GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)

source/trusted-firmware/trusted-firmware-a-2.8/include/drivers/nxp/dcfg/dcfg.h

@@ -0,0 +1,103 @@
+/*
+ * Copyright 2018-2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef DCFG_H
+#define DCFG_H
+
+#include <endian.h>
+
+#if defined(CONFIG_CHASSIS_2)
+#include <dcfg_lsch2.h>
+#elif defined(CONFIG_CHASSIS_3_2) || defined(CONFIG_CHASSIS_3)
+#include <dcfg_lsch3.h>
+#endif
+
+#ifdef NXP_GUR_BE
+#define gur_in32(a)		bswap32(mmio_read_32((uintptr_t)(a)))
+#define gur_out32(a, v)		mmio_write_32((uintptr_t)(a), bswap32(v))
+#elif defined(NXP_GUR_LE)
+#define gur_in32(a)		mmio_read_32((uintptr_t)(a))
+#define gur_out32(a, v)		mmio_write_32((uintptr_t)(a), v)
+#else
+#error Please define CCSR GUR register endianness
+#endif
+
+typedef struct {
+	union {
+		uint32_t val;
+		struct {
+			uint32_t min_ver:4;
+			uint32_t maj_ver:4;
+#if defined(CONFIG_CHASSIS_3) || defined(CONFIG_CHASSIS_3_2)
+			uint32_t personality:6;
+			uint32_t rsv1:2;
+#elif defined(CONFIG_CHASSIS_2)
+			uint32_t personality:8;
+
+#endif
+#if defined(CONFIG_CHASSIS_3) || defined(CONFIG_CHASSIS_3_2)
+			uint32_t dev_id:6;
+			uint32_t rsv2:2;
+			uint32_t family:4;
+#elif defined(CONFIG_CHASSIS_2)
+			uint32_t dev_id:12;
+#endif
+			uint32_t mfr_id;
+		} __packed bf;
+		struct {
+			uint32_t maj_min:8;
+			uint32_t version; /* SoC version without major and minor info */
+		} __packed bf_ver;
+	} __packed svr_reg;
+	bool sec_enabled;
+	bool is_populated;
+} soc_info_t;
+
+typedef struct {
+	bool is_populated;
+	uint8_t ocram_present;
+	uint8_t ddrc1_present;
+#if defined(CONFIG_CHASSIS_3) || defined(CONFIG_CHASSIS_3_2)
+	uint8_t ddrc2_present;
+#endif
+} devdisr5_info_t;
+
+typedef struct {
+	uint32_t porsr1;
+	uintptr_t g_nxp_dcfg_addr;
+	unsigned long nxp_sysclk_freq;
+	unsigned long nxp_ddrclk_freq;
+	unsigned int nxp_plat_clk_divider;
+} dcfg_init_info_t;
+
+
+struct sysinfo {
+	unsigned long freq_platform;
+	unsigned long freq_ddr_pll0;
+	unsigned long freq_ddr_pll1;
+};
+
+int get_clocks(struct sysinfo *sys);
+
+/* Read the PORSR1 register */
+uint32_t read_reg_porsr1(void);
+
+/*******************************************************************************
+ * Returns true if secur eboot is enabled on board
+ * mode = 0  (development mode - sb_en = 1)
+ * mode = 1 (production mode - ITS = 1)
+ ******************************************************************************/
+bool check_boot_mode_secure(uint32_t *mode);
+
+const soc_info_t *get_soc_info();
+const devdisr5_info_t *get_devdisr5_info();
+
+void dcfg_init(dcfg_init_info_t *dcfg_init_data);
+bool is_sec_enabled(void);
+
+void error_handler(int error_code);
+#endif /*	DCFG_H	*/