/*
 * Copyright (c) XMEDIA. All rights reserved.
 */

#ifndef _UAPI_LINUX_I2C_DEV_H
#define _UAPI_LINUX_I2C_DEV_H

/* /dev/i2c-X ioctl commands.  The ioctl's parameter is always an
 * unsigned long, except for:
 *	- I2C_FUNCS, takes pointer to an unsigned long
 *	- I2C_RDWR, takes pointer to struct i2c_rdwr_ioctl_data
 *	- I2C_SMBUS, takes pointer to struct i2c_smbus_ioctl_data
 */
#define I2C_RETRIES	0x0701	/* number of times a device address should
				   be polled when not acknowledging */
#define I2C_TIMEOUT	0x0702	/* set timeout in units of 10 ms */

/* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses
 * are NOT supported! (due to code brokenness)
 */
#define I2C_SLAVE	0x0703	/* Use this slave address */
#define I2C_SLAVE_FORCE	0x0706	/* Use this slave address, even if it
				   is already in use by a driver! */
#define I2C_TENBIT	0x0704	/* 0 for 7 bit addrs, != 0 for 10 bit */

#define I2C_FUNCS	0x0705	/* Get the adapter functionality mask */

#define I2C_RDWR	0x0707	/* Combined R/W transfer (one STOP only) */

#define I2C_PEC		0x0708	/* != 0 to use PEC with SMBus */
#define I2C_SMBUS	0x0720	/* SMBus transfer */
#define I2C_16BIT_REG   0x0709  /* 16BIT REG WIDTH */
#define I2C_16BIT_DATA  0x070a  /* 16BIT DATA WIDTH */

/* This is the structure as used in the I2C_RDWR ioctl call */
struct i2c_rdwr_ioctl_data {
	struct i2c_msg  *msgs;	/* pointers to i2c_msgs */
	__u32 nmsgs;			/* number of i2c_msgs */
};

#define  I2C_RDRW_IOCTL_MAX_MSGS	42


#endif /* _UAPI_LINUX_I2C_DEV_H */