/*
|
||||
* Get PMIC and its I2C bus configuration from the device tree.
|
||||
* Return 0 on success, negative on error, 1 if no PMIC node is defined.
|
||||
*/
|
||||
static int dt_pmic_i2c_config(struct dt_node_info *i2c_info,
|
||||
struct stm32_i2c_init_s *init)
|
||||
{
|
||||
static int i2c_node = -FDT_ERR_NOTFOUND;
|
||||
void *fdt;
|
||||
|
||||
if (fdt_get_address(&fdt) == 0) {
|
||||
return -FDT_ERR_NOTFOUND;
|
||||
}
|
||||
|
||||
if (i2c_node == -FDT_ERR_NOTFOUND) {
|
||||
int pmic_node;
|
||||
const fdt32_t *cuint;
|
||||
|
||||
pmic_node = dt_get_pmic_node(fdt);
|
||||
if (pmic_node < 0) {
|
||||
return PMIC_NODE_NOT_FOUND;
|
||||
}
|
||||
|
||||
cuint = fdt_getprop(fdt, pmic_node, "reg", NULL);
|
||||
if (cuint == NULL) {
|
||||
return -FDT_ERR_NOTFOUND;
|
||||
}
|
||||
|
||||
pmic_i2c_addr = fdt32_to_cpu(*cuint) << 1;
|
||||
if (pmic_i2c_addr > UINT16_MAX) {
|
||||
return -FDT_ERR_BADVALUE;
|
||||
}
|
||||
|
||||
i2c_node = fdt_parent_offset(fdt, pmic_node);
|
||||
if (i2c_node < 0) {
|
||||
return -FDT_ERR_NOTFOUND;
|
||||
}
|
||||
}
|
||||
|
||||
dt_fill_device_info(i2c_info, i2c_node);
|
||||
if (i2c_info->base == 0U) {
|
||||
return -FDT_ERR_NOTFOUND;
|
||||
}
|
||||
|
||||
return stm32_i2c_get_setup_from_fdt(fdt, i2c_node, init);
|
||||
}
|
||||
|
||||
bool initialize_pmic_i2c(void)
|
||||
{
|
||||
int ret;
|
||||
struct dt_node_info i2c_info;
|
||||
struct i2c_handle_s *i2c = &i2c_handle;
|
||||
struct stm32_i2c_init_s i2c_init;
|
||||
|
||||
ret = dt_pmic_i2c_config(&i2c_info, &i2c_init);
|
||||
if (ret < 0) {
|
||||
ERROR("I2C configuration failed %d\n", ret);
|
||||
panic();
|
||||
}
|
||||
|
||||
if (ret != 0) {
|
||||
return false;
|
||||
}
|
||||
|
||||
/* Initialize PMIC I2C */
|
||||
i2c->i2c_base_addr = i2c_info.base;
|
||||
i2c->dt_status = i2c_info.status;
|
||||
i2c->clock = i2c_info.clock;
|
||||
i2c->i2c_state = I2C_STATE_RESET;
|
||||
i2c_init.own_address1 = pmic_i2c_addr;
|
||||
i2c_init.addressing_mode = I2C_ADDRESSINGMODE_7BIT;
|
||||
i2c_init.dual_address_mode = I2C_DUALADDRESS_DISABLE;
|
||||
i2c_init.own_address2 = 0;
|
||||
i2c_init.own_address2_masks = I2C_OAR2_OA2NOMASK;
|
||||
i2c_init.general_call_mode = I2C_GENERALCALL_DISABLE;
|
||||
i2c_init.no_stretch_mode = I2C_NOSTRETCH_DISABLE;
|
||||
i2c_init.analog_filter = 1;
|
||||
i2c_init.digital_filter_coef = 0;
|
||||
|
||||
ret = stm32_i2c_init(i2c, &i2c_init);
|
||||
if (ret != 0) {
|
||||
ERROR("Cannot initialize I2C %x (%d)\n",
|
||||
i2c->i2c_base_addr, ret);
|
||||
panic();
|
||||
}
|
||||
|
||||
if (!stm32_i2c_is_device_ready(i2c, pmic_i2c_addr, 1,
|
||||
I2C_TIMEOUT_BUSY_MS)) {
|
||||
ERROR("I2C device not ready\n");
|
||||
panic();
|
||||
}
|
||||
|
||||
stpmic1_bind_i2c(i2c, (uint16_t)pmic_i2c_addr);
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
static void register_pmic_shared_peripherals(void)
|
||||
{
|
||||
uintptr_t i2c_base = i2c_handle.i2c_base_addr;
|
||||
|
||||
if (dt_pmic_is_secure()) {
|
||||
stm32mp_register_secure_periph_iomem(i2c_base);
|
||||
} else {
|
||||
if (i2c_base != 0U) {
|
||||
stm32mp_register_non_secure_periph_iomem(i2c_base);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void initialize_pmic(void)
|
||||
{
|
||||
if (!initialize_pmic_i2c()) {
|
||||
VERBOSE("No PMIC\n");
|
||||
return;
|
||||
}
|
||||
|
||||
register_pmic_shared_peripherals();
|
||||
|
||||
if (register_pmic() < 0) {
|
||||
panic();
|
||||
}
|
||||
|
||||
if (stpmic1_powerctrl_on() < 0) {
|
||||
panic();
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
#if DEBUG
|
||||
void print_pmic_info_and_debug(void)
|
||||
{
|
||||
unsigned long pmic_version;
|
||||
|
||||
if (stpmic1_get_version(&pmic_version) != 0) {
|
||||
ERROR("Failed to access PMIC\n");
|
||||
panic();
|
||||
}
|
||||
|
||||
INFO("PMIC version = 0x%02lx\n", pmic_version);
|
||||
}
|
||||
#endif
|
||||
|
||||
int pmic_ddr_power_init(enum ddr_type ddr_type)
|
||||
{
|
||||
int status;
|
||||
uint16_t buck3_min_mv;
|
||||
struct rdev *buck2, *buck3, *vref;
|
||||
struct rdev *ldo3 __unused;
|
||||
|
||||
buck2 = regulator_get_by_name("buck2");
|
||||
if (buck2 == NULL) {
|
||||
return -ENOENT;
|
||||
}
|
||||
|
||||
#if STM32MP15
|
||||
ldo3 = regulator_get_by_name("ldo3");
|
||||
if (ldo3 == NULL) {
|
||||
return -ENOENT;
|
||||
}
|
||||
#endif
|
||||
|
||||
vref = regulator_get_by_name("vref_ddr");
|
||||
if (vref == NULL) {
|
||||
return -ENOENT;
|
||||
}
|
||||
|
||||
switch (ddr_type) {
|
||||
case STM32MP_DDR3:
|
||||
#if STM32MP15
|
||||
status = regulator_set_flag(ldo3, REGUL_SINK_SOURCE);
|
||||
if (status != 0) {
|
||||
return status;
|
||||
}
|
||||
#endif
|
||||
|
||||
status = regulator_set_min_voltage(buck2);
|
||||
if (status != 0) {
|
||||
return status;
|
||||
}
|
||||
|
||||
status = regulator_enable(buck2);
|
||||
if (status != 0) {
|
||||
return status;
|
||||
}
|
||||
|
||||
status = regulator_enable(vref);
|
||||
if (status != 0) {
|
||||
return status;
|
||||
}
|
||||
|
||||
#if STM32MP15
|
||||
status = regulator_enable(ldo3);
|
||||
if (status != 0) {
|
||||
return status;
|
||||
}
|
||||
#endif
|
||||
break;
|
||||
|
||||
case STM32MP_LPDDR2:
|
||||
case STM32MP_LPDDR3:
|
||||
/*
|
||||
* Set LDO3 to 1.8V
|
||||
* Set LDO3 to bypass mode if BUCK3 = 1.8V
|
||||
* Set LDO3 to normal mode if BUCK3 != 1.8V
|
||||
*/
|
||||
buck3 = regulator_get_by_name("buck3");
|
||||
if (buck3 == NULL) {
|
||||
return -ENOENT;
|
||||
}
|
||||
|
||||
regulator_get_range(buck3, &buck3_min_mv, NULL);
|
||||
|
||||
#if STM32MP15
|
||||
if (buck3_min_mv != 1800) {
|
||||
status = regulator_set_min_voltage(ldo3);
|
||||
if (status != 0) {
|
||||
return status;
|
||||
}
|
||||
} else {
|
||||
status = regulator_set_flag(ldo3, REGUL_ENABLE_BYPASS);
|
||||
if (status != 0) {
|
||||
return status;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
status = regulator_set_min_voltage(buck2);
|
||||
if (status != 0) {
|
||||
return status;
|
||||
}
|
||||
|
||||
#if STM32MP15
|
||||
status = regulator_enable(ldo3);
|
||||
if (status != 0) {
|
||||
return status;
|
||||
}
|
||||
#endif
|
||||
|
||||
status = regulator_enable(buck2);
|
||||
if (status != 0) {
|
||||
return status;
|
||||
}
|
||||
|
||||
status = regulator_enable(vref);
|
||||
if (status != 0) {
|
||||
return status;
|
||||
}
|
||||
break;
|
||||
|
||||
default:
|
||||
break;
|
||||
};
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int pmic_voltages_init(void)
|
||||
{
|
||||
#if STM32MP13
|
||||
struct rdev *buck1, *buck4;
|
||||
int status;
|
||||
|
||||
buck1 = regulator_get_by_name("buck1");
|
||||
if (buck1 == NULL) {
|
||||
return -ENOENT;
|
||||
}
|
||||
|
||||
buck4 = regulator_get_by_name("buck4");
|
||||
if (buck4 == NULL) {
|
||||
return -ENOENT;
|
||||
}
|
||||
|
||||
status = regulator_set_min_voltage(buck1);
|
||||
if (status != 0) {
|
||||
return status;
|
||||
}
|
||||
|
||||
status = regulator_set_min_voltage(buck4);
|
||||
if (status != 0) {
|
||||
return status;
|
||||
}
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
enum {
|
||||
STPMIC1_BUCK1 = 0,
|
||||
STPMIC1_BUCK2,
|
||||
STPMIC1_BUCK3,
|
||||
STPMIC1_BUCK4,
|
||||
STPMIC1_LDO1,
|
||||
STPMIC1_LDO2,
|
||||
STPMIC1_LDO3,
|
||||
STPMIC1_LDO4,
|
||||
STPMIC1_LDO5,
|
||||
STPMIC1_LDO6,
|
||||
STPMIC1_VREF_DDR,
|
||||
STPMIC1_BOOST,
|
||||
STPMIC1_VBUS_OTG,
|
||||
STPMIC1_SW_OUT,
|
||||
};
|
||||
|
||||
static int pmic_set_state(const struct regul_description *desc, bool enable)
|
||||
{
|
||||
VERBOSE("%s: set state to %d\n", desc->node_name, enable);
|
||||
|
||||
if (enable == STATE_ENABLE) {
|
||||
return stpmic1_regulator_enable(desc->node_name);
|
||||
} else {
|
||||
return stpmic1_regulator_disable(desc->node_name);
|
||||
}
|
||||
}
|
||||
|
||||
static int pmic_get_state(const struct regul_description *desc)
|
||||
{
|
||||
VERBOSE("%s: get state\n", desc->node_name);
|
||||
|
||||
return stpmic1_is_regulator_enabled(desc->node_name);
|
||||
}
|
||||
|
||||
static int pmic_get_voltage(const struct regul_description *desc)
|
||||
{
|
||||
VERBOSE("%s: get volt\n", desc->node_name);
|
||||
|
||||
return stpmic1_regulator_voltage_get(desc->node_name);
|
||||
}
|
||||
|
||||
static int pmic_set_voltage(const struct regul_description *desc, uint16_t mv)
|
||||
{
|
||||
VERBOSE("%s: get volt\n", desc->node_name);
|
||||
|
||||
return stpmic1_regulator_voltage_set(desc->node_name, mv);
|
||||
}
|
||||
|
||||
static int pmic_list_voltages(const struct regul_description *desc,
|
||||
const uint16_t **levels, size_t *count)
|
||||
{
|
||||
VERBOSE("%s: list volt\n", desc->node_name);
|
||||
|
||||
return stpmic1_regulator_levels_mv(desc->node_name, levels, count);
|
||||
}
|
||||
|
||||
static int pmic_set_flag(const struct regul_description *desc, uint16_t flag)
|
||||
{
|
||||
VERBOSE("%s: set_flag 0x%x\n", desc->node_name, flag);
|
||||
|
||||
switch (flag) {
|
||||
case REGUL_OCP:
|
||||
return stpmic1_regulator_icc_set(desc->node_name);
|
||||
|
||||
case REGUL_ACTIVE_DISCHARGE:
|
||||
return stpmic1_active_discharge_mode_set(desc->node_name);
|
||||
|
||||
case REGUL_PULL_DOWN:
|
||||
return stpmic1_regulator_pull_down_set(desc->node_name);
|
||||
|
||||
case REGUL_MASK_RESET:
|
||||
return stpmic1_regulator_mask_reset_set(desc->node_name);
|
||||
|
||||
case REGUL_SINK_SOURCE:
|
||||
return stpmic1_regulator_sink_mode_set(desc->node_name);
|
||||
|
||||
case REGUL_ENABLE_BYPASS:
|
||||
return stpmic1_regulator_bypass_mode_set(desc->node_name);
|
||||
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
||||
static const struct regul_ops pmic_ops = {
|
||||
.set_state = pmic_set_state,
|
||||
.get_state = pmic_get_state,
|
||||
.set_voltage = pmic_set_voltage,
|
||||
.get_voltage = pmic_get_voltage,
|
||||
.list_voltages = pmic_list_voltages,
|
||||
.set_flag = pmic_set_flag,
|
||||
};
|
||||
|
||||
#define DEFINE_REGU(name) { \
|
||||
.node_name = name, \
|
||||
.ops = &pmic_ops, \
|
||||
.driver_data = NULL, \
|
||||
.enable_ramp_delay = 1000, \
|
||||
}
|
||||
|
||||
static const struct regul_description pmic_regs[] = {
|
||||
[STPMIC1_BUCK1] = DEFINE_REGU("buck1"),
|
||||
[STPMIC1_BUCK2] = DEFINE_REGU("buck2"),
|
||||
[STPMIC1_BUCK3] = DEFINE_REGU("buck3"),
|
||||
[STPMIC1_BUCK4] = DEFINE_REGU("buck4"),
|
||||
[STPMIC1_LDO1] = DEFINE_REGU("ldo1"),
|
||||
[STPMIC1_LDO2] = DEFINE_REGU("ldo2"),
|
||||
[STPMIC1_LDO3] = DEFINE_REGU("ldo3"),
|
||||
[STPMIC1_LDO4] = DEFINE_REGU("ldo4"),
|
||||
[STPMIC1_LDO5] = DEFINE_REGU("ldo5"),
|
||||
[STPMIC1_LDO6] = DEFINE_REGU("ldo6"),
|
||||
[STPMIC1_VREF_DDR] = DEFINE_REGU("vref_ddr"),
|
||||
[STPMIC1_BOOST] = DEFINE_REGU("boost"),
|
||||
[STPMIC1_VBUS_OTG] = DEFINE_REGU("pwr_sw1"),
|
||||
[STPMIC1_SW_OUT] = DEFINE_REGU("pwr_sw2"),
|
||||
};
|
||||
|
||||
#define NB_REG ARRAY_SIZE(pmic_regs)
|
||||
|
||||
static int register_pmic(void)
|
||||
{
|
||||
void *fdt;
|
||||
int pmic_node, regulators_node, subnode;
|
||||
|
||||
VERBOSE("Register pmic\n");
|
||||
|
||||
if (fdt_get_address(&fdt) == 0) {
|
||||
return -FDT_ERR_NOTFOUND;
|
||||
}
|
||||
|
||||
pmic_node = dt_get_pmic_node(fdt);
|
||||
if (pmic_node < 0) {
|
||||
return pmic_node;
|
||||
}
|
||||
|
||||
regulators_node = fdt_subnode_offset(fdt, pmic_node, "regulators");
|
||||
if (regulators_node < 0) {
|
||||
return -ENOENT;
|
||||
}
|
||||
|
||||
fdt_for_each_subnode(subnode, fdt, regulators_node) {
|
||||
const char *reg_name = fdt_get_name(fdt, subnode, NULL);
|
||||
const struct regul_description *desc;
|
||||
unsigned int i;
|
||||
int ret;
|
||||
|
||||
for (i = 0; i < NB_REG; i++) {
|
||||
desc = &pmic_regs[i];
|
||||
if (strcmp(desc->node_name, reg_name) == 0) {
|
||||
break;
|
||||
}
|
||||
}
|
||||
assert(i < NB_REG);
|
||||
|
||||
ret = regulator_register(desc, subnode);
|
||||
if (ret != 0) {
|
||||
WARN("%s:%d failed to register %s\n", __func__,
|
||||
__LINE__, reg_name);
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
Reference in New Issue
Block a user