GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)

source/trusted-firmware/trusted-firmware-a-2.8/plat/allwinner/sun50i_h6/sunxi_power.c

@@ -0,0 +1,119 @@
+/*
+ * Copyright (c) 2017-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2018, Icenowy Zheng <icenowy@aosc.io>
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <errno.h>
+
+#include <common/debug.h>
+#include <drivers/allwinner/axp.h>
+#include <drivers/allwinner/sunxi_rsb.h>
+#include <lib/mmio.h>
+
+#include <sunxi_cpucfg.h>
+#include <sunxi_def.h>
+#include <sunxi_mmap.h>
+#include <sunxi_private.h>
+
+#define AXP805_HW_ADDR	0x745
+#define AXP805_RT_ADDR	0x3a
+
+static enum pmic_type {
+	UNKNOWN,
+	AXP805,
+} pmic;
+
+int axp_read(uint8_t reg)
+{
+	return rsb_read(AXP805_RT_ADDR, reg);
+}
+
+int axp_write(uint8_t reg, uint8_t val)
+{
+	return rsb_write(AXP805_RT_ADDR, reg, val);
+}
+
+static int rsb_init(void)
+{
+	int ret;
+
+	ret = rsb_init_controller();
+	if (ret)
+		return ret;
+
+	/* Switch to the recommended 3 MHz bus clock. */
+	ret = rsb_set_bus_speed(SUNXI_OSC24M_CLK_IN_HZ, 3000000);
+	if (ret)
+		return ret;
+
+	/* Initiate an I2C transaction to switch the PMIC to RSB mode. */
+	ret = rsb_set_device_mode(AXP20X_MODE_RSB << 16 | AXP20X_MODE_REG << 8);
+	if (ret)
+		return ret;
+
+	/* Associate the 8-bit runtime address with the 12-bit bus address. */
+	ret = rsb_assign_runtime_address(AXP805_HW_ADDR, AXP805_RT_ADDR);
+	if (ret)
+		return ret;
+
+	return axp_check_id();
+}
+
+int sunxi_pmic_setup(uint16_t socid, const void *fdt)
+{
+	int ret;
+
+	INFO("PMIC: Probing AXP805 on RSB\n");
+
+	ret = sunxi_init_platform_r_twi(socid, true);
+	if (ret)
+		return ret;
+
+	ret = rsb_init();
+	if (ret)
+		return ret;
+
+	/* Switch the AXP805 to master/single-PMIC mode. */
+	ret = axp_write(0xff, 0x0);
+	if (ret)
+		return ret;
+
+	pmic = AXP805;
+	axp_setup_regulators(fdt);
+
+	/* Switch the PMIC back to I2C mode. */
+	ret = axp_write(AXP20X_MODE_REG, AXP20X_MODE_I2C);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+void sunxi_power_down(void)
+{
+	switch (pmic) {
+	case AXP805:
+		/* (Re-)init RSB in case the rich OS has disabled it. */
+		sunxi_init_platform_r_twi(SUNXI_SOC_H6, true);
+		rsb_init();
+		axp_power_off();
+		break;
+	default:
+		break;
+	}
+}
+
+void sunxi_cpu_power_off_self(void)
+{
+	u_register_t mpidr = read_mpidr();
+	unsigned int core  = MPIDR_AFFLVL0_VAL(mpidr);
+
+	/* Enable the CPUIDLE hardware (only really needs to be done once). */
+	mmio_write_32(SUNXI_CPUIDLE_EN_REG, 0x16aa0000);
+	mmio_write_32(SUNXI_CPUIDLE_EN_REG, 0xaa160001);
+
+	/* Trigger power off for this core. */
+	mmio_write_32(SUNXI_CORE_CLOSE_REG, BIT_32(core));
+}