GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)

source/trusted-firmware/trusted-firmware-a-2.8/plat/arm/board/rdn1edge/rdn1edge_plat.c

@@ -0,0 +1,97 @@
+/*
+ * Copyright (c) 2018-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common/debug.h>
+#include <drivers/arm/gic600_multichip.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+#include <sgi_soc_platform_def.h>
+#include <sgi_plat.h>
+
+#if defined(IMAGE_BL31)
+static const mmap_region_t rdn1edge_dynamic_mmap[] = {
+	ARM_MAP_SHARED_RAM_REMOTE_CHIP(1),
+	CSS_SGI_MAP_DEVICE_REMOTE_CHIP(1),
+	SOC_CSS_MAP_DEVICE_REMOTE_CHIP(1)
+};
+
+static struct gic600_multichip_data rdn1e1_multichip_data __init = {
+	.rt_owner_base = PLAT_ARM_GICD_BASE,
+	.rt_owner = 0,
+	.chip_count = CSS_SGI_CHIP_COUNT,
+	.chip_addrs = {
+		PLAT_ARM_GICD_BASE >> 16,
+		(PLAT_ARM_GICD_BASE + CSS_SGI_REMOTE_CHIP_MEM_OFFSET(1)) >> 16
+	},
+	.spi_ids = {
+		{PLAT_ARM_GICD_BASE, 32, 255},
+		{0, 0, 0}
+	}
+};
+
+static uintptr_t rdn1e1_multichip_gicr_frames[] = {
+	PLAT_ARM_GICR_BASE,				/* Chip 0's GICR Base */
+	PLAT_ARM_GICR_BASE +
+		CSS_SGI_REMOTE_CHIP_MEM_OFFSET(1),	/* Chip 1's GICR BASE */
+	UL(0)						/* Zero Termination */
+};
+#endif /* IMAGE_BL31 */
+
+unsigned int plat_arm_sgi_get_platform_id(void)
+{
+	return mmio_read_32(SID_REG_BASE + SID_SYSTEM_ID_OFFSET)
+				& SID_SYSTEM_ID_PART_NUM_MASK;
+}
+
+unsigned int plat_arm_sgi_get_config_id(void)
+{
+	return mmio_read_32(SID_REG_BASE + SID_SYSTEM_CFG_OFFSET);
+}
+
+unsigned int plat_arm_sgi_get_multi_chip_mode(void)
+{
+	return (mmio_read_32(SID_REG_BASE + SID_NODE_ID_OFFSET) &
+			SID_MULTI_CHIP_MODE_MASK) >> SID_MULTI_CHIP_MODE_SHIFT;
+}
+
+/*
+ * IMAGE_BL31 macro is added to build bl31_platform_setup function only for BL31
+ * because PLAT_XLAT_TABLES_DYNAMIC macro is set to build only for BL31 and not
+ * for other stages.
+ */
+#if defined(IMAGE_BL31)
+void bl31_platform_setup(void)
+{
+	int i, ret;
+
+	if (plat_arm_sgi_get_multi_chip_mode() == 0 && CSS_SGI_CHIP_COUNT > 1) {
+		ERROR("Chip Count is set to %d but multi-chip mode not enabled\n",
+				CSS_SGI_CHIP_COUNT);
+		panic();
+	} else if (plat_arm_sgi_get_multi_chip_mode() == 1 &&
+			CSS_SGI_CHIP_COUNT > 1) {
+		INFO("Enabling support for multi-chip in RD-N1-Edge\n");
+
+		for (i = 0; i < ARRAY_SIZE(rdn1edge_dynamic_mmap); i++) {
+			ret = mmap_add_dynamic_region(
+					rdn1edge_dynamic_mmap[i].base_pa,
+					rdn1edge_dynamic_mmap[i].base_va,
+					rdn1edge_dynamic_mmap[i].size,
+					rdn1edge_dynamic_mmap[i].attr
+					);
+			if (ret != 0) {
+				ERROR("Failed to add dynamic mmap entry\n");
+				panic();
+			}
+		}
+
+		plat_arm_override_gicr_frames(rdn1e1_multichip_gicr_frames);
+		gic600_multichip_init(&rdn1e1_multichip_data);
+	}
+
+	sgi_bl31_common_platform_setup();
+}
+#endif /* IMAGE_BL31 */