GK SDK 源码库: XMIPCLinuxV100R005C00SPC030 (kernel/tools/open_source excluded)

source/trusted-firmware/trusted-firmware-a-2.8/plat/qemu/qemu_sbsa/include/platform_def.h

@@ -0,0 +1,378 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ *
+ * Copyright (c) 2019-2020, Linaro Limited and Contributors.
+ * All rights reserved.
+ */
+
+#ifndef PLATFORM_DEF_H
+#define PLATFORM_DEF_H
+
+#include <arch.h>
+#include <plat/common/common_def.h>
+#include <tbbr_img_def.h>
+
+/* Special value used to verify platform parameters from BL2 to BL3-1 */
+#define QEMU_BL31_PLAT_PARAM_VAL	0x0f1e2d3c4b5a6978ULL
+
+#define PLATFORM_STACK_SIZE		0x1000
+
+#define PLATFORM_MAX_CPUS_PER_CLUSTER	U(8)
+/*
+ * Define the number of cores per cluster used in calculating core position.
+ * The cluster number is shifted by this value and added to the core ID,
+ * so its value represents log2(cores/cluster).
+ * Default is 2**(3) = 8 cores per cluster.
+ */
+#define PLATFORM_CPU_PER_CLUSTER_SHIFT	U(3)
+#define PLATFORM_CLUSTER_COUNT		U(64)
+#define PLATFORM_CORE_COUNT		(PLATFORM_CLUSTER_COUNT * \
+					PLATFORM_MAX_CPUS_PER_CLUSTER)
+#define QEMU_PRIMARY_CPU		U(0)
+
+#define PLAT_NUM_PWR_DOMAINS		(PLATFORM_CLUSTER_COUNT + \
+					PLATFORM_CORE_COUNT)
+#define PLAT_MAX_PWR_LVL		MPIDR_AFFLVL1
+
+#define PLAT_MAX_RET_STATE		1
+#define PLAT_MAX_OFF_STATE		2
+
+/* Local power state for power domains in Run state. */
+#define PLAT_LOCAL_STATE_RUN		0
+/* Local power state for retention. Valid only for CPU power domains */
+#define PLAT_LOCAL_STATE_RET		1
+/*
+ * Local power state for OFF/power-down. Valid for CPU and cluster power
+ * domains.
+ */
+#define PLAT_LOCAL_STATE_OFF		2
+
+/*
+ * Macros used to parse state information from State-ID if it is using the
+ * recommended encoding for State-ID.
+ */
+#define PLAT_LOCAL_PSTATE_WIDTH		4
+#define PLAT_LOCAL_PSTATE_MASK		((1 << PLAT_LOCAL_PSTATE_WIDTH) - 1)
+
+/*
+ * Some data must be aligned on the biggest cache line size in the platform.
+ * This is known only to the platform as it might have a combination of
+ * integrated and external caches.
+ */
+#define CACHE_WRITEBACK_SHIFT		6
+#define CACHE_WRITEBACK_GRANULE		(1 << CACHE_WRITEBACK_SHIFT)
+
+/*
+ * Partition memory into secure ROM, non-secure DRAM, secure "SRAM",
+ * and secure DRAM.
+ */
+#define SEC_ROM_BASE			0x00000000
+#define SEC_ROM_SIZE			0x00020000
+
+#define NS_DRAM0_BASE			0x10000000000ULL
+#define NS_DRAM0_SIZE			0x00020000000
+
+#define SEC_SRAM_BASE			0x20000000
+#define SEC_SRAM_SIZE			0x20000000
+
+/*
+ * RAD just placeholders, need to be chosen after finalizing mem map
+ */
+#define SEC_DRAM_BASE			0x1000
+#define SEC_DRAM_SIZE			0x1000
+
+/* Load pageable part of OP-TEE 2MB above secure DRAM base */
+#define QEMU_OPTEE_PAGEABLE_LOAD_BASE	(SEC_DRAM_BASE + 0x00200000)
+#define QEMU_OPTEE_PAGEABLE_LOAD_SIZE	0x00400000
+
+/*
+ * ARM-TF lives in SRAM, partition it here
+ */
+
+#define SHARED_RAM_BASE			SEC_SRAM_BASE
+#define SHARED_RAM_SIZE			0x00002000
+
+#define PLAT_QEMU_TRUSTED_MAILBOX_BASE	SHARED_RAM_BASE
+#define PLAT_QEMU_TRUSTED_MAILBOX_SIZE	(8 + PLAT_QEMU_HOLD_SIZE)
+#define PLAT_QEMU_HOLD_BASE		(PLAT_QEMU_TRUSTED_MAILBOX_BASE + 8)
+#define PLAT_QEMU_HOLD_SIZE		(PLATFORM_CORE_COUNT * \
+					 PLAT_QEMU_HOLD_ENTRY_SIZE)
+#define PLAT_QEMU_HOLD_ENTRY_SHIFT	3
+#define PLAT_QEMU_HOLD_ENTRY_SIZE	(1 << PLAT_QEMU_HOLD_ENTRY_SHIFT)
+#define PLAT_QEMU_HOLD_STATE_WAIT	0
+#define PLAT_QEMU_HOLD_STATE_GO		1
+
+#define BL_RAM_BASE			(SHARED_RAM_BASE + SHARED_RAM_SIZE)
+#define BL_RAM_SIZE			(SEC_SRAM_SIZE - SHARED_RAM_SIZE)
+
+/*
+ * BL1 specific defines.
+ *
+ * BL1 RW data is relocated from ROM to RAM at runtime so we need 2 sets of
+ * addresses.
+ * Put BL1 RW at the top of the Secure SRAM. BL1_RW_BASE is calculated using
+ * the current BL1 RW debug size plus a little space for growth.
+ */
+#define BL1_SIZE			0x12000
+#define BL1_RO_BASE			SEC_ROM_BASE
+#define BL1_RO_LIMIT			(SEC_ROM_BASE + SEC_ROM_SIZE)
+#define BL1_RW_BASE			(BL1_RW_LIMIT - BL1_SIZE)
+#define BL1_RW_LIMIT			(BL_RAM_BASE + BL_RAM_SIZE)
+
+/*
+ * BL2 specific defines.
+ *
+ * Put BL2 just below BL3-1. BL2_BASE is calculated using the current BL2 debug
+ * size plus a little space for growth.
+ */
+#define BL2_SIZE			0x1D000
+#define BL2_BASE			(BL31_BASE - BL2_SIZE)
+#define BL2_LIMIT			BL31_BASE
+
+/*
+ * BL3-1 specific defines.
+ *
+ * Put BL3-1 at the top of the Trusted SRAM. BL31_BASE is calculated using the
+ * current BL3-1 debug size plus a little space for growth.
+ */
+#define BL31_SIZE			0x300000
+#define BL31_BASE			(BL31_LIMIT - BL31_SIZE)
+#define BL31_LIMIT			(BL1_RW_BASE)
+#define BL31_PROGBITS_LIMIT		BL1_RW_BASE
+
+
+/*
+ * BL3-2 specific defines.
+ *
+ * BL3-2 can execute from Secure SRAM, or Secure DRAM.
+ */
+#define BL32_SRAM_BASE			BL_RAM_BASE
+#define BL32_SRAM_LIMIT			BL2_BASE
+
+#define BL32_MEM_BASE			BL_RAM_BASE
+#define BL32_MEM_SIZE			(BL_RAM_SIZE - BL1_SIZE - \
+					BL2_SIZE - BL31_SIZE)
+#define BL32_BASE			BL32_SRAM_BASE
+#define BL32_LIMIT			BL32_SRAM_LIMIT
+
+#define NS_IMAGE_OFFSET			(NS_DRAM0_BASE + 0x20000000)
+#define NS_IMAGE_MAX_SIZE		(NS_DRAM0_SIZE - 0x20000000)
+
+#define PLAT_PHY_ADDR_SPACE_SIZE	(1ull << 42)
+#define PLAT_VIRT_ADDR_SPACE_SIZE	(1ull << 42)
+#if SPM_MM
+#define MAX_MMAP_REGIONS		12
+#define MAX_XLAT_TABLES			12
+#else
+#define MAX_MMAP_REGIONS		11
+#define MAX_XLAT_TABLES			11
+#endif
+#define MAX_IO_DEVICES			3
+#define MAX_IO_HANDLES			4
+
+#if SPM_MM && defined(IMAGE_BL31)
+# define PLAT_SP_IMAGE_MMAP_REGIONS	30
+# define PLAT_SP_IMAGE_MAX_XLAT_TABLES	50
+#endif
+
+/*
+ * PL011 related constants
+ */
+#define UART0_BASE			0x60000000
+#define UART1_BASE			0x60030000
+#define UART0_CLK_IN_HZ			1
+#define UART1_CLK_IN_HZ			1
+
+/* Secure UART */
+#define UART2_BASE			0x60040000
+#define UART2_CLK_IN_HZ			1
+
+#define PLAT_QEMU_BOOT_UART_BASE	UART0_BASE
+#define PLAT_QEMU_BOOT_UART_CLK_IN_HZ	UART0_CLK_IN_HZ
+
+#define PLAT_QEMU_CRASH_UART_BASE	UART1_BASE
+#define PLAT_QEMU_CRASH_UART_CLK_IN_HZ	UART1_CLK_IN_HZ
+
+#define PLAT_QEMU_CONSOLE_BAUDRATE	115200
+
+#define QEMU_FLASH0_BASE		0x00000000
+#define QEMU_FLASH0_SIZE		0x10000000
+#define QEMU_FLASH1_BASE		0x10000000
+#define QEMU_FLASH1_SIZE		0x10000000
+
+#define PLAT_QEMU_FIP_BASE		0x00008000
+#define PLAT_QEMU_FIP_MAX_SIZE		0x00400000
+
+/* This is map from GIC_DIST up to last CPU (255) GIC_REDISTR */
+#define DEVICE0_BASE			0x40000000
+#define DEVICE0_SIZE			0x04080000
+/* This is map from NORMAL_UART up to SECURE_UART_MM */
+#define DEVICE1_BASE			0x60000000
+#define DEVICE1_SIZE			0x10041000
+/* This is a map for SECURE_EC */
+#define DEVICE2_BASE			0x50000000
+#define DEVICE2_SIZE			0x00001000
+
+/*
+ * GIC related constants
+ * We use GICv3 where CPU Interface registers are not memory mapped
+ */
+#define GICD_BASE			0x40060000
+#define GICR_BASE			0x40080000
+#define GICC_BASE			0x0
+
+#define QEMU_IRQ_SEC_SGI_0		8
+#define QEMU_IRQ_SEC_SGI_1		9
+#define QEMU_IRQ_SEC_SGI_2		10
+#define QEMU_IRQ_SEC_SGI_3		11
+#define QEMU_IRQ_SEC_SGI_4		12
+#define QEMU_IRQ_SEC_SGI_5		13
+#define QEMU_IRQ_SEC_SGI_6		14
+#define QEMU_IRQ_SEC_SGI_7		15
+
+/******************************************************************************
+ * On a GICv2 system, the Group 1 secure interrupts are treated as Group 0
+ * interrupts.
+ *****************************************************************************/
+#define PLATFORM_G1S_PROPS(grp)						\
+	INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_0, GIC_HIGHEST_SEC_PRIORITY,	\
+					   grp, GIC_INTR_CFG_EDGE),	\
+	INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_1, GIC_HIGHEST_SEC_PRIORITY,	\
+					   grp, GIC_INTR_CFG_EDGE),	\
+	INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_2, GIC_HIGHEST_SEC_PRIORITY,	\
+					   grp, GIC_INTR_CFG_EDGE),	\
+	INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_3, GIC_HIGHEST_SEC_PRIORITY,	\
+					   grp, GIC_INTR_CFG_EDGE),	\
+	INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_4, GIC_HIGHEST_SEC_PRIORITY,	\
+					   grp, GIC_INTR_CFG_EDGE),	\
+	INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_5, GIC_HIGHEST_SEC_PRIORITY,	\
+					   grp, GIC_INTR_CFG_EDGE),	\
+	INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_6, GIC_HIGHEST_SEC_PRIORITY,	\
+					   grp, GIC_INTR_CFG_EDGE),	\
+	INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_7, GIC_HIGHEST_SEC_PRIORITY,	\
+					   grp, GIC_INTR_CFG_EDGE)
+
+#define PLATFORM_G0_PROPS(grp)
+
+/*
+ * DT related constants
+ */
+#define PLAT_QEMU_DT_BASE		NS_DRAM0_BASE
+#define PLAT_QEMU_DT_MAX_SIZE		0x100000
+
+/*
+ * System counter
+ */
+#define SYS_COUNTER_FREQ_IN_TICKS	((1000 * 1000 * 1000) / 16)
+
+#if SPM_MM
+#define PLAT_QEMU_SP_IMAGE_BASE		BL_RAM_BASE
+#define PLAT_QEMU_SP_IMAGE_SIZE		ULL(0x300000)
+
+#ifdef IMAGE_BL2
+/* In BL2 all memory allocated to the SPM Payload image is marked as RW. */
+# define QEMU_SP_IMAGE_MMAP		MAP_REGION_FLAT( \
+						PLAT_QEMU_SP_IMAGE_BASE, \
+						PLAT_QEMU_SP_IMAGE_SIZE, \
+						MT_MEMORY | MT_RW | \
+						MT_SECURE)
+#elif IMAGE_BL31
+/* All SPM Payload memory is marked as code in S-EL0 */
+# define QEMU_SP_IMAGE_MMAP		MAP_REGION2(PLAT_QEMU_SP_IMAGE_BASE, \
+						PLAT_QEMU_SP_IMAGE_BASE, \
+						PLAT_QEMU_SP_IMAGE_SIZE, \
+						MT_CODE | MT_SECURE | \
+						MT_USER,		\
+						PAGE_SIZE)
+#endif
+
+/*
+ * EL3 -> S-EL0 secure shared memory
+ */
+#define PLAT_SPM_BUF_PCPU_SIZE		ULL(0x10000)
+#define PLAT_SPM_BUF_SIZE		(PLATFORM_CORE_COUNT * \
+					PLAT_SPM_BUF_PCPU_SIZE)
+#define PLAT_SPM_BUF_BASE		(BL32_LIMIT - PLAT_SPM_BUF_SIZE)
+
+#define QEMU_SPM_BUF_EL3_MMAP		MAP_REGION_FLAT(PLAT_SPM_BUF_BASE, \
+						PLAT_SPM_BUF_SIZE, \
+						MT_RW_DATA | MT_SECURE)
+
+#define QEMU_SPM_BUF_EL0_MMAP		MAP_REGION2(PLAT_SPM_BUF_BASE,	\
+						PLAT_SPM_BUF_BASE,	\
+						PLAT_SPM_BUF_SIZE,	\
+						MT_RO_DATA | MT_SECURE | \
+						MT_USER,		\
+						PAGE_SIZE)
+
+/*
+ * Shared memory between Normal world and S-EL0 for
+ * passing data during service requests. It will be marked as RW and NS.
+ * This buffer is allocated at the top of NS_DRAM, the base address is
+ * overridden in SPM initialization.
+ */
+#define PLAT_QEMU_SP_IMAGE_NS_BUF_BASE	(PLAT_QEMU_DT_BASE +		\
+						PLAT_QEMU_DT_MAX_SIZE)
+#define PLAT_QEMU_SP_IMAGE_NS_BUF_SIZE	ULL(0x200000)
+
+#define QEMU_SP_IMAGE_NS_BUF_MMAP	MAP_REGION2( \
+					PLAT_QEMU_SP_IMAGE_NS_BUF_BASE, \
+					PLAT_QEMU_SP_IMAGE_NS_BUF_BASE, \
+					PLAT_QEMU_SP_IMAGE_NS_BUF_SIZE, \
+					MT_RW_DATA | MT_NS | \
+					MT_USER, \
+					PAGE_SIZE)
+
+#define PLAT_SP_IMAGE_NS_BUF_BASE	PLAT_QEMU_SP_IMAGE_NS_BUF_BASE
+#define PLAT_SP_IMAGE_NS_BUF_SIZE	PLAT_QEMU_SP_IMAGE_NS_BUF_SIZE
+
+#define PLAT_QEMU_SP_IMAGE_HEAP_BASE	(PLAT_QEMU_SP_IMAGE_BASE + \
+					PLAT_QEMU_SP_IMAGE_SIZE)
+#define PLAT_QEMU_SP_IMAGE_HEAP_SIZE	ULL(0x800000)
+
+#define PLAT_SP_IMAGE_STACK_BASE	(PLAT_QEMU_SP_IMAGE_HEAP_BASE + \
+						PLAT_QEMU_SP_IMAGE_HEAP_SIZE)
+#define PLAT_SP_IMAGE_STACK_PCPU_SIZE	ULL(0x10000)
+#define QEMU_SP_IMAGE_STACK_TOTAL_SIZE	(PLATFORM_CORE_COUNT * \
+						PLAT_SP_IMAGE_STACK_PCPU_SIZE)
+
+#define QEMU_SP_IMAGE_RW_MMAP		MAP_REGION2( \
+					PLAT_QEMU_SP_IMAGE_HEAP_BASE, \
+					PLAT_QEMU_SP_IMAGE_HEAP_BASE, \
+					(QEMU_SP_IMAGE_STACK_TOTAL_SIZE + \
+					PLAT_QEMU_SP_IMAGE_HEAP_SIZE), \
+					MT_RW_DATA | MT_SECURE | \
+					MT_USER, \
+					PAGE_SIZE)
+
+/*
+ * Secure variable storage is located at Secure Flash.
+ */
+#if SPM_MM
+#define QEMU_SECURE_VARSTORE_BASE 0x01000000
+#define QEMU_SECURE_VARSTORE_SIZE 0x00100000
+#define MAP_SECURE_VARSTORE		MAP_REGION_FLAT( \
+					QEMU_SECURE_VARSTORE_BASE, \
+					QEMU_SECURE_VARSTORE_SIZE, \
+					MT_DEVICE | MT_RW | \
+					MT_SECURE | MT_USER)
+#endif
+
+/* Total number of memory regions with distinct properties */
+#define PLAT_QEMU_SP_IMAGE_NUM_MEM_REGIONS	6
+
+/*
+ * Name of the section to put the translation tables used by the S-EL1/S-EL0
+ * context of a Secure Partition.
+ */
+#define PLAT_SP_IMAGE_XLAT_SECTION_NAME		"qemu_sp_xlat_table"
+#define PLAT_SP_IMAGE_BASE_XLAT_SECTION_NAME	"qemu_sp_xlat_table"
+
+/* Cookies passed to the Secure Partition at boot. Not used by QEMU platforms.*/
+#define PLAT_SPM_COOKIE_0		ULL(0)
+#define PLAT_SPM_COOKIE_1		ULL(0)
+#endif
+
+#define QEMU_PRI_BITS		2
+#define PLAT_SP_PRI		0x20
+
+#endif /* PLATFORM_DEF_H */

source/trusted-firmware/trusted-firmware-a-2.8/plat/qemu/qemu_sbsa/platform.mk

@@ -0,0 +1,127 @@
+#
+# Copyright (c) 2019-2021, Linaro Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+include common/fdt_wrappers.mk
+
+CRASH_REPORTING	:=	1
+
+include lib/libfdt/libfdt.mk
+
+ifeq (${SPM_MM},1)
+NEED_BL32		:=	yes
+EL3_EXCEPTION_HANDLING	:=	1
+GICV2_G0_FOR_EL3	:=	1
+endif
+
+# Enable new version of image loading on QEMU platforms
+LOAD_IMAGE_V2		:=	1
+
+ifeq ($(NEED_BL32),yes)
+$(eval $(call add_define,QEMU_LOAD_BL32))
+endif
+
+PLAT_QEMU_PATH		:=	plat/qemu/qemu_sbsa
+PLAT_QEMU_COMMON_PATH	:=	plat/qemu/common
+PLAT_INCLUDES		:=	-Iinclude/plat/arm/common/			\
+				-I${PLAT_QEMU_COMMON_PATH}/include		\
+				-I${PLAT_QEMU_PATH}/include			\
+				-Iinclude/common/tbbr
+
+PLAT_INCLUDES		+=	-Iinclude/plat/arm/common/${ARCH}
+
+PLAT_BL_COMMON_SOURCES	:=	${PLAT_QEMU_COMMON_PATH}/qemu_common.c		\
+				${PLAT_QEMU_COMMON_PATH}/qemu_console.c		\
+				drivers/arm/pl011/${ARCH}/pl011_console.S
+
+include lib/xlat_tables_v2/xlat_tables.mk
+PLAT_BL_COMMON_SOURCES	+=	${XLAT_TABLES_LIB_SRCS}
+
+BL1_SOURCES		+=	drivers/io/io_semihosting.c			\
+				drivers/io/io_storage.c				\
+				drivers/io/io_fip.c				\
+				drivers/io/io_memmap.c				\
+				lib/semihosting/semihosting.c			\
+				lib/semihosting/${ARCH}/semihosting_call.S	\
+				${PLAT_QEMU_COMMON_PATH}/qemu_io_storage.c	\
+				${PLAT_QEMU_COMMON_PATH}/${ARCH}/plat_helpers.S	\
+				${PLAT_QEMU_COMMON_PATH}/qemu_bl1_setup.c
+
+BL1_SOURCES		+=	lib/cpus/aarch64/cortex_a57.S			\
+				lib/cpus/aarch64/cortex_a72.S			\
+				lib/cpus/aarch64/qemu_max.S			\
+
+BL2_SOURCES		+=	drivers/io/io_semihosting.c			\
+				drivers/io/io_storage.c				\
+				drivers/io/io_fip.c				\
+				drivers/io/io_memmap.c				\
+				lib/semihosting/semihosting.c			\
+				lib/semihosting/${ARCH}/semihosting_call.S	\
+				${PLAT_QEMU_COMMON_PATH}/qemu_io_storage.c	\
+				${PLAT_QEMU_COMMON_PATH}/${ARCH}/plat_helpers.S	\
+				${PLAT_QEMU_COMMON_PATH}/qemu_bl2_setup.c	\
+				common/fdt_fixup.c				\
+				$(LIBFDT_SRCS)
+ifeq (${LOAD_IMAGE_V2},1)
+BL2_SOURCES		+=	${PLAT_QEMU_COMMON_PATH}/qemu_bl2_mem_params_desc.c	\
+				${PLAT_QEMU_COMMON_PATH}/qemu_image_load.c		\
+				common/desc_image_load.c
+endif
+
+# Include GICv3 driver files
+include drivers/arm/gic/v3/gicv3.mk
+
+QEMU_GIC_SOURCES	:=	${GICV3_SOURCES}				\
+				plat/common/plat_gicv3.c			\
+				${PLAT_QEMU_COMMON_PATH}/qemu_gicv3.c
+
+BL31_SOURCES		+=	lib/cpus/aarch64/cortex_a57.S			\
+				lib/cpus/aarch64/cortex_a72.S			\
+				lib/cpus/aarch64/qemu_max.S			\
+				lib/semihosting/semihosting.c			\
+				lib/semihosting/${ARCH}/semihosting_call.S	\
+				plat/common/plat_psci_common.c			\
+				${PLAT_QEMU_PATH}/sbsa_pm.c			\
+				${PLAT_QEMU_PATH}/sbsa_topology.c		\
+				${PLAT_QEMU_COMMON_PATH}/aarch64/plat_helpers.S	\
+				${PLAT_QEMU_COMMON_PATH}/qemu_bl31_setup.c	\
+				common/fdt_fixup.c				\
+				${QEMU_GIC_SOURCES}
+
+BL31_SOURCES		+=	${FDT_WRAPPERS_SOURCES}
+
+ifeq (${SPM_MM},1)
+	BL31_SOURCES		+=	${PLAT_QEMU_COMMON_PATH}/qemu_spm.c
+endif
+
+SEPARATE_CODE_AND_RODATA	:= 1
+ENABLE_STACK_PROTECTOR		:= 0
+ifneq ($(ENABLE_STACK_PROTECTOR), 0)
+	PLAT_BL_COMMON_SOURCES	+=	${PLAT_QEMU_COMMON_PATH}/qemu_stack_protector.c
+endif
+
+MULTI_CONSOLE_API	:= 1
+
+# Disable the PSCI platform compatibility layer
+ENABLE_PLAT_COMPAT	:= 0
+
+# Use known base for UEFI if not given from command line
+# By default BL33 is at FLASH1 base
+PRELOADED_BL33_BASE	?= 0x10000000
+
+# Qemu SBSA plafrom only support SEC_SRAM
+BL32_RAM_LOCATION_ID	= SEC_SRAM_ID
+$(eval $(call add_define,BL32_RAM_LOCATION_ID))
+
+# Don't have the Linux kernel as a BL33 image by default
+ARM_LINUX_KERNEL_AS_BL33	:=	0
+$(eval $(call assert_boolean,ARM_LINUX_KERNEL_AS_BL33))
+$(eval $(call add_define,ARM_LINUX_KERNEL_AS_BL33))
+
+ARM_PRELOADED_DTB_BASE := PLAT_QEMU_DT_BASE
+$(eval $(call add_define,ARM_PRELOADED_DTB_BASE))
+
+# Do not enable SVE
+ENABLE_SVE_FOR_NS	:= 0

source/trusted-firmware/trusted-firmware-a-2.8/plat/qemu/qemu_sbsa/sbsa_pm.c

@@ -0,0 +1,237 @@
+/*
+ * Copyright (c) 2020, Nuvia Inc
+ * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+
+#include <arch_helpers.h>
+#include <assert.h>
+#include <lib/mmio.h>
+#include <lib/psci/psci.h>
+#include <plat/common/platform.h>
+
+#include <platform_def.h>
+#include "sbsa_private.h"
+
+#define ADP_STOPPED_APPLICATION_EXIT 0x20026
+
+/*
+ * Define offset and commands for the fake EC device
+ */
+#define SBSA_SECURE_EC_OFFSET 0x50000000
+
+#define SBSA_SECURE_EC_CMD_SHUTDOWN 0x01
+#define SBSA_SECURE_EC_CMD_REBOOT   0x02
+
+/*
+ * The secure entry point to be used on warm reset.
+ */
+static unsigned long secure_entrypoint;
+
+/* Make composite power state parameter till power level 0 */
+#if PSCI_EXTENDED_STATE_ID
+
+#define qemu_make_pwrstate_lvl0(lvl0_state, pwr_lvl, type) \
+		(((lvl0_state) << PSTATE_ID_SHIFT) | \
+		 ((type) << PSTATE_TYPE_SHIFT))
+#else
+#define qemu_make_pwrstate_lvl0(lvl0_state, pwr_lvl, type) \
+		(((lvl0_state) << PSTATE_ID_SHIFT) | \
+		 ((pwr_lvl) << PSTATE_PWR_LVL_SHIFT) | \
+		 ((type) << PSTATE_TYPE_SHIFT))
+#endif /* PSCI_EXTENDED_STATE_ID */
+
+
+#define qemu_make_pwrstate_lvl1(lvl1_state, lvl0_state, pwr_lvl, type) \
+		(((lvl1_state) << PLAT_LOCAL_PSTATE_WIDTH) | \
+		 qemu_make_pwrstate_lvl0(lvl0_state, pwr_lvl, type))
+
+
+
+/*
+ *  The table storing the valid idle power states. Ensure that the
+ *  array entries are populated in ascending order of state-id to
+ *  enable us to use binary search during power state validation.
+ *  The table must be terminated by a NULL entry.
+ */
+static const unsigned int qemu_pm_idle_states[] = {
+	/* State-id - 0x01 */
+	qemu_make_pwrstate_lvl1(PLAT_LOCAL_STATE_RUN, PLAT_LOCAL_STATE_RET,
+				MPIDR_AFFLVL0, PSTATE_TYPE_STANDBY),
+	/* State-id - 0x02 */
+	qemu_make_pwrstate_lvl1(PLAT_LOCAL_STATE_RUN, PLAT_LOCAL_STATE_OFF,
+				MPIDR_AFFLVL0, PSTATE_TYPE_POWERDOWN),
+	/* State-id - 0x22 */
+	qemu_make_pwrstate_lvl1(PLAT_LOCAL_STATE_OFF, PLAT_LOCAL_STATE_OFF,
+				MPIDR_AFFLVL1, PSTATE_TYPE_POWERDOWN),
+	0
+};
+
+/*******************************************************************************
+ * Platform handler called to check the validity of the power state
+ * parameter. The power state parameter has to be a composite power state.
+ ******************************************************************************/
+static int qemu_validate_power_state(unsigned int power_state,
+				psci_power_state_t *req_state)
+{
+	unsigned int state_id;
+	unsigned int i;
+
+	assert(req_state != NULL);
+
+	/*
+	 *  Currently we are using a linear search for finding the matching
+	 *  entry in the idle power state array. This can be made a binary
+	 *  search if the number of entries justifies the additional complexity.
+	 */
+	for (i = 0U; qemu_pm_idle_states[i] != 0U; i++) {
+		if (power_state == qemu_pm_idle_states[i]) {
+			break;
+		}
+	}
+
+	/* Return error if entry not found in the idle state array */
+	if (qemu_pm_idle_states[i] == 0U) {
+		return PSCI_E_INVALID_PARAMS;
+	}
+
+	i = 0U;
+	state_id = psci_get_pstate_id(power_state);
+
+	/* Parse the State ID and populate the state info parameter */
+	while (state_id != 0U) {
+		req_state->pwr_domain_state[i++] = state_id &
+						PLAT_LOCAL_PSTATE_MASK;
+		state_id >>= PLAT_LOCAL_PSTATE_WIDTH;
+	}
+
+	return PSCI_E_SUCCESS;
+}
+
+/*******************************************************************************
+ * Platform handler called when a CPU is about to enter standby.
+ ******************************************************************************/
+static void qemu_cpu_standby(plat_local_state_t cpu_state)
+{
+
+	assert(cpu_state == PLAT_LOCAL_STATE_RET);
+
+	/*
+	 * Enter standby state
+	 * dsb is good practice before using wfi to enter low power states
+	 */
+	dsb();
+	wfi();
+}
+
+/*******************************************************************************
+ * Platform handler called when a power domain is about to be turned on. The
+ * mpidr determines the CPU to be turned on.
+ ******************************************************************************/
+static int qemu_pwr_domain_on(u_register_t mpidr)
+{
+	int pos = plat_core_pos_by_mpidr(mpidr);
+	uint64_t *hold_base = (uint64_t *)PLAT_QEMU_HOLD_BASE;
+
+	if (pos < 0) {
+		return PSCI_E_INVALID_PARAMS;
+	}
+
+	hold_base[pos] = PLAT_QEMU_HOLD_STATE_GO;
+	dsb();
+	sev();
+
+	return PSCI_E_SUCCESS;
+}
+
+/*******************************************************************************
+ * Platform handler called when a power domain is about to be turned off. The
+ * target_state encodes the power state that each level should transition to.
+ ******************************************************************************/
+static void qemu_pwr_domain_off(const psci_power_state_t *target_state)
+{
+	qemu_pwr_gic_off();
+}
+
+void __dead2 plat_secondary_cold_boot_setup(void);
+
+static void __dead2
+qemu_pwr_domain_pwr_down_wfi(const psci_power_state_t *target_state)
+{
+	disable_mmu_el3();
+	plat_secondary_cold_boot_setup();
+}
+
+/*******************************************************************************
+ * Platform handler called when a power domain is about to be suspended. The
+ * target_state encodes the power state that each level should transition to.
+ ******************************************************************************/
+void qemu_pwr_domain_suspend(const psci_power_state_t *target_state)
+{
+	assert(false);
+}
+
+/*******************************************************************************
+ * Platform handler called when a power domain has just been powered on after
+ * being turned off earlier. The target_state encodes the low power state that
+ * each level has woken up from.
+ ******************************************************************************/
+void qemu_pwr_domain_on_finish(const psci_power_state_t *target_state)
+{
+	assert(target_state->pwr_domain_state[MPIDR_AFFLVL0] ==
+					PLAT_LOCAL_STATE_OFF);
+
+	qemu_pwr_gic_on_finish();
+}
+
+/*******************************************************************************
+ * Platform handler called when a power domain has just been powered on after
+ * having been suspended earlier. The target_state encodes the low power state
+ * that each level has woken up from.
+ ******************************************************************************/
+void qemu_pwr_domain_suspend_finish(const psci_power_state_t *target_state)
+{
+	assert(false);
+}
+
+/*******************************************************************************
+ * Platform handlers to shutdown/reboot the system
+ ******************************************************************************/
+static void __dead2 qemu_system_off(void)
+{
+	mmio_write_32(SBSA_SECURE_EC_OFFSET, SBSA_SECURE_EC_CMD_SHUTDOWN);
+	panic();
+}
+
+static void __dead2 qemu_system_reset(void)
+{
+	mmio_write_32(SBSA_SECURE_EC_OFFSET, SBSA_SECURE_EC_CMD_REBOOT);
+	panic();
+}
+
+static const plat_psci_ops_t plat_qemu_psci_pm_ops = {
+	.cpu_standby = qemu_cpu_standby,
+	.pwr_domain_on = qemu_pwr_domain_on,
+	.pwr_domain_off = qemu_pwr_domain_off,
+	.pwr_domain_pwr_down_wfi = qemu_pwr_domain_pwr_down_wfi,
+	.pwr_domain_suspend = qemu_pwr_domain_suspend,
+	.pwr_domain_on_finish = qemu_pwr_domain_on_finish,
+	.pwr_domain_suspend_finish = qemu_pwr_domain_suspend_finish,
+	.system_off = qemu_system_off,
+	.system_reset = qemu_system_reset,
+	.validate_power_state = qemu_validate_power_state
+};
+
+int plat_setup_psci_ops(uintptr_t sec_entrypoint,
+			const plat_psci_ops_t **psci_ops)
+{
+	uintptr_t *mailbox = (uintptr_t *)PLAT_QEMU_TRUSTED_MAILBOX_BASE;
+
+	*mailbox = sec_entrypoint;
+	secure_entrypoint = (unsigned long)sec_entrypoint;
+	*psci_ops = &plat_qemu_psci_pm_ops;
+
+	return 0;
+}

source/trusted-firmware/trusted-firmware-a-2.8/plat/qemu/qemu_sbsa/sbsa_private.h

@@ -0,0 +1,17 @@
+/*
+ * Copyright (c) 2020, Nuvia Inc
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SBSA_PRIVATE_H
+#define SBSA_PRIVATE_H
+
+#include <stdint.h>
+
+unsigned int plat_qemu_calc_core_pos(u_register_t mpidr);
+
+void qemu_pwr_gic_on_finish(void);
+void qemu_pwr_gic_off(void);
+
+#endif /* SBSA_PRIVATE_H */

source/trusted-firmware/trusted-firmware-a-2.8/plat/qemu/qemu_sbsa/sbsa_topology.c

@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2020, Nuvia Inc
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <common/debug.h>
+
+#include <platform_def.h>
+#include "sbsa_private.h"
+
+/* The power domain tree descriptor */
+static unsigned char power_domain_tree_desc[PLATFORM_CLUSTER_COUNT + 1];
+
+/*******************************************************************************
+ * This function returns the sbsa-ref default topology tree information.
+ ******************************************************************************/
+const unsigned char *plat_get_power_domain_tree_desc(void)
+{
+	unsigned int i;
+
+	power_domain_tree_desc[0] = PLATFORM_CLUSTER_COUNT;
+
+	for (i = 0U; i < PLATFORM_CLUSTER_COUNT; i++) {
+		power_domain_tree_desc[i + 1] = PLATFORM_MAX_CPUS_PER_CLUSTER;
+	}
+
+	return power_domain_tree_desc;
+}
+
+/*******************************************************************************
+ * This function implements a part of the critical interface between the psci
+ * generic layer and the platform that allows the former to query the platform
+ * to convert an MPIDR to a unique linear index. An error code (-1) is returned
+ * in case the MPIDR is invalid.
+ ******************************************************************************/
+int plat_core_pos_by_mpidr(u_register_t mpidr)
+{
+	unsigned int cluster_id, cpu_id;
+
+	mpidr &= MPIDR_AFFINITY_MASK;
+	if ((mpidr & ~(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK)) != 0U) {
+		ERROR("Invalid MPIDR\n");
+		return -1;
+	}
+
+	cluster_id = (mpidr >> MPIDR_AFF1_SHIFT) & MPIDR_AFFLVL_MASK;
+	cpu_id = (mpidr >> MPIDR_AFF0_SHIFT) & MPIDR_AFFLVL_MASK;
+
+	if (cluster_id >= PLATFORM_CLUSTER_COUNT) {
+		ERROR("cluster_id >= PLATFORM_CLUSTER_COUNT define\n");
+		return -1;
+	}
+
+	if (cpu_id >= PLATFORM_MAX_CPUS_PER_CLUSTER) {
+		ERROR("cpu_id >= PLATFORM_MAX_CPUS_PER_CLUSTER define\n");
+		return -1;
+	}
+
+	return plat_qemu_calc_core_pos(mpidr);
+}